Vortech Install question... where does this hex bolt go??? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

sissupr · 06-20-2014, 09:13 AM

Hi Guys,

I'm ready to start the Vortech install after reviewing the parts list and manual.

There's a hex bolt M12x1.75x40mm that I received in the supercharger mounting hardware kit from Vortech that I have no clue where it goes

I searched through the online manual, reviewed all the pictures, and can't seem to find out where it goes. I purchased the supercharger mounting hardware kit from Vortech to have all NEW bolts (kit was used). Here's a pic of the bolt.

Any ideas, I don't want to have any extra bolts laying around when I'm all done

Raven604 · 06-20-2014, 09:27 AM

\_(O.o)_/

Sent from my SGH-I337M using Tapatalk

DJCarbine · 06-20-2014, 09:41 AM

While that bolt is in the manual for included parts, I don't remember ever using a hex bolt in the install

sissupr · 06-20-2014, 09:50 AM

Quote:

Originally Posted by DJCarbine

While that bolt is in the manual for included parts, I don't remember ever using a hex bolt in the install

thanks... I PMed Brian and will call Vortech this morning. No clue where it goes.

Now, time for the install... probably do it in stages and take my time. Pretty crappy all weekend in Chicago anyway

marcoaferrer · 06-20-2014, 12:24 PM

Hope this helps

Its used to assemble the AC compressor bracket.

sissupr · 06-20-2014, 12:26 PM

Awesome thanks.

Sent from my SCH-I605 using Tapatalk

marcoaferrer · 06-20-2014, 12:27 PM

If you need any help with figuring out what does where and what bolt to use let me know I might be able to help you out.

I installed a used kit not too long ago with 95% of the bolts missing lol.

sissupr · 06-20-2014, 01:13 PM

Thanks. Will do. Its been kind of pain sourcing and making sure you have all the parts you should have... but thats the beauty of saving some cash for other things

thanks again...

Sent from my SCH-I605 using Tapatalk

DJCarbine · 06-20-2014, 05:20 PM

Quote:

Originally Posted by marcoaferrer

Hope this helps

Its used to assemble the AC compressor bracket.

I need to check my car... I'm almost certain mine was a single piece or already assembled.

Of note though, you may have extra stuff. I ended up with extra hoseclamps, an extra coupler, and some extra fasteners/misc hardware.

I was fairly meticulous so I am pretty sure I didn't leave anything out.

marcoaferrer · 06-20-2014, 05:25 PM

Quote:

Originally Posted by DJCarbine

I need to check my car... I'm almost certain mine was a single piece or already assembled.

Of note though, you may have extra stuff. I ended up with extra hoseclamps, an extra coupler, and some extra fasteners/misc hardware.

I was fairly meticulous so I am pretty sure I didn't leave anything out.

The extra hoseclamps, coupler and hardware is right. I think this is the norm with all the kits. As far as this piece you might have had it already assembled but there is a step in the instructions telling you how to put it together and dezoris bitched about the lack of detail for that step during his video lol

06-20-2014, 09:13 AM	#1
sissupr Senior Member Join Date: Mar 2014 Drives: 2014 BRZ Premium - SWP Location: Chicago Posts: 159 Thanks: 0 Thanked 21 Times in 20 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Vortech Install question... where does this hex bolt go??? Hi Guys, I'm ready to start the Vortech install after reviewing the parts list and manual. There's a hex bolt M12x1.75x40mm that I received in the supercharger mounting hardware kit from Vortech that I have no clue where it goes I searched through the online manual, reviewed all the pictures, and can't seem to find out where it goes. I purchased the supercharger mounting hardware kit from Vortech to have all NEW bolts (kit was used). Here's a pic of the bolt. Any ideas, I don't want to have any extra bolts laying around when I'm all done Attached Images

06-20-2014, 09:41 AM	#3
DJCarbine Thupercharged Join Date: Mar 2013 Drives: 2013 FR-S Location: La Grange Park, IL. Posts: 1,501 Thanks: 116 Thanked 751 Times in 439 Posts Mentioned: 23 Post(s) Tagged: 0 Thread(s)	While that bolt is in the manual for included parts, I don't remember ever using a hex bolt in the install __________________ 2013 FRS Vortech V3 11psi Revworks UEL - PLM Overpipe - MOTIV catted frontpipe - Invidia Q300 2019 Series.Grey STI - Stage1+ SF

06-20-2014, 12:26 PM	#6
sissupr Senior Member Join Date: Mar 2014 Drives: 2014 BRZ Premium - SWP Location: Chicago Posts: 159 Thanks: 0 Thanked 21 Times in 20 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Awesome thanks. Sent from my SCH-I605 using Tapatalk __________________ Vortech SC V3 // 3.12 Pulley // Moto-East Tune (93oct,e40-50,e85)

06-20-2014, 01:13 PM	#8
sissupr Senior Member Join Date: Mar 2014 Drives: 2014 BRZ Premium - SWP Location: Chicago Posts: 159 Thanks: 0 Thanked 21 Times in 20 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Thanks. Will do. Its been kind of pain sourcing and making sure you have all the parts you should have... but thats the beauty of saving some cash for other things thanks again... Sent from my SCH-I605 using Tapatalk __________________ Vortech SC V3 // 3.12 Pulley // Moto-East Tune (93oct,e40-50,e85)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Will OEM camber bolt install affect alignment	B-R-Z	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	9	05-23-2014 11:30 PM
Alignment needed after front camber bolt install?	ayau	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	60	08-31-2013 12:13 AM
Whiteline Camber bolt install	TimR	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	3	06-06-2013 08:33 AM
vortech install?	ft86me	Southern California	6	03-31-2013 03:50 PM
Crash bolt question	ayau	Tracking / Autocross / HPDE / Drifting	8	08-17-2012 01:22 PM

06-20-2014, 09:27 AM	#2
Raven604 Senior Member Join Date: Dec 2012 Drives: 2013 Scion FR-S Location: Vancouver Posts: 328 Thanks: 93 Thanked 113 Times in 65 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	\_(O.o)_/ Sent from my SGH-I337M using Tapatalk

06-20-2014, 12:24 PM	#5
marcoaferrer Senior Member Join Date: Jan 2014 Drives: Whiteout FR-S Location: Miami Posts: 251 Thanks: 97 Thanked 200 Times in 111 Posts Mentioned: 33 Post(s) Tagged: 0 Thread(s)	Hope this helps Its used to assemble the AC compressor bracket.

06-20-2014, 12:27 PM	#7
marcoaferrer Senior Member Join Date: Jan 2014 Drives: Whiteout FR-S Location: Miami Posts: 251 Thanks: 97 Thanked 200 Times in 111 Posts Mentioned: 33 Post(s) Tagged: 0 Thread(s)	If you need any help with figuring out what does where and what bolt to use let me know I might be able to help you out. I installed a used kit not too long ago with 95% of the bolts missing lol.

User Name		Remember Me?
Password