Decay's Ultramarine Trackrat - Page 7 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Decay107 · 01-08-2016, 06:01 PM

For fun you should put on my '13 tips, now THAT would be invisible!

johan · 01-11-2016, 02:49 PM

Gross

Decay107 · 01-23-2016, 02:48 AM

I've always hated the clearbra on my car. Pissed me off to look at, pissed me off during detailing, so today it came off.

Good riddance.

digital_assassin · 01-23-2016, 04:19 AM

That was the first thing to come off mine. Didn't even make it a day. Rock chips were are all on the back half of the hood and the roof and trunk when I sold it. The nose was clean.

Decay107 · 01-23-2016, 02:21 PM

Yeah I have no idea why it took me this long, actually enjoyed detailing the car last night for what is probably the first time.

Aztec · 01-23-2016, 03:24 PM

Didn't realize you had RPF1s in storage for summer! Side-note exhaust question, what do you think causes the burble the most? Header, OP, FP? I'm in a similar boat where I want to keep the stock catback, but i'm considering putting on a different OP/FP

Decay107 · 01-23-2016, 04:57 PM

Quote:

Originally Posted by Aztec

Didn't realize you had RPF1s in storage for summer! Side-note exhaust question, what do you think causes the burble the most? Header, OP, FP? I'm in a similar boat where I want to keep the stock catback, but i'm considering putting on a different OP/FP

Header is only thing that causes burble really, FP (and to a much lesser extent the OP) only tend to amplify the sound of any given header.

PERRIN_Chris · 01-26-2016, 01:27 PM

Quote:

Originally Posted by Decay107

I've always hated the clearbra on my car. Pissed me off to look at, pissed me off during detailing, so today it came off.

Good riddance.

I love this, I drove my car for 20,000+ miles of mostly backroads driving at just about highway speeds, and just had a few really small rock chips that you couldn't see unless you were less than a foot away. I did get a small rock ding on the windshield only after a year though!

Isn't it crazy that some people are so paranoid that they won't even drive their car until they get one installed!?

Decay107 · 01-26-2016, 01:47 PM

Quote:

Originally Posted by PERRIN_Chris

I love this, I drove my car for 20,000+ miles of mostly backroads driving at just about highway speeds, and just had a few really small rock chips that you couldn't see unless you were less than a foot away. I did get a small rock ding on the windshield only after a year though!

Isn't it crazy that some people are so paranoid that they won't even drive their car until they get one installed!?

Yeah, I never really understood it either, had everyone tell me I was crazy when I expressed my desire to remove it based on how it looked. Plus the rock chips I get are either much higher up on the hood that a 1/3 clearbra will cover, or on the A pillars.

I am leaving it on the bumper though, it has and will continue to absorb large numbers of cone, gravel, and melted rubber hits given my activities

johan · 01-26-2016, 01:54 PM

Quote:

Originally Posted by Decay107

Yeah, I never really understood it either, had everyone tell me I was crazy when I expressed my desire to remove it based on how it looked. Plus the rock chips I get are either much higher up on the hood that a 1/3 clearbra will cover, or on the A pillars.

I am leaving it on the bumper though, it has and will continue to absorb large numbers of cone, gravel, and melted rubber hits given my activities

Yeah - my poor bumper - omg. I should have gotten clear bra just for the bumper. It's so whack now. The hood - meh.

Decay107 · 01-26-2016, 02:11 PM

Quote:

Originally Posted by johan

Yeah - my poor bumper - omg. I should have gotten clear bra just for the bumper. It's so whack now. The hood - meh.

I'm sure following a little too close on drives may have something to do with that!

But yeah, when I look close at the clear-bra on my bumper, it looks like someone stood about 3 feet away and went to town with an airsoft gun.

Ultramaroon · 01-26-2016, 02:30 PM

Quote:

Originally Posted by johan

Yeah - my poor bumper - omg. I should have gotten clear bra just for the bumper. It's so whack now. The hood - meh.

Just collect dings for a few more years and get it repainted. That's my plan.

Quote:

Originally Posted by Decay107

I'm sure following a little too close on drives may have something to do with that!

Pro tip: The skinny pedal on the right side makes the car go faster.

johan · 01-26-2016, 04:26 PM

Quote:

Originally Posted by Decay107

I'm sure following a little too close on drives may have something to do with that!

But yeah, when I look close at the clear-bra on my bumper, it looks like someone stood about 3 feet away and went to town with an airsoft gun.

Quote:

Originally Posted by Ultramaroon

Just collect dings for a few more years and get it repainted. That's my plan.

Yup, repaint is long term plan.

Quote:

Originally Posted by Ultramaroon

Pro tip: The skinny pedal on the right side makes the car go faster.

Tainen · 02-18-2016, 07:23 PM

curious on the exhaust changes, figuring you might be able to provide input on my changes/thinking, since you've experienced the nameless setup.

Currently I've got the Nameless header (first version), nameless catted OP with original can style resonator, and nameless axleback with 8" mufflers. Like you, I am VERY done with loud exhausts, this thing HOWLS non stop. So I ordered the perrin Catback hoping to reduce volume a bit- but is sending them my OP/FP to get the can replaced a necessary step as well to reduce volume? Hopefully I don't need to replace the header, it was quite expensive.

01-08-2016, 06:01 PM	#85
Decay107 Turning is for Nerds Join Date: Aug 2013 Drives: 35 characters is not enough Location: PDX Posts: 1,974 Thanks: 836 Thanked 1,259 Times in 717 Posts Mentioned: 186 Post(s) Tagged: 3 Thread(s)	For fun you should put on my '13 tips, now THAT would be invisible! __________________ My build thread / journal / evidence for warranty claim denial Motorcycle build thread

01-23-2016, 02:48 AM	#87
Decay107 Turning is for Nerds Join Date: Aug 2013 Drives: 35 characters is not enough Location: PDX Posts: 1,974 Thanks: 836 Thanked 1,259 Times in 717 Posts Mentioned: 186 Post(s) Tagged: 3 Thread(s)	I've always hated the clearbra on my car. Pissed me off to look at, pissed me off during detailing, so today it came off. Good riddance. __________________ My build thread / journal / evidence for warranty claim denial Motorcycle build thread

01-23-2016, 04:19 AM	#88
digital_assassin Senior Member Join Date: Feb 2011 Drives: 2013 FR-S Matte Orange Location: Portland, OR Posts: 2,016 Thanks: 489 Thanked 937 Times in 507 Posts Mentioned: 168 Post(s) Tagged: 0 Thread(s)	That was the first thing to come off mine. Didn't even make it a day. Rock chips were are all on the back half of the hood and the roof and trunk when I sold it. The nose was clean. __________________ NORTHWEST86 DECAL - NORTHWEST86 GEAR MY BUILD

01-23-2016, 02:21 PM	#89
Decay107 Turning is for Nerds Join Date: Aug 2013 Drives: 35 characters is not enough Location: PDX Posts: 1,974 Thanks: 836 Thanked 1,259 Times in 717 Posts Mentioned: 186 Post(s) Tagged: 3 Thread(s)	Yeah I have no idea why it took me this long, actually enjoyed detailing the car last night for what is probably the first time. __________________ My build thread / journal / evidence for warranty claim denial Motorcycle build thread

01-23-2016, 03:24 PM	#90
Aztec Lost in the twisties Join Date: Sep 2014 Drives: 2014 BRZ Dark Gray Metallic Location: Beaverton, OR Posts: 662 Thanks: 439 Thanked 298 Times in 188 Posts Mentioned: 33 Post(s) Tagged: 2 Thread(s)	Didn't realize you had RPF1s in storage for summer! Side-note exhaust question, what do you think causes the burble the most? Header, OP, FP? I'm in a similar boat where I want to keep the stock catback, but i'm considering putting on a different OP/FP __________________ NEW CAR!🚨🏎️⛽ 2014 BRZ: Edelbrock SC, CSG ZachTune, Jackson Radiator/Oil cooler, lightweight flywheel, CNT UEL, Berk OP/FP, Ark Grip Catback, Carbon fiber Driveshaft Aztec's Build Thread

01-11-2016, 02:49 PM	#86
johan Senior Member Join Date: Aug 2014 Drives: '14 981CS, '99 NB1 Location: Oregon Posts: 1,274 Thanks: 1,234 Thanked 1,201 Times in 631 Posts Mentioned: 114 Post(s) Tagged: 2 Thread(s)	Gross

02-18-2016, 07:23 PM	#98
Tainen Senior Member Join Date: Nov 2011 Drives: First SWP BRZ-L Location: Washington Posts: 809 Thanks: 154 Thanked 350 Times in 174 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	curious on the exhaust changes, figuring you might be able to provide input on my changes/thinking, since you've experienced the nameless setup. Currently I've got the Nameless header (first version), nameless catted OP with original can style resonator, and nameless axleback with 8" mufflers. Like you, I am VERY done with loud exhausts, this thing HOWLS non stop. So I ordered the perrin Catback hoping to reduce volume a bit- but is sending them my OP/FP to get the can replaced a necessary step as well to reduce volume? Hopefully I don't need to replace the header, it was quite expensive. __________________ First white BRZ in the country Limited SWP BRZ, 35% tint, clear bra, Nameless Performance downpipe, axelback, headers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Ultramarine FR-S	evilconcarne999	Member's Car Journals	25	07-14-2013 10:16 PM
ultramarine	Splat	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	3	05-14-2013 08:31 PM
AZ: Ultramarine 6MT FR-S FS 25k	Tujin	Cars for Sale/Trade	0	02-21-2013 07:37 PM
Ultramarine!	Loki556	AUSTRALIA	17	09-08-2012 09:27 PM
FrX's Ultramarine MT	FrX	Member's Car Journals	22	06-26-2012 06:53 AM

User Name		Remember Me?
Password