*PHASTEK* High / Low Beam Fog Lights for the FR-S & BRZ
 

There was enough interest in the original thread to start a sales thread.

*PREORDER THREAD*

These are glass projector housings that are available in two forms:

1. Low Beam Only
2. Low / High Beam (mechanical flap similar to FR-S headlight retrofits)

http://i805.photobucket.com/albums/y...ps1d0feb50.jpg

http://i805.photobucket.com/albums/y...ps22e47555.jpg

http://i805.photobucket.com/albums/y...ps23c41cf2.jpg

http://2.bp.blogspot.com/-r4h2BgEZhw...551-2007HL.jpg

[ame]http://youtu.be/Nz1WJb8dZuc[/ame]


Casings Only (pair)

Low - $65.95
Low / High - $70.95

FR-S Bezels

$46.95 with kit

HID Kit (4.3k, 5k, 6k, 8k w/ AC Ballasts)

$64.95 with kit

As usual, all orders above $99 ship for free. In the picture above it is show with an H11 HID kit installed (35w).

I need to work out pricing to put a bunch of pieces together to make plug and play kits for both vehicle applications.

Sunday - Saturday of this upcoming week I'll be at SEMA so I must spend some of the nights with family leading up to that. I'll keep this thread in mind though and try to figure out all the combinations.

*PREORDER STATUS*

There is a minimum amount we have to commit to. It's not a large number. A little interest will get them on their way.

I need to know the break down between low only and high/low. This will help me purchase an appropriate amount of each.



Interest List

1. Shutter
2. ucsmfu
3. Charky
4. tekkenman
5. Asphault~86
6. sav
7. tonystewart
   

You have my attention

I'm for sure in on a high/low beam kit with frs bezels and hid kit

I'm in as well, any closer pics of the low beam projector lens only ?

thanks :)

Chris

How much for the low beam projector and bezel??

Thanks
Alain

Ahhh my vendor status has been removed. It said it expired today, but I paid it at 7PM CST.

At least this thread is still up.

The low beam housings + bezels would be $112.90. You can take another 5% off for being an ft86club member. At this point all invoices would have to be done manually by yours truly. Feel free to PM me.

The low beam projector would look exactly like the high. However you wouldn't see the mechanical flap on the inside. I'll see if I can get pictures of that.

EDIT: They confirmed. Outward appearance is the exact same. Same beam pattern without the flap.

EDIT #2: I have a picture of the beam pattern for the low beam fog light. Note that the projectors were on a table and that is why they are aimed so high. You can adjust the aim via screws on the side of the bracket. They can be accessed by removing the bezel on the FRS.

http://i805.photobucket.com/albums/y...ps36ca5293.jpg

Adjustment screw:

http://i805.photobucket.com/albums/y...pscced2642.jpg

any pics on the BRZ and how is the fitment ? oem ? plug and play ? thnx

any pics on the BRZ and how is the fitment ? oem ? plug and play ? thnx

any updates ?

They required the minimum purchase to 18 pairs, and we have not generated enough interest yet.

Im interested

Lets get more people going on this!!!

Updated list...

If some BRZ owners were interested in H11 to 5202 plug and play harnesses....

http://goo.gl/F55Qjb

bump...come on people, Hi/Lo fog lights?!!!!!

Lets get this going!!!