Midnight23 Greddy Turbo Kit 270whp ***Evasive Tuned*** - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Evasive Motorsports · 01-04-2014, 02:11 AM

Finished our good friend and customer Jonathan aka @midnight23 clean BRZ. Just wanted to share this build for you guys to enjoy. The car made 270whp / 201tq on our Mustang dyno which is very impressive with a bolt on kit . The car is one of the higher numbers we hit on pump 91.

Mods
Greddy Bolt On Turbo
Greddy Evo 3
Greddy Multi D/A Boost Gauge
Evasive Fuel System
Action Clutch
4 Bar Map Sensor
Perrin over pipe
Berk Front pipe

91 Pump Gas
270WHP (MUSTANG DYNO)
201TQ

sw20kosh · 01-04-2014, 02:46 AM

Nice flat tq curve! Is the boost creeping up a lil towards redline? So after tuning this car do you think all greddy kits should put out this same power on this engine?

Evasive Motorsports · 01-04-2014, 02:55 AM

Quote:

Originally Posted by sw20kosh

Nice flat tq curve! Is the boost creeping up a lil towards redline? So after tuning this car do you think all greddy kits should put out this same power on this engine?

Well the boost creeping is the cause from the air flow from the exhaust side. The kit is rated with 7psi of boost but with the better air flow its causing the boost pressure to go up a few psi. We hit the same number on 100 octane a few weeks ago. But most of them we are tuning is around 260-270whp.

midnight23 · 01-04-2014, 02:15 PM

For anyone questioning going with this kit or FI in general it is worth every penny!

evo4g63 · 01-04-2014, 02:42 PM

@EvasiveMotorsports what does your fuel system consist of? Also I dont see an oil cooler, any reason for not running one with this kit?

sw20kosh · 01-04-2014, 02:46 PM

Quote:

Originally Posted by Evasive Motorsports

Well the boost creeping is the cause from the air flow from the exhaust side. The kit is rated with 7psi of boost but with the better air flow its causing the boost pressure to go up a few psi. We hit the same number on 100 octane a few weeks ago. But most of them we are tuning is around 260-270whp.

What is your strategy for keeping the torque flat all the way to redline. Most plots I see besides centrifugal a show it start to drop at 6700-7000 rpm

JerryMichaels7 · 01-04-2014, 02:48 PM

No video or sound!! This is demanded!! Love the car.

midnight23 · 01-04-2014, 05:50 PM

Quote:

Originally Posted by JerryMichaels7

No video or sound!! This is demanded!! Love the car.

[ame="http://youtu.be/m4Hn9hHISN4"]http://youtu.be/m4Hn9hHISN4[/ame]

Will try to get gopro videos later this week, for now you can have iphone quality :p

midnight23 · 01-04-2014, 05:52 PM

Quote:

Originally Posted by evo4g63

@EvasiveMotorsports what does your fuel system consist of? Also I dont see an oil cooler, any reason for not running one with this kit?

Will be adding one before it heats up again in SoCal, waiting to see if anything new and improved comes out for 2014.

sw20kosh · 01-06-2014, 07:53 PM

Quote:

Originally Posted by evo4g63

@EvasiveMotorsports what does your fuel system consist of?

^ This
@Evasive Motorsports

midnight23 · 01-10-2014, 06:39 AM

Quote:

Originally Posted by sw20kosh

^ This
@Evasive Motorsports

700cc + fuel pump

Pablitomarrero · 01-10-2014, 02:58 PM

@midnight23 how much psi are you running, how big are the exhaust mods? My GReddy kit gave out 225 whp on mustang dyno on 91 gas and 7 psi (stock injectors/ fuel pump). I currently have Perrin overpipe, perrin frontpipe and ark exhaust, all 2.5" diameter. I want those numbers!!!

sw20kosh · 01-10-2014, 03:02 PM

Quote:

Originally Posted by Pablitomarrero

@midnight23 how much psi are you running, how big are the exhaust mods? My GReddy kit gave out 225 whp on mustang dyno on 91 gas and 7 psi (stock injectors/ fuel pump). I currently have Perrin overpipe, perrin frontpipe and ark exhaust, all 2.5" diameter. I want those numbers!!!

Evassive said:

Quote:

Well the boost creeping is the cause from the air flow from the exhaust side. The kit is rated with 7psi of boost but with the better air flow its causing the boost pressure to go up a few psi. We hit the same number on 100 octane a few weeks ago. But most of them we are tuning is around 260-270whp.

so 7 psi creeping up to 9-10 psi. I wonder if this is why the torque curve looks so flat up top.

Robftss · 01-10-2014, 03:08 PM

Quote:

Originally Posted by midnight23

For anyone questioning going with this kit or FI in general it is worth every penny!

How many pennies ? - from start to finish ?

01-04-2014, 02:15 PM	#4
midnight23 dying bird under the hood Join Date: Mar 2013 Drives: 2013 SWP Limited BRZ Location: Disneyland, California Posts: 1,331 Thanks: 546 Thanked 451 Times in 295 Posts Mentioned: 34 Post(s) Tagged: 0 Thread(s)	For anyone questioning going with this kit or FI in general it is worth every penny! __________________ GReddy Turbo BRZ tuned by Evasive Motorsports Build Thread Instagram

01-04-2014, 02:42 PM	#5
evo4g63 Senior Member Join Date: Jan 2013 Drives: 2016 Subaru WRX Location: Phoenix, AZ Posts: 979 Thanks: 235 Thanked 329 Times in 231 Posts Mentioned: 33 Post(s) Tagged: 0 Thread(s)	@EvasiveMotorsports what does your fuel system consist of? Also I dont see an oil cooler, any reason for not running one with this kit? __________________ -2016 Subaru WRX -2013 Scion FR-S: Wastegated Vortech V3'd, E85 SOLD

01-04-2014, 02:48 PM	#7
JerryMichaels7 Senior Member Join Date: Mar 2013 Drives: Whiteout FRS Location: South, Ga Posts: 348 Thanks: 19 Thanked 144 Times in 80 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	No video or sound!! This is demanded!! Love the car. __________________ life's greatest stories usually start with the words, "fuck it!".

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ImperiousRex Time Attack BRZ Evasive Tuned 271whp Greddy Turbo	Evasive Motorsports	BRZ Photos, Videos, Wallpapers, Gallery Forum	18	07-24-2014 08:38 PM
ImperiousRex Time Attack BRZ Evasive Tuned 271whp Greddy Turbo	Evasive Motorsports	Forced Induction	21	02-07-2014 12:12 PM
Bon Sleeper BRZ AVO TURBO Evasive Tuned	Evasive Motorsports	BRZ Photos, Videos, Wallpapers, Gallery Forum	37	12-27-2013 03:29 AM
Greddy Turbo kit tuned by R/T Tuning (320hp)	R/T Tuning	Forced Induction	37	12-14-2013 05:16 PM
Bon Sleeper BRZ AVO TURBO GRAPH Evasive Tuned	Evasive Motorsports	Forced Induction	42	09-26-2013 10:26 PM

01-04-2014, 02:46 AM	#2
sw20kosh Senior Member Join Date: Jul 2012 Drives: 2013 Black FR-S Location: SF Posts: 3,030 Thanks: 881 Thanked 2,014 Times in 990 Posts Mentioned: 153 Post(s) Tagged: 1 Thread(s)	Nice flat tq curve! Is the boost creeping up a lil towards redline? So after tuning this car do you think all greddy kits should put out this same power on this engine?

01-10-2014, 02:58 PM	#12
Pablitomarrero Senior Member Join Date: Mar 2013 Drives: FR-S 10 series Location: Guaynabo, Puerto Rico Posts: 736 Thanks: 370 Thanked 384 Times in 240 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	@midnight23 how much psi are you running, how big are the exhaust mods? My GReddy kit gave out 225 whp on mustang dyno on 91 gas and 7 psi (stock injectors/ fuel pump). I currently have Perrin overpipe, perrin frontpipe and ark exhaust, all 2.5" diameter. I want those numbers!!!

User Name		Remember Me?
Password