Midnight23 Greddy Turbo Kit 270whp ***Evasive Tuned***
 

Finished our good friend and customer Jonathan aka @midnight23 clean BRZ. Just wanted to share this build for you guys to enjoy. The car made 270whp / 201tq on our Mustang dyno which is very impressive with a bolt on kit . The car is one of the higher numbers we hit on pump 91. :thumbup:

Mods
Greddy Bolt On Turbo
Greddy Evo 3
Greddy Multi D/A Boost Gauge
Evasive Fuel System
Action Clutch
4 Bar Map Sensor
Perrin over pipe
Berk Front pipe

91 Pump Gas
270WHP (MUSTANG DYNO)
201TQ
http://img.photobucket.com/albums/v6...psf5df4ba8.jpg

http://img.photobucket.com/albums/v6...ps2aefef73.jpg

http://img.photobucket.com/albums/v6...ps7c8f5d70.jpg

http://img.photobucket.com/albums/v6...psfe5e6311.jpg

http://img.photobucket.com/albums/v6...ps65e6ff48.jpg

http://img.photobucket.com/albums/v6...psde50dd8c.jpg

Nice flat tq curve! Is the boost creeping up a lil towards redline? So after tuning this car do you think all greddy kits should put out this same power on this engine?

Well the boost creeping is the cause from the air flow from the exhaust side. The kit is rated with 7psi of boost but with the better air flow its causing the boost pressure to go up a few psi. We hit the same number on 100 octane a few weeks ago. But most of them we are tuning is around 260-270whp.:thumbup:

For anyone questioning going with this kit or FI in general it is worth every penny!

@EvasiveMotorsports what does your fuel system consist of? Also I dont see an oil cooler, any reason for not running one with this kit?

What is your strategy for keeping the torque flat all the way to redline. Most plots I see besides centrifugal a show it start to drop at 6700-7000 rpm

No video or sound!! This is demanded!! Love the car.

[ame="http://youtu.be/m4Hn9hHISN4"]http://youtu.be/m4Hn9hHISN4[/ame]

Will try to get gopro videos later this week, for now you can have iphone quality :p

Will be adding one before it heats up again in SoCal, waiting to see if anything new and improved comes out for 2014.

^ This
@Evasive Motorsports

700cc + fuel pump

@midnight23 how much psi are you running, how big are the exhaust mods? My GReddy kit gave out 225 whp on mustang dyno on 91 gas and 7 psi (stock injectors/ fuel pump). I currently have Perrin overpipe, perrin frontpipe and ark exhaust, all 2.5" diameter. I want those numbers!!!

Evassive said:

so 7 psi creeping up to 9-10 psi. I wonder if this is why the torque curve looks so flat up top.

How many pennies ? - from start to finish ?