OpenFlash Tablet: OTS v2.0 Beta (132 new maps, 12 new XMLs) Available for Download

[menikmati]

Originally Posted by MokSpeed

Okay noob question, but when it states to turn the key to ignition does that mean to start the car up as well?

Turn the key to the ON position, do not start the car.

[vgi]

@Shiv@Openflash

hey shiv, i'm curious if the OFT locked tunes ever got opened (eg OFT300, SBD - i remember there were some heated arguing on locked ecutek vs opened OFT tunes)?

[sirsol66]

Shiv, can you provide some feedback for this? Several people have had this issue on the OFT tunes.

http://www.ft86club.com/forums/showt...=1#post2067575

[FingR-S]

Originally Posted by sirsol66

Shiv, can you provide some feedback for this? Several people have had this issue on the OFT tunes.

http://www.ft86club.com/forums/showt...=1#post2067575

Ive been having a similar issue, but the car is already warmed up. (15 min of driving after initial warm up)
Ive had the stage 1 91oct - 1.59, 2.00 and now the ESC tunes and the car hesitates once in a while at WOT @ 4-5k rpms especially when I'm going ip a hill.
The only thing changed prior to any tune was the cat back Perrin exhaust, which did not contribute to any "misfiring" prior to tunes.
I'll have to send the file to someone and have them look at it since i don't have much experience with reading data logs.



Sent from my iPhone using Tapatalk

[ScionFrsFan]

Is there anything "special" the OFT could do to a automatic. I love my OFT...but could it change the way a auto shifts, ect be changed? Thank you!

[s2d4]

Originally Posted by ScionFrsFan

Is there anything "special" the OFT could do to a automatic. I love my OFT...but could it change the way a auto shifts, ect be changed? Thank you!

Manual paddles.

[Wayno]

Originally Posted by ScionFrsFan

Is there anything "special" the OFT could do to a automatic. I love my OFT...but could it change the way a auto shifts, ect be changed? Thank you!

Shittons:

Copy the throttle map from MT - this will save you fuel on E85
Add the soft rev limit same as MT
Use the paddles

[Shiv@Openflash]

Originally Posted by vgi

@Shiv@Openflash

hey shiv, i'm curious if the OFT locked tunes ever got opened (eg OFT300, SBD - i remember there were some heated arguing on locked ecutek vs opened OFT tunes)?

All OFT300, SBD, Phantom tunes that we have been providing since early this year (2014) have been unlocked (.bin format). As a matter of fact, I can't even remember the last time I sent out a FI tune file in .dev format.

[pl1ght]

So I got my OFH in, no probs. Flashed to with OFT 93 stg2 UEL. Still getting a p0037 and p0031 CEL, is that right? Thought the CELs should be cleared by tune?

[steve99]

Originally Posted by pl1ght

So I got my OFH in, no probs. Flashed to with OFT 93 stg2 UEL. Still getting a p0037 and p0031 CEL, is that right? Thought the CELs should be cleared by tune?

The code for cat efficiency is P0420.

The codes your getting are for 02 sensor heating circuit failed

iether the 02 sensors have been damaged or not plugged in correct sockets, they are colour coded plugs grey and black.

they should screw in by hand then tighten to required torque. its best to use a tread tap or chaser to clean the threads up before inserting , 02 sensors are easily damaged if you apply heaps of force

[Shiv@Openflash]

Originally Posted by pl1ght

So I got my OFH in, no probs. Flashed to with OFT 93 stg2 UEL. Still getting a p0037 and p0031 CEL, is that right? Thought the CELs should be cleared by tune?

Those are o2 sensor header control circuit codes. Those codes are bot turned off/disabled by the tune. I don't think you should be getting those with the header. if you clear them, do they come back?

[pl1ght]

Originally Posted by Shiv@Openflash

Those are o2 sensor header control circuit codes. Those codes are bot turned off/disabled by the tune. I don't think you should be getting those with the header. if you clear them, do they come back?

yes, i am still getting them after clear.

[pl1ght]

Originally Posted by pl1ght

yes, i am still getting them after clear.

Wow, i HATE to admit this, i forgot to plug them back in to the car, FFS.

Happy new years. Had an epiphany right this moment.

[Shiv@Openflash]

Originally Posted by pl1ght

Wow, i HATE to admit this, i forgot to plug them back in to the car, FFS.

Happy new years. Had an epiphany right this moment.

Happy New Year!