*PHASTEK* High / Low Beam Fog Lights for the FR-S & BRZ - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

PhastekSport · 10-28-2013, 10:21 PM

There was enough interest in the original thread to start a sales thread.

*PREORDER THREAD*

These are glass projector housings that are available in two forms:

Low Beam Only
Low / High Beam (mechanical flap similar to FR-S headlight retrofits)

[ame]http://youtu.be/Nz1WJb8dZuc[/ame]

Casings Only (pair)

Low - $65.95
Low / High - $70.95

FR-S Bezels

$46.95 with kit

HID Kit (4.3k, 5k, 6k, 8k w/ AC Ballasts)

$64.95 with kit

As usual, all orders above $99 ship for free. In the picture above it is show with an H11 HID kit installed (35w).

I need to work out pricing to put a bunch of pieces together to make plug and play kits for both vehicle applications.

Sunday - Saturday of this upcoming week I'll be at SEMA so I must spend some of the nights with family leading up to that. I'll keep this thread in mind though and try to figure out all the combinations.

*PREORDER STATUS*

There is a minimum amount we have to commit to. It's not a large number. A little interest will get them on their way.

I need to know the break down between low only and high/low. This will help me purchase an appropriate amount of each.

Interest List

Shutter
ucsmfu
Charky
tekkenman
Asphault~86
sav
tonystewart

tonystewart · 10-28-2013, 10:37 PM

You have my attention

continuecrushing · 10-29-2013, 09:13 PM

I'm for sure in on a high/low beam kit with frs bezels and hid kit

ucsmfu · 10-30-2013, 12:33 AM

I'm in as well, any closer pics of the low beam projector lens only ?

thanks

Alain · 10-30-2013, 01:39 AM

Chris

How much for the low beam projector and bezel??

Thanks
Alain

PhastekSport · 10-30-2013, 11:30 AM

Ahhh my vendor status has been removed. It said it expired today, but I paid it at 7PM CST.

At least this thread is still up.

The low beam housings + bezels would be $112.90. You can take another 5% off for being an ft86club member. At this point all invoices would have to be done manually by yours truly. Feel free to PM me.

The low beam projector would look exactly like the high. However you wouldn't see the mechanical flap on the inside. I'll see if I can get pictures of that.

EDIT: They confirmed. Outward appearance is the exact same. Same beam pattern without the flap.

EDIT #2: I have a picture of the beam pattern for the low beam fog light. Note that the projectors were on a table and that is why they are aimed so high. You can adjust the aim via screws on the side of the bracket. They can be accessed by removing the bezel on the FRS.

Adjustment screw:

ucsmfu · 11-02-2013, 10:23 PM

any pics on the BRZ and how is the fitment ? oem ? plug and play ? thnx

ucsmfu · 11-03-2013, 04:04 PM

Quote:

Originally Posted by Chris@Phastek

Ahhh my vendor status has been removed. It said it expired today, but I paid it at 7PM CST.

At least this thread is still up.

The low beam housings + bezels would be $112.90. You can take another 5% off for being an ft86club member. At this point all invoices would have to be done manually by yours truly. Feel free to PM me.

The low beam projector would look exactly like the high. However you wouldn't see the mechanical flap on the inside. I'll see if I can get pictures of that.

EDIT: They confirmed. Outward appearance is the exact same. Same beam pattern without the flap.

EDIT #2: I have a picture of the beam pattern for the low beam fog light. Note that the projectors were on a table and that is why they are aimed so high. You can adjust the aim via screws on the side of the bracket. They can be accessed by removing the bezel on the FRS.

Adjustment screw:

any pics on the BRZ and how is the fitment ? oem ? plug and play ? thnx

ucsmfu · 11-13-2013, 05:42 PM

any updates ?

PhastekSport · 11-13-2013, 05:58 PM

They required the minimum purchase to 18 pairs, and we have not generated enough interest yet.

Charky · 11-16-2013, 10:44 AM

Quote:

Originally Posted by Chris@Phastek

They required the minimum purchase to 18 pairs, and we have not generated enough interest yet.

Im interested

continuecrushing · 11-16-2013, 09:05 PM

Lets get more people going on this!!!

PhastekSport · 11-18-2013, 10:14 AM

Updated list...

If some BRZ owners were interested in H11 to 5202 plug and play harnesses....

http://goo.gl/F55Qjb

continuecrushing · 11-29-2013, 01:22 AM

bump...come on people, Hi/Lo fog lights?!!!!!

Lets get this going!!!

10-28-2013, 10:21 PM	#1
PhastekSport Join Date: Sep 2012 Drives: 2013 Scion FR-S Location: Houston, TX Posts: 940 Thanks: 53 Thanked 696 Times in 284 Posts Mentioned: 74 Post(s) Tagged: 0 Thread(s)	PHASTEK High / Low Beam Fog Lights for the FR-S & BRZ There was enough interest in the original thread to start a sales thread. *PREORDER THREAD* These are glass projector housings that are available in two forms: Low Beam Only Low / High Beam (mechanical flap similar to FR-S headlight retrofits) [ame]http://youtu.be/Nz1WJb8dZuc[/ame] Casings Only (pair) Low - $65.95 Low / High - $70.95 FR-S Bezels $46.95 with kit HID Kit (4.3k, 5k, 6k, 8k w/ AC Ballasts) $64.95 with kit As usual, all orders above $99 ship for free. In the picture above it is show with an H11 HID kit installed (35w). I need to work out pricing to put a bunch of pieces together to make plug and play kits for both vehicle applications. Sunday - Saturday of this upcoming week I'll be at SEMA so I must spend some of the nights with family leading up to that. I'll keep this thread in mind though and try to figure out all the combinations. *PREORDER STATUS* There is a minimum amount we have to commit to. It's not a large number. A little interest will get them on their way. I need to know the break down between low only and high/low. This will help me purchase an appropriate amount of each. Interest List Shutter ucsmfu Charky tekkenman Asphault~86 sav tonystewart Last edited by PhastekSport; 12-11-2013 at 10:45 AM.

10-30-2013, 11:30 AM	#6
PhastekSport Join Date: Sep 2012 Drives: 2013 Scion FR-S Location: Houston, TX Posts: 940 Thanks: 53 Thanked 696 Times in 284 Posts Mentioned: 74 Post(s) Tagged: 0 Thread(s)	Ahhh my vendor status has been removed. It said it expired today, but I paid it at 7PM CST. At least this thread is still up. The low beam housings + bezels would be $112.90. You can take another 5% off for being an ft86club member. At this point all invoices would have to be done manually by yours truly. Feel free to PM me. The low beam projector would look exactly like the high. However you wouldn't see the mechanical flap on the inside. I'll see if I can get pictures of that. EDIT: They confirmed. Outward appearance is the exact same. Same beam pattern without the flap. EDIT #2: I have a picture of the beam pattern for the low beam fog light. Note that the projectors were on a table and that is why they are aimed so high. You can adjust the aim via screws on the side of the bracket. They can be accessed by removing the bezel on the FRS. Adjustment screw: Last edited by PhastekSport; 10-30-2013 at 12:57 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DRL / High Beam LED bulbs	Gps360	Cosmetic Modification (Interior/Exterior/Lighting)	7	09-04-2013 10:50 PM
DRL or high beam or both?	jacobzking	Cosmetic Modification (Interior/Exterior/Lighting)	5	06-09-2013 04:09 PM
HID and high beam use	gatorbushmen	Cosmetic Modification (Interior/Exterior/Lighting)	4	04-19-2013 05:56 PM
High beam/LED question	Trashed675	Cosmetic Modification (Interior/Exterior/Lighting)	15	01-20-2013 01:46 PM

10-28-2013, 10:37 PM	#2
tonystewart Senior Member Join Date: May 2012 Drives: 2013 Scion FR-S Raven Location: Lake Worth Florida Posts: 1,182 Thanks: 76 Thanked 373 Times in 253 Posts Mentioned: 13 Post(s) Tagged: 1 Thread(s)	You have my attention __________________ May'12 AT Raven, OFT V2, Perrin IntakeTube, Pulley & Overpipe,HKS Snorkel,FA20 EL Header,Nameless Frontpipe w/ Helmholtz, Crawford AOS, Cusco O2W Cooler, Grimmspeed Strut/MC Brace, Winjets w/D2S 3.0 HID by Illuminating Lighworkx, Fogs w/EU Stalk, LED's, JDM UnderPanels, Diffuser, Rigid Collars, Whiteline, HVT Camber Plates, Koni's, Swift Springs, GTSpec LCA, SPC Toearms, DBA 4K T-Slot Rotors, Ferodo DS2500, Vorshlag BrakeLines, MichelinPSS, 5Axis Wing, Raammat, Ensolite, JPM Coachworks, OEM+Ref400, 20mmspacers, TOMS

10-29-2013, 09:13 PM	#3
continuecrushing Join Date: Mar 2013 Drives: 2013 Firestorm FRS Location: Lake Elsinore, CA Posts: 2,707 Thanks: 1,231 Thanked 2,144 Times in 1,003 Posts Mentioned: 73 Post(s) Tagged: 2 Thread(s)	I'm for sure in on a high/low beam kit with frs bezels and hid kit

10-30-2013, 12:33 AM	#4
ucsmfu Senior Member Join Date: Aug 2013 Drives: BRZ Limited Location: vancouver Posts: 518 Thanks: 60 Thanked 107 Times in 69 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	I'm in as well, any closer pics of the low beam projector lens only ? thanks

11-02-2013, 10:23 PM	#7
ucsmfu Senior Member Join Date: Aug 2013 Drives: BRZ Limited Location: vancouver Posts: 518 Thanks: 60 Thanked 107 Times in 69 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	any pics on the BRZ and how is the fitment ? oem ? plug and play ? thnx

11-13-2013, 05:42 PM	#9
ucsmfu Senior Member Join Date: Aug 2013 Drives: BRZ Limited Location: vancouver Posts: 518 Thanks: 60 Thanked 107 Times in 69 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	any updates ?

11-13-2013, 05:58 PM	#10
PhastekSport Join Date: Sep 2012 Drives: 2013 Scion FR-S Location: Houston, TX Posts: 940 Thanks: 53 Thanked 696 Times in 284 Posts Mentioned: 74 Post(s) Tagged: 0 Thread(s)	They required the minimum purchase to 18 pairs, and we have not generated enough interest yet.

11-16-2013, 09:05 PM	#12
continuecrushing Join Date: Mar 2013 Drives: 2013 Firestorm FRS Location: Lake Elsinore, CA Posts: 2,707 Thanks: 1,231 Thanked 2,144 Times in 1,003 Posts Mentioned: 73 Post(s) Tagged: 2 Thread(s)	Lets get more people going on this!!!

11-18-2013, 10:14 AM	#13
PhastekSport Join Date: Sep 2012 Drives: 2013 Scion FR-S Location: Houston, TX Posts: 940 Thanks: 53 Thanked 696 Times in 284 Posts Mentioned: 74 Post(s) Tagged: 0 Thread(s)	Updated list... If some BRZ owners were interested in H11 to 5202 plug and play harnesses.... http://goo.gl/F55Qjb

11-29-2013, 01:22 AM	#14
continuecrushing Join Date: Mar 2013 Drives: 2013 Firestorm FRS Location: Lake Elsinore, CA Posts: 2,707 Thanks: 1,231 Thanked 2,144 Times in 1,003 Posts Mentioned: 73 Post(s) Tagged: 2 Thread(s)	bump...come on people, Hi/Lo fog lights?!!!!! Lets get this going!!!

User Name		Remember Me?
Password