|
Software Tuning Discuss all software tuning topics. |
|
Thread Tools | Search this Thread |
02-17-2014, 09:12 PM | #1 |
Join Date: Nov 2012
Drives: JDL Turbo FRS, 335SC BRZ (ret)
Location: Lehigh Valley, PA
Posts: 932
Thanks: 368
Thanked 1,548 Times in 525 Posts
Mentioned: 380 Post(s)
Tagged: 6 Thread(s)
|
Moto-East Flex Fuel kit is official and released!
We'll let the pictures do the talking, but here's what is included for $650
Zeitronix ECA with gauge and sensor Ethanol compatible hose Name brand AN anodized fittings throughout--no clamps, no plastic Push on fittings and 100% reversible with no cutting Minimalist routing. Look at the picture of the kit mounted. You won't find unsightly looping lengths of hose here Simple sensor mounting. Ties right to the lines and is as solid as can be Wire harness for ECU There are four wires to hook up: Ground, IGN-ON power, sensor IN and ECU output. All crimps/connectors included and terminated where possible. You can also choose to use the rear o2 instead of the ECU harness. For this you can save 100 and that makes this the most affordable complete flex fuel kit out there! Mapping is as follows: Moto-East customer: FREE If you have hardware/license from another EcuTek tuner: 200 for NA, 250 for SC or stock boost AVO/Greddy, 350 for high boost anything or custom turbo. If you need a kit then it is 799/849/949 including license & hardware. It is now live and available here for pre-order: http://www.moto-east.com/store/moto-...fuel-ft86.html Initially we did not want to go the pre-order route, but getting enough fittings has taken a bit longer than expected so we are setting a ship date by 3/1, so end of next week the first batch will be out the door (hopefully earlier) EDIT 3/1: Instructions are live here: https://www.moto-east.com/support/kb/faq.php?cid=1 Last edited by Xero-Limit; 03-05-2014 at 09:52 PM. |
The Following 9 Users Say Thank You to Xero-Limit For This Useful Post: | @Art_Mighty (05-18-2016), Allch Chcar (03-01-2014), ATL BRZ (02-18-2014), brybot (12-22-2016), Chewie4299 (02-18-2014), CSG Mike (05-30-2014), enjoyminutemaid (02-17-2014), RedAlert (04-23-2014), SirBrass (02-17-2014), Sportsguy83 (02-18-2014) |
02-17-2014, 09:45 PM | #2 |
Banned
Join Date: Mar 2013
Drives: 2013 FR-S
Location: Orlando, FL
Posts: 2,929
Thanks: 1,166
Thanked 2,293 Times in 1,180 Posts
Mentioned: 313 Post(s)
Tagged: 4 Thread(s)
|
Looks awesome! Can you do a package with just the lines and fittings for those of us who already have the sensor/ECA or have the old flexfire setup?
|
The Following User Says Thank You to jamesm For This Useful Post: | Sportsguy83 (02-18-2014) |
02-17-2014, 09:48 PM | #3 |
Captain Cocoa
Join Date: Jul 2012
Drives: CBS BRZ MT
Location: MD
Posts: 597
Thanks: 32
Thanked 282 Times in 161 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Looking forward to going flex fuel come summer time!
|
The Following User Says Thank You to SubaSteve For This Useful Post: | byun (04-28-2016) |
02-17-2014, 10:04 PM | #4 |
Senior Member
Join Date: Mar 2013
Drives: R32 GTR, AW11 MR2 SC, GTS86 R
Location: OZ
Posts: 2,615
Thanks: 603
Thanked 1,223 Times in 708 Posts
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
|
Good bit of kit, a few questions if I may:
Why ECA instead of ECA2? Why not use all black anodised fittings? Why use zip tie to mount the sensor? Why is there no protection between the paint on the strut tower edge to the non- black anodised fitting? |
02-17-2014, 10:17 PM | #5 | ||
Join Date: Nov 2012
Drives: JDL Turbo FRS, 335SC BRZ (ret)
Location: Lehigh Valley, PA
Posts: 932
Thanks: 368
Thanked 1,548 Times in 525 Posts
Mentioned: 380 Post(s)
Tagged: 6 Thread(s)
|
Quote:
Quote:
2. Why use all black? We can make them in all black, blue/red also. We like the silver/black combo. It is fully anodized, just silver/black instead of all black. 3. More secure than double sided tape, does not require tapping sheet metal, and keeps it off of the plastic fender liner. 4. Because it is not needed, there's a gap there. |
||
The Following User Says Thank You to Xero-Limit For This Useful Post: | s2d4 (02-18-2014) |
02-17-2014, 10:46 PM | #6 |
Senior Member
Join Date: Mar 2013
Drives: Scion FR-S
Location: United States
Posts: 743
Thanks: 46
Thanked 397 Times in 211 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
how do i get that intake?
__________________
My build thread, slowly but surely http://www.ft86club.com/forums/showthread.php?t=40509
|
02-17-2014, 11:06 PM | #7 |
Join Date: Mar 2013
Drives: 2013 ScionRacing FRS w/2AZ-FE swap
Location: Lansdale PA
Posts: 157
Thanks: 77
Thanked 65 Times in 42 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Looks great Mike!
|
The Following User Says Thank You to R/T Tuning For This Useful Post: | Xero-Limit (02-18-2014) |
02-17-2014, 11:42 PM | #8 |
Driving Coach
Join Date: Jun 2012
Drives: BRZ
Location: Atlanta
Posts: 3,666
Thanks: 3,723
Thanked 4,137 Times in 1,707 Posts
Mentioned: 90 Post(s)
Tagged: 6 Thread(s)
|
Pre ordered this kit already! Thanks for the detailed pics.
|
02-18-2014, 03:11 AM | #9 |
Automotive Connoisseur
Join Date: Jan 2013
Drives: too many cars
Location: The Desert, AZ
Posts: 629
Thanks: 156
Thanked 517 Times in 257 Posts
Mentioned: 66 Post(s)
Tagged: 0 Thread(s)
|
ordered
__________________
LSx Powered 86/ASE Master Certified Automotive Technician
|
The Following User Says Thank You to AZFA20 For This Useful Post: | Xero-Limit (02-18-2014) |
02-18-2014, 09:31 AM | #10 |
Senior Member
Join Date: Jul 2012
Drives: 2013 SWP BRZ
Location: New York
Posts: 2,240
Thanks: 458
Thanked 878 Times in 556 Posts
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
|
Hey you took my mounting spot!!! LOL
Little tip Mike, instead of using the zip ties, get some line clamps with the rubber on the inside and use some stainless bolts. |
The Following User Says Thank You to xxscaxx For This Useful Post: | xDanger_208x (12-12-2014) |
02-18-2014, 10:34 AM | #11 |
I Love custom Turbo kits
Join Date: Mar 2012
Drives: Limited BRZ
Location: Miami
Posts: 10,770
Thanks: 20,004
Thanked 8,346 Times in 4,361 Posts
Mentioned: 441 Post(s)
Tagged: 12 Thread(s)
|
Looks really good @moto-mike great job!!
__________________
|
The Following User Says Thank You to Sportsguy83 For This Useful Post: | Xero-Limit (02-19-2014) |
02-19-2014, 08:35 AM | #12 |
Join Date: Nov 2012
Drives: JDL Turbo FRS, 335SC BRZ (ret)
Location: Lehigh Valley, PA
Posts: 932
Thanks: 368
Thanked 1,548 Times in 525 Posts
Mentioned: 380 Post(s)
Tagged: 6 Thread(s)
|
Just about done with the final testing and ran it through two gas tanks fine tuning the final version. We really want to make sure we get this spot on, and it looks like it is going very well. We got the rest of the components for the first batch of kits yesterday and starting assembly tomorrow.
VERY IMPORTANT for current flex fuel users and upcoming folks (even if you have someone else's kit). As the FT86 has both DI and PI, you have two different places you can put the kit in. We chose the port injection line, some choose the DI line. But regardless of which one, under most situations the car is in Direct Injection, and rarely port injection. We've gone as much as 50 miles and still not detected the new fuel on the port line! So if you have a kit that uses the DI as the sensor line, when you go to WOT past 5000 RPM you're getting the old fuel that sits in the rail for as many as 5 full WOT pulls. So if you filled up with e85, sensor indicates e85, and ECU thinks it is e85--in reality you are getting significant doses of pump gas sprayed regardless through the PI. Our solution to this is as follows: With our flex fuel tune you can select the VSC button to sport, and that will trigger a "learning mode" where both PI and DI will fire at low loads/rpms. Once you see the ECA stop moving you know that the fuel has pretty much fully circulated. Then you are good to go. We are also going to probably implement this so the first 120 seconds of the car being on it does this too. But we're waiting on EcuTek to fix a bug we found. Should be done shortly. Then you only would trigger the mode if you're not restarting the car or if it needs more time. For ProECU RaceROM individual tuners we will supply this mapping for you so you can use our kit with your mapping. If you have our tune with either our flex fuel kit or another, we'll add this map in for you as well. Otherwise having a blast with the setup on the car, testing is the best part of this! With the clutch slipping at full on e85, we are able to run e40 or so and get the good knock resistance on the twin screw while keeping overall power levels sane. |
The Following 16 Users Say Thank You to Xero-Limit For This Useful Post: | ATL BRZ (02-19-2014), AZFA20 (02-19-2014), brybot (12-22-2016), driftking96 (05-18-2016), enjoyminutemaid (02-19-2014), Fred E (02-19-2014), GT86_PRAGUE (10-01-2015), HaloFRS (02-04-2016), industrial (02-19-2014), Ironsquid (02-19-2014), jamesm (02-19-2014), mikalem (03-02-2014), RedAlert (04-23-2014), s2d4 (02-19-2014), Sportsguy83 (02-19-2014), u/Josh (02-19-2014) |
02-19-2014, 08:48 AM | #13 |
I Love custom Turbo kits
Join Date: Mar 2012
Drives: Limited BRZ
Location: Miami
Posts: 10,770
Thanks: 20,004
Thanked 8,346 Times in 4,361 Posts
Mentioned: 441 Post(s)
Tagged: 12 Thread(s)
|
^ More interesting stuff.
__________________
|
02-19-2014, 11:00 AM | #14 |
Banned
Join Date: Mar 2013
Drives: 2013 FR-S
Location: Orlando, FL
Posts: 2,929
Thanks: 1,166
Thanked 2,293 Times in 1,180 Posts
Mentioned: 313 Post(s)
Tagged: 4 Thread(s)
|
can't wait to get these lines and complete my flexfuel setup . powwwaaaaa lol.
|
The Following User Says Thank You to jamesm For This Useful Post: | Sportsguy83 (02-19-2014) |
|
|
Tags |
e85, ethanol, flex fuel |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Moto-East (Moto Mike) Review Thread | ecko04 | User/Vendor/Sponsor Reviews, Feedback, Comments | 4 | 05-22-2014 06:57 PM |
GReddy Turbo Kit Now Available at Moto-East! | Xero-Limit | Forced Induction | 1 | 12-27-2013 01:20 PM |
Moto-East E85 Testing | Xero-Limit | Engine, Exhaust, Transmission | 11 | 07-23-2013 03:55 PM |
ECUtek Flex Fuel REVOLUTION: World's First Flex Fuel Factory ECU GTR - BRZ soon! | Visconti | Engine, Exhaust, Transmission | 356 | 05-20-2013 09:36 AM |
Moto-East tune -wow | Evil86 | Engine, Exhaust, Transmission | 2 | 03-13-2013 01:02 PM |