Girodisc 2 piece brake rotors - GAUGING INTEREST - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

No Limit Motorsport · 03-15-2013, 05:18 PM

I have been in talks with Girodisc about having some front and rear two piece rotors made for our cars. To get it done we would have to have at least 10 sets made.

Info about Girodisc

The rotors would ideally save somewhere between 2-4lbs each. More savings for the front rotor than the back. Retail price for the fronts would be around $650-$750 range per pair, rears $700-$600 range per pair.

Now here is where some of the fun comes in... we can have them anodized our choice of colors which are red, dark blue, light blue, green, orange, aqua (Project Mu green), pink, silver (clear). grey, dark gray, bronze, gold, black.

We also get our choice of rotor patterns which would be blank, slotted, segmented slot, crossdrilled, crossdrilled/slotted, J-Hook.

Here are some examples of previous products

Shankenstein · 03-15-2013, 06:10 PM

They seem really good quality, but what caliper would it go with?

Looks like Wilwood's offering with bolt-through hats instead of screw-into hats. Those can be had for ~$550/pair. Seems like a fair price for slightly better tech, a choice of colors, and the development cost.

Thanks NLM for hand-delivering a supplier to the forums.

No Limit Motorsport · 03-15-2013, 06:41 PM

Quote:

Originally Posted by Shankenstein

They seem really good quality, but what caliper would it go with?

Looks like Wilwood's offering with bolt-through hats instead of screw-into hats. Those can be had for ~$550/pair. Seems like a fair price for slightly better tech, a choice of colors, and the development cost.

Thanks NLM for hand-delivering a supplier to the forums.

They are excellent quality. We have an STI and Evo X that run these rotors in all of the NARRA TT events with great success. We have not warped a set yet.

These would be made for stock caliper. If we want to use the STI brembo's that application is already available as an off the shelf item (04 STI front, 08+ STI rear).

xkalelx · 01-12-2015, 12:36 AM

Bump. I want these. Why aren't these a thing yet?

Fizz · 01-12-2015, 04:40 AM

I use these up front with my brembo conversion, and the 326mm 2-piece rotors actually weighs slightly lesser than the stock front rotors. Good stuff!!! But it makes a massive hole in your pocket

*KID* · 01-15-2015, 12:37 AM

Is it the same price for the sti version?

03-15-2013, 05:18 PM	#1
No Limit Motorsport Senior Member Join Date: Jul 2012 Drives: 2013 DGM BRZ Location: Long Island, NY Posts: 2,266 Thanks: 355 Thanked 406 Times in 228 Posts Mentioned: 27 Post(s) Tagged: 0 Thread(s)	Girodisc 2 piece brake rotors - GAUGING INTEREST I have been in talks with Girodisc about having some front and rear two piece rotors made for our cars. To get it done we would have to have at least 10 sets made. Info about Girodisc The rotors would ideally save somewhere between 2-4lbs each. More savings for the front rotor than the back. Retail price for the fronts would be around $650-$750 range per pair, rears $700-$600 range per pair. Now here is where some of the fun comes in... we can have them anodized our choice of colors which are red, dark blue, light blue, green, orange, aqua (Project Mu green), pink, silver (clear). grey, dark gray, bronze, gold, black. We also get our choice of rotor patterns which would be blank, slotted, segmented slot, crossdrilled, crossdrilled/slotted, J-Hook. Here are some examples of previous products

03-15-2013, 06:10 PM	#2
Shankenstein Frosty Carrot Join Date: Jan 2013 Drives: The Atomic Carrot Location: Baltimore, MD Posts: 513 Thanks: 272 Thanked 431 Times in 199 Posts Mentioned: 19 Post(s) Tagged: 0 Thread(s)	They seem really good quality, but what caliper would it go with? Looks like Wilwood's offering with bolt-through hats instead of screw-into hats. Those can be had for ~$550/pair. Seems like a fair price for slightly better tech, a choice of colors, and the development cost. Thanks NLM for hand-delivering a supplier to the forums. __________________ If you think you're nerd enough, join in the discussions about Suspension and Aerodynamic modelling! Wall of Fame - JDL Auto Design, Raceseng, Vishnu Tuning, Penske Shocks, Nameless, Perrin, RaceComp Engineering, Essex/AP Racing, Verus, RacerX Wall of Shame - aFe Takeda, Wilwood, FA20Club

01-15-2015, 12:37 AM	#6
KID 86-er Join Date: May 2012 Drives: BRZ tS Location: Laredo, TX Posts: 970 Thanks: 195 Thanked 253 Times in 175 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Is it the same price for the sti version? __________________ 2018 Subaru BRZ ts 020/500 - My Daily, work car, and track car

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gauging interest on a new intake design	Craig	Engine, Exhaust, Transmission	20	03-15-2013 01:51 AM
GAUGING INTEREST: NANOPOLISH AND CLEANER	Asphalt~86	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	0	02-07-2013 05:45 PM
Redline360: Brake Lines, Brake Rotors, Brake Pads for BRZ/FRS	Redline360	Brakes, Suspension, Chassis	12	01-05-2013 11:20 PM
Gauging Interest in New Muffler Delete	JDMenrique	Engine, Exhaust, Transmission	37	11-30-2012 10:40 AM
Gauging Interest in underhood dress up.	BeyondFactoryPerformance	Cosmetic Modification (Interior/Exterior/Lighting)	11	07-04-2012 04:06 AM

01-12-2015, 12:36 AM	#4
xkalelx Senior Member Join Date: Feb 2014 Drives: 2013 BRZ black Location: Cincinnati, OH Posts: 394 Thanks: 265 Thanked 284 Times in 113 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Bump. I want these. Why aren't these a thing yet?

01-12-2015, 04:40 AM	#5
Fizz Senior Addict Join Date: Jan 2013 Drives: 86 GT Location: Perth, Australia Posts: 1,217 Thanks: 249 Thanked 336 Times in 215 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	I use these up front with my brembo conversion, and the 326mm 2-piece rotors actually weighs slightly lesser than the stock front rotors. Good stuff!!! But it makes a massive hole in your pocket

User Name		Remember Me?
Password