BRZ headlight upgrade, paint, demon eyes (PICTURE HEAVY)

[Murseman27]

Originally Posted by Lee358

What did you use to strip it?


Sent from my iPhone using Tapatalk

Well i was broke at the time so i used sand paper and did it all by hand...TOOK FOREVER but it was needed the guy that had owned it before me had slid it a bit in a wreck. the pic is what it looked like 4 months ago now it has red handlebar tape

[milko002]

Originally Posted by Murseman27

Well i was broke at the time so i used sand paper and did it all by hand...TOOK FOREVER but it was needed the guy that had owned it before me had slid it a bit in a wreck. the pic is what it looked like 4 months ago now it has red handlebar tape

People do some crazy sh** when their broke and have too much time on their hands. Like me now responding to this post. The bolts and sprocket were paint red ! WTF !!!! Thats awesome!!! Look at that seat. Your butt must have be sore for months. Hell after riding that I would have killed for a car too. ANY CAR.. All you have to do now is add a flux capacitor petal fast enough and you'll go back to the future.

God bless. Now I want to see a pic of the bike with the red handlebar mod !

[milko002]

Originally Posted by Lee358

What did you use to strip it?


Sent from my iPhone using Tapatalk

He used a old product called crazy and a big fat joint.

[Murseman27]

Originally Posted by milko002

People do some crazy sh** when their broke and have too much time on their hands. Like me now responding to this post. The bolts and sprocket were paint red ! WTF !!!! Thats awesome!!! Look at that seat. Your butt must have be sore for months. Hell after riding that I would have killed for a car too. ANY CAR.. All you have to do now is add a flux capacitor petal fast enough and you'll go back to the future.

God bless. Now I want to see a pic of the bike with the red handlebar mod !

haha i will have to pull it out for the year and take a pic. that seat is actually a "extra padded" seat...still not the best thing in the world but i am looking at a black and red carbon fiber seat but it still hurts to spend 90$ on a bike seat

[milko002]

Originally Posted by Murseman27

haha i will have to pull it out for the year and take a pic. that seat is actually a "extra padded" seat...still not the best thing in the world but i am looking at a black and red carbon fiber seat but it still hurts to spend 90$ on a bike seat

I'm just playing around . Like I said God Bless . The poster seams like a good person . May his FRS / BRZ be one of the best .

[Lee358]

So i got back from colorado tonight and decided to reset my lenses in the holders and they are now set properly. (no extra lip on either side)



i then started the trial and error process of tuning the projector by putting washers between the cutoff shield and the lens i used a #6 washer from home depot cost like $1.50 for 30 washers.



i also mocked up where im going to be epoxying the led holder into the housing.



Tomorrow i will be buying a soda blaster from harbor freight to get rid of some paint that didnt come out too great. Then i will re-paint the part i was unhappy with. I am also going to epoxy the led holder.

Tomorrow night i will also test the output of the projectors with the clear lenses and the washers.

if all turns out well i should have everything sealed up this weekend and the car back together!

[civicdrivr]

Nice. I haven't forgotten about the pics of the STI-Rs mounted. Works been kicking my ass this month.

Sent from my Nexus 4

[Lee358]

Originally Posted by civicdrivr

Nice. I haven't forgotten about the pics of the STI-Rs mounted. Works been kicking my ass this month.

Sent from my Nexus 4

Its all good if my washers dont give me the output i want tomorrow night im going to try the sti-r lens i have!


Sent from my iPhone using Tapatalk

[Lee358]

Drivers side cut off



Pass side cut off



together



What do you guys think? im not quite sure why the passenger side is so off i think its just not sitting on the car properly.

[tbwoodlee]

Originally Posted by Lonewolf

Nice, I thought that you were like f--- this bathroom, the car is more important!

Lol me too, I was like this guy is a f'ing boss!

Lights look great, btw. You have some serious hangers to pull apart the BRZ lights, I thought about doing it to my EDM 86 lights but I can't bring myself to do it.

[civicdrivr]

That cutoff looks better. Ill have some free time tomorrow night after work to snap some pics of the RX + STI-Rs.

[Lee358]

Originally Posted by tbwoodlee

Lol me too, I was like this guy is a f'ing boss!

Lights look great, btw. You have some serious hangers to pull apart the BRZ lights, I thought about doing it to my EDM 86 lights but I can't bring myself to do it.

thanks its not that hard the worst part is the painting!

Originally Posted by civicdrivr

That cutoff looks better. Ill have some free time tomorrow night after work to snap some pics of the RX + STI-Rs.

alright sounds great!

I went out to the car seated the headlight fully

[civicdrivr]

Definitely looks like an RX bix cutoff.

How many washers did you end up using?

[Lee358]

One #6 washer on each corner


Sent from my iPhone using Tapatalk