OpenFlash Tablet: OTS v2.0 Beta (132 new maps, 12 new XMLs) Available for Download - Page 57 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

jk86freek · 11-19-2014, 10:18 PM

Hi Shiv

Problem 1. (i want to save my Present original file) I don't know why i tried to connect my oft with openflash manager i keep having this error

http://postimg.org/image/x9bjjl1ej/
Problem 2 ( I connect my oft tried to update ) i got this error???

http://postimg.org/image/y049pd3rv/
is it because with ecu type?? ZA1JD00G??

Wise · 11-19-2014, 11:36 PM

Just bought an Openflash Tablet. Should arrive in the mail soon.

Question.

What would be the best tune to run for the following setup and what sort of results should I expect over stock in terms of HP and TQ gains? I'm not expecting huge gains, my main goal is to eliminate the torque dip.

6Spd. Manual using 98 RON Australian Fuel (Essentially the same as US 93)

MODS
AFE Takeda Intake
Tomei UEL Header
Invidia Q300 Catback

phrosty · 11-20-2014, 01:04 AM

Quote:

Originally Posted by Wise

Just bought an Openflash Tablet. Should arrive in the mail soon.

Question.

What would be the best tune to run for the following setup and what sort of results should I expect over stock in terms of HP and TQ gains? I'm not expecting huge gains, my main goal is to eliminate the torque dip.

6Spd. Manual using 98 RON Australian Fuel (Essentially the same as US 93)

MODS
AFE Takeda Intake
Tomei UEL Header
Invidia Q300 Catback

If your header is catless, stage 2 is what you're after. Might also want to look at steve99's thread on AU petrol which seems like it can be be pretty horrible.

Wise · 11-20-2014, 06:20 PM

Quote:

Originally Posted by phrosty

If your header is catless, stage 2 is what you're after. Might also want to look at steve99's thread on AU petrol which seems like it can be be pretty horrible.

Thanks mate. Will check out.

Wise · 11-20-2014, 06:25 PM

Quote:

Originally Posted by 86socal

Is anyone running the tomei uel with oft?

I will be soon. Installing Tomei UEL header in the next few weeks and my OFT is in the mail.

Turdinator · 11-20-2014, 07:22 PM

Quote:

Originally Posted by Wise

Just bought an Openflash Tablet. Should arrive in the mail soon.

Question.

What would be the best tune to run for the following setup and what sort of results should I expect over stock in terms of HP and TQ gains? I'm not expecting huge gains, my main goal is to eliminate the torque dip.

6Spd. Manual using 98 RON Australian Fuel (Essentially the same as US 93)

MODS
AFE Takeda Intake
Tomei UEL Header
Invidia Q300 Catback

Start with the UEL stage 2 and you may need to scale your MAF and tweak the ignition timing for best results.

EDIT: Or run E85

B-R-Z · 11-20-2014, 08:04 PM

UEL stage 2 91 on 93 gas is a healthier tune at the expense 2-3 top end HP (from what I've been told)

Re~Mix · 11-21-2014, 05:31 PM

Current setup:
FT86SF Catted UEL Header
TRD Cold Air Intake
TRD Catback Exhaust

Running OFT Stg. 2 per local shop and Shiv's recommendation. It looks like some folks are saying the data logs can look a bit odd on Stg. 2 and maybe I need to dial back to Stg. 1.

Any insight on this?

Malt · 11-21-2014, 06:20 PM

Quote:

Originally Posted by Re~Mix

Current setup:
FT86SF Catted UEL Header
TRD Cold Air Intake
TRD Catback Exhaust

Running OFT Stg. 2 per local shop and Shiv's recommendation. It looks like some folks are saying the data logs can look a bit odd on Stg. 2 and maybe I need to dial back to Stg. 1.

Any insight on this?

You should post your data logs so we can look at them to tell if its running safely or not. Anything else is just guessing at this point.

Re~Mix · 11-21-2014, 08:32 PM

Quote:

Originally Posted by Malt

You should post your data logs so we can look at them to tell if its running safely or not. Anything else is just guessing at this point.

Will do, new to this tuning gig.

nunonuna · 11-21-2014, 09:07 PM

Quote:

Originally Posted by Re~Mix

Will do, new to this tuning gig.

This will help you understand what to look for~(Thanks to @steve99)
http://www.ft86club.com/forums/showthread.php?t=69871
Make sure you go to "configure data channel" and choose useful channels before you try logging. Many people including me did logging with channels selected as default for the first time so had to log it again.

kidgogeta · 11-22-2014, 05:05 PM

just installed the OFT for the first time, only mods I've got is the grimmspeed intake and srt headerback running the 93 oct tune. First time i ran it through had a pause around 4000 rpm with significant change in the noise coming from engine, just wondering if its normal?

Target70 · 11-22-2014, 05:33 PM

Quote:

Originally Posted by kidgogeta

just installed the OFT for the first time, only mods I've got is the grimmspeed intake and srt headerback running the 93 oct tune. First time i ran it through had a pause around 4000 rpm with significant change in the noise coming from engine, just wondering if its normal?

I don't think the pause is normal, but the noise at 4000 is normal and caused by the more aggressive valve timing. (from what I have read)

kidgogeta · 11-22-2014, 08:07 PM

Quote:

Originally Posted by Target70

I don't think the pause is normal, but the noise at 4000 is normal and caused by the more aggressive valve timing. (from what I have read)

Thanks kinda agrees with what I''ve been reading, the car only had the pause the first time wot now its just the vvt

11-21-2014, 05:31 PM	#792
Re~Mix Senior Member Join Date: May 2012 Drives: 13' Scion FRS MT Location: San Francisco Bay Area Posts: 737 Thanks: 290 Thanked 333 Times in 191 Posts Mentioned: 7 Post(s) Tagged: 3 Thread(s)	Current setup: FT86SF Catted UEL Header TRD Cold Air Intake TRD Catback Exhaust Running OFT Stg. 2 per local shop and Shiv's recommendation. It looks like some folks are saying the data logs can look a bit odd on Stg. 2 and maybe I need to dial back to Stg. 1. Any insight on this? __________________ 07' Z4M Coupe \| KW Clubsports \| AFE Intake \| Stromung Mufflers \| UUC Shortshifter \| Advan RS 15' 228i MSport 13' FR-S \| TRD CAI \| TRD Catback \| UEL Header \| OFT Stg 1 \| Rota Grid-V \| RCE Suspension \| Hankook \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFlash Tablet v1.42b maps now available	Shiv@Openflash	Software Tuning	159	09-13-2016 01:29 AM
Openflash Tablet v1.31 beta maps (including Stage 2!) now available for download	Shiv@Openflash	Software Tuning	354	02-08-2015 06:23 PM
OpenFlash Tablet: v1.60 OTS Maps (beta)-- USDM testers wanted	Shiv@Openflash	Software Tuning	142	07-22-2014 11:21 PM
Now Available: OpenFlash Tablet Datalogging/Datagraphing (BETA Release)	Shiv@Openflash	Software Tuning	255	02-15-2014 05:43 AM
OpenFlash Tablet Stage 1 v1.2 maps available for download	Shiv@Openflash	Software Tuning	31	10-31-2013 09:45 PM

11-19-2014, 10:18 PM	#785
jk86freek Junior Member Join Date: Apr 2013 Drives: fr-s Location: Taiwan Posts: 8 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hi Shiv Problem 1. (i want to save my Present original file) I don't know why i tried to connect my oft with openflash manager i keep having this error http://postimg.org/image/x9bjjl1ej/ Problem 2 ( I connect my oft tried to update ) i got this error??? http://postimg.org/image/y049pd3rv/ is it because with ecu type?? ZA1JD00G??

11-22-2014, 05:05 PM	#796
kidgogeta Senior Member Join Date: Apr 2012 Drives: FRS Location: Canada Posts: 459 Thanks: 631 Thanked 103 Times in 71 Posts Mentioned: 0 Post(s) Tagged: 1 Thread(s)	just installed the OFT for the first time, only mods I've got is the grimmspeed intake and srt headerback running the 93 oct tune. First time i ran it through had a pause around 4000 rpm with significant change in the noise coming from engine, just wondering if its normal?

User Name		Remember Me?
Password