Lightest Exhaust, Headers, and Front/Over/Mid Pipes?

[maca]

take a look for 1320 Performance UEL Headers and Overpipe

http://www.ft86club.com/forums/showp...1&postcount=19

6.30kg (13.89 lbs) for headers,
1.42kg ( 3.13 lbs) for Overpipe

[Anthony]

Originally Posted by maca

take a look for 1320 Performance UEL Headers and Overpipe

http://www.ft86club.com/forums/showp...1&postcount=19

6.30kg (13.89 lbs) for headers,
1.42kg ( 3.13 lbs) for Overpipe

Thank you, sir. Updated.

[Chenjovi]

hey guys, if you want to add the OFH headers to the list weight was in KG which works out to be approx 10.5lbs - i also have the overpipe but did not even register on the scale.

[nova.86]

Anybody have the weight of the HKS Dual Resonated Front Pipe? I have the Tomei Unreonated Front Pipe that weighs 3lbs. Which is 9lbs lighter than stock. It's too loud for me though so I'm trying to get a quite lightweight front pipe that's resonated. Looking into the HKS Dual type. I tried looking for a resonated titanium front pipe but couldn't really find one so I'm considering HKS, I'm just afraid it being dual resonated it'll weigh a lot.

[NARFALICIOUS]

Anybody know which of the catbacks below 30lbs is the tamest? i.e. least loud?

[86geek]

Originally Posted by NARFALICIOUS

Anybody know which of the catbacks below 30lbs is the tamest? i.e. least loud?

Least loud for me my Perrin 2.5 resonated but it's 33 pounds.

[Icecreamtruk]

Originally Posted by NARFALICIOUS

Anybody know which of the catbacks below 30lbs is the tamest? i.e. least loud?

TRD is pretty tame as well, its around 30-32 lbs if I remember correctly.

[MileMonger]

Originally Posted by NARFALICIOUS

Anybody know which of the catbacks below 30lbs is the tamest? i.e. least loud?

Possibly the Q300, but it's 39 lbs. I hear the nameless Axleback is pretty quiet too and you can mate it with a light midpipe.

OP, the FT86speedfactory UEL catted headers are 13.0 lbs, as per: http://www.ft86speedfactory.com/ft86...E#.Wc10Yp8pDqA



Sent from my SM-G930T using Tapatalk

[DAEMANO]

Originally Posted by NARFALICIOUS

Anybody know which of the catbacks below 30lbs is the tamest? i.e. least loud?

Not to jump on the hype train, but I think the ACE Laguna 90 is 32 lbs and designed to be super quiet at WOT. They quote 90db at 6k RPM which would be damn quiet for an aftermarket exhaust running wide open.

http://www.aceheader.com/index.php/p...-system-detail

[justinco]

My Blitz Nur-Spec VSR dual exhaust weighs 35lbs if it can be added.

[ame]http://youtu.be/sQP1YXCU3UA?t=4m35s[/ame]

[Chriswongbrz]

Theres a lot of headers and exhaust that’s not on there like the tomei and ace or anaconda

Originally Posted by Anthony

Thanks everybody who's contributed information. If you would like to add information, please link your source of information, or better yet: post a photo of the part on a scale like in the official weight thread. If you don't give me a source, I will use your post as the source. We're thorough around here!

I've also decided to color code parts by diameter. Matching colors = less turbulence = minimized loss of horsepower
2.118"/53.8mm, 2.25"/57.15mm 2.36"/60mm, 2.38"/60.5mm, 2.5"/63.5mm, 2.76"/70.1mm, 3.15"/80mm Unknown

***Note that some measurements may be inner diameter, and some may be outer diameter. Check your sources if diameter is a concern to you, which it should be if you want hp/tq gains***

Headers:
30.00lbs - FA20Club (Source)
21.10lbs - Greddy Catted (Source)
20.90lbs - Stock (Source)
16.30lbs - Greddy Catless (Source)
14.00lbs - Hotpipes Forceworks UEL Header (Source)
13.89lbs - 1320 UEL (Source)
13.65lbs - HKS EL (Source)
13.00lbs - JDL (Source)
12.65lbs - T1R (Source)
12.00lbs - Rev Works (Source)
10.90lbs - Nameless Stepped 1.500-1.625 Catted (Source)
10.20lbs - Borla UEL (Source)

Over Pipes:
11.4lbs - Nameless Over/Front Pipe Combo catted resonated (Source)
6.70lbs - Borla Cat Delete Pipes (Front & Over combo) (Source)
4.50lbs - Stock (Source)
3.50lbs - Milltek Sport (Source)
3.50lbs - Perrin (Source)
3.13lbs - 1320 (Source)
3.00lbs - PLM Overpipe (Source)
2.94lbs - Avo Turbo World ceramic coated (Source)

Front Pipes:
12.2lbs - Stock (Source)
11.4lbs - Nameless Over/Front Pipe Combo catted resonated (Source)
09.0lbs - Avo Turbo World catted (Source)
07.8lbs - Tsudo (Source)
07.2lbs - Invidia catless resonated (Source) (Diameter)
07.0lbs - PLM with high flow cat (Source)
06.7lbs - Borla Cat Delete Pipes (Front & Over combo) (Source)
05.2lbs - T1R (Source: PM from FT-86 SpeedFactory)
03.1lbs - Tomei (Source)
02.2lbs - Amuse (Source)

Mid Pipes:
12.40lbs - Stock (Source)
12.35lbs - Tsudo (Source)
08.60lbs - Invidia as used on N1 and Q300 (Source) (Diameter)
07.50lbs - Tommy Kaira Titanium (Source)

Catback Exhausts:
40.80lbs - MXP Prototype (Source)
39.00lbs - Invidia Q300 (Source) (Diameter)
38.50lbs - Stock (Source) (Diameter)
36.60lbs - HKS Legamax Premium (Source)
36.40lbs - Magnaflow (Source)
34.80lbs - GReddy EVO3 (Source)
33.95lbs - Tsudo (Source)
33.60lbs - Isis Street (Source)
33.60lbs - Perrin Dual Single Tip (Source)
33.40lbs - Berk (Source)
33.00lbs - TRD USA (Source) (Diameter?)
31.00lbs - Milltek Sport Resonated (Source)
30.80lbs - GReddy/TRUST CS GTS V2 (Source)
29.20lbs - Dezod Motorsports Dual Exit (Source)
29.00lbs - Invidia N1 (Source) (Diameter)
28.00lbs - Milltek Sport Non-Resonated (Source)
28.00lbs - Borla (Source)
26.00lbs - FT86SpeedFactory V2 (Source)
25.20lbs - Agency Power (Source)
22.00lbs - HKS Hi-Power (Source) (Diameter)
22.00lbs - Tanabe Concept G (Source) (Diameter)
21.60lbs - Tommy Kaira Titanium (Source)
18.00lbs - Buddy Club Spec II (Source) (Diameter)
17.08lbs - This Thing
16.53lbs - Panda Performance Titanium (Source)
16.10lbs - Tomei 80 (Source)
15.43lbs - TO-YO-07 (Source)
14.10lbs - Tomei 60S (Source)
<12.0lbs - T1R 70RT Titanium (Limited time group buy, get it while you can!)
10.20lbs - Tomei 60R (Source) Although mine weighs 9.98lbs - photo
09.70lbs - STM Aluminum Dual Exit (Source)
08.40lbs - Amuse R1000 Single Exit (Source)

2.118"/53.8mm, 2.25"/57.15mm 2.36"/60mm, 2.38"/60.5mm, 2.5"/63.5mm, 2.76"/70.1mm, 3.15"/80mm Unknown



Based on all this information, the factory engine back system weighs 76.1lbs. The current lightest combination is:

Borla UEL headers, Avo over pipe, Amuse front and catback sytem for a total of 23.74lbs, saving 52.36lbs from stock.

[Anthony]

Originally Posted by justinco

My Blitz Nur-Spec VSR dual exhaust weighs 35lbs if it can be added.

Where in the video does it say the weight?

Originally Posted by Chriswongbrz

Theres a lot of headers and exhaust that’s not on there like the tomei and ace or anaconda

Just get me the info.

[justinco]

Originally Posted by Anthony

Where in the video does it say the weight?

Right at the time that I linked. I weighed both exhaust parts right before that.

[why?]

Originally Posted by Chriswongbrz

Theres a lot of headers and exhaust that’s not on there like the tomei and ace or anaconda

This was done a few years ago. If you know the weights post them.