*PHASTEK* Perrin Tuned Vortech Supercharger Install Thread (3 Vehicles, 3 Kits)

[dabocx]

Can you do a before and after dyno?

Im hoping to jump on this or avo soon, houston is a 5 hour drive away but its going to be worth it. Just wish i could get a drive in one first.

[PhastekSport]

Originally Posted by dabocx

Can you do a before and after dyno?

Im hoping to jump on this or avo soon, houston is a 5 hour drive away but its going to be worth it. Just wish i could get a drive in one first.

We'll show the comparison. Since we'll probably be sending back the units before receiving the new ones (unless someone does a core charge), there will most likely not be a right before the new unit dyno. All of ours are SAE corrected so results should be pretty accurate.



We can scratch the alternator tilt bracket from the list.

The silver portion shows the area that is different.

These were sent overnight from Vortech.

Sent from my SCH-I605 using Tapatalk 2

[Huehuecoyotl]

so, just for the record, not wanting to pollute or start controversy, but just want to clarify:

10psi on the 'old' stage1 impeller/compressor at 10psi is NOT The same as 10psi on the new stage2 compressor/impeller

the older design was built to offer overboost protection, and runs outta breath at 9psi+

the 10psi kit I'm on with Perrins tune will be dyno'd by me Tuesday coming, and the curves look very different, as do the boost plots, so everything before 7500 rpms and before 9/10 psi looks way different on those charts too

Originally Posted by 2forme

Visconti had already posted somewhere that the 10psi kit doesn't make much more than the 7psi kit on pump gas. From the look of that curve, it's pulling something up top because ECU doesn't like what it's seeing. Look at the smoothness of the base dynos in comparison.

I do not think John Visconti has thge same kit as me or Jeff, tho I am sure that will change in time
There is a huge difference between 7psi and 10psi on my vortech kit-while I cant comment on absolute peak power without dynos, every psi DOES matter

[2forme]

Originally Posted by Huehuecoyotl

I do not think John Visconti has thge same kit as me or Jeff, tho I am sure that will change in time
There is a huge difference between 7psi and 10psi on my vortech kit-while I cant comment on absolute peak power without dynos, every psi DOES matter

I think you should double check that before posting .

[Huehuecoyotl]

Originally Posted by 2forme

I think you should double check that before posting .

Well, I hope he is having as much fun with this kit past 10psi as I am..(next weeks testing! Cant wait!)

[PhastekSport]

Keep on doing the leg work so when we get the new compressor the tune will be perfect :-).

[Huehuecoyotl]

Originally Posted by Chris@Phastek

Keep on doing the leg work so when we get the new compressor the tune will be perfect :-).

One thing we ALL agree on is this kit is silly sweet. Wait till you start to giggle while you drive it at like all rpms...

[F1point4]

It's Here

Is this the first Vortech kit with a header?

Thanks Jeremy at @FT-86 SpeedFactory for the awesome as always service.


20130322-BorlaHeaderTeaser-047 by VictorN07, on Flickr


20130322-BorlaHeaderTeaser-048 by VictorN07, on Flickr

[Adeets]

Originally Posted by F1point4

It's Here

Is this the first Vortech kit with a header?

Thanks Jeremy at @FT-86 SpeedFactory for the awesome as always service.

20130322-BorlaHeaderTeaser-048 by VictorN07, on Flickr

Quick Q, will this header make the boxer burble more pronounced? I mean cuz it seems to be WAY UEL... I kinda miss it on the BRZ.

[Opposed]

Originally Posted by Adeets

Quick Q, will this header make the boxer burble more pronounced? I mean cuz it seems to be WAY UEL... I kinda miss it on the BRZ.

Yes it will. Have you not seen the videos? [ame="http://www.youtube.com/watch?v=nrJ_CTdHANo"]Borla UEL Header for the Scion FRS and Subaru BRZ - In Car - YouTube[/ame]

[Adeets]

Originally Posted by Opposed

Yes it will. Have you not seen the videos?

Why no i have not, thank you.

[Opposed]

Originally Posted by Adeets

Why no i have not, thank you.

Sounds pretty B.A. huh?

[Adeets]

Originally Posted by Opposed

Sounds pretty B.A. huh?

Just listened to it in the office, it's exactly what I want... Lemme guess no cat though... Think I could pass emissions with it?

Was stuck on the floor most of the day, got called in because the robots were trying to throw cases at the operators... Apparently they hate the operators as much as I do.

[Opposed]

Originally Posted by Adeets

Just listened to it in the office, it's exactly what I want... Lemme guess no cat though... Think I could pass emissions with it?

Was stuck on the floor most of the day, got called in because the robots were trying to throw cases at the operators... Apart entry they hate the operators as much as I do.

Sorry man, no cats for the Bolra's from what I remember. I don't know about passing the emissions part. Maybe if you kept the cat in the front pipe???