Wheel specs for Rocket Bunny Fenders

[sdwagonjp]

Originally Posted by jay1989

Avant Garde f100 and f200 series. They even come in -80 to +80 offsets and 5x100. And you can get the inner peice in pretty much whatever color you want. From time you order till they are delivered is about 6 to 8 weeks as they are made to order.

They are also a 3 piece wheel which turns a lot of people off but I personally prefer a 3 piece as they are lighter and can get them generally in whatever configuration you want.

Retail is pricey as shit but I found a super hookup on them through a buddy of mine so makes them "more" affordable but still pretty pricey.

Edit: just checked can get it all the way up to a 17x15 if you wanted lol

ccw does 17x16.5

[jay1989]

Back on topic though, what offset and backspacing would you need to run on the bunny with a 1" drop via v3's to get then 17x12 to fit under the ass w/ 315x35's w/o issues and not a lot of camber (some is acceptable but do not want a whole shit ton) also what about the fronts with a 17x10 and 275's w/ no camber or is that even possible?

[crildz]

9.5 et -5/-20 work with the v2 fenders?

[mikesagas]

anyone tried 18x12 +20 offset in the rear? im getting this type of wheels but i dont know if gonna work i have coilovers, anyone can help me?

[Kwise1]

Originally Posted by mikesagas

anyone tried 18x12 +20 offset in the rear? im getting this type of wheels but i dont know if gonna work i have coilovers, anyone can help me?

I'm running 18x10.5 plus 22 offset on Ksport coils pretty close to all the way down and 2 1/2 inch conversion spacers if this helps.

[Kwise1]

Your going to have to do a lot of cutting to the rear bumper piece just so you know

[mikesagas]

Originally Posted by Kwise1

I'm running 18x10.5 plus 22 offset on Ksport coils pretty close to all the way down and 2 1/2 inch conversion spacers if this helps.
Attachment 101011

thanks!! i thinking about getting these wheels with a 1.5 spacer? can make it with that size?

[mikesagas]

Originally Posted by Kwise1

Your going to have to do a lot of cutting to the rear bumper piece just so you know

cutting? not only the cutting for the rocket bunny wide body? explain please... and thanks!

[Kwise1]

Originally Posted by mikesagas

thanks!! i thinking about getting these wheels with a 1.5 spacer? can make it with that size?

I'm not sure what spacer size you'll need.
But consider this your wheels are 1 1/2 inches wider than mine
I'm using a 2 1/2 inch spacer to be flush with the fender
The camber I have is only from the coilover drop
So in your set up I would look into a 1 inch spacer but you also have to consider the offset of your wheels as well

[Kwise1]

Originally Posted by mikesagas

cutting? not only the cutting for the rocket bunny wide body? explain please... and thanks!

To fit the wheels flush with the fender you'll need to cut this part of the kit or it will rub.

[Cxlumpy]

Originally Posted by Kwise1

I'm running 18x10.5 plus 22 offset on Ksport coils pretty close to all the way down and 2 1/2 inch conversion spacers if this helps.
Attachment 101011

what tire size are you running?

[Kwise1]

245/35 all around

[AznKirby]

Do you guys think I can get away with not having LCA's in the rear, and just going with camber bolts? Or is that not enough adjustability?
I'll be at 18x10.5 -12 (+25mm spacers) in the rear. Probably 285 or 295 section tires.

Thanks!

[Kwise1]

I'm on coils in the rear with stock LCA 18x10.5 with a plus 22 and much bigger spacers than 25mm. It's fits fine after some trimming