BRZ headlight upgrade, paint, demon eyes (PICTURE HEAVY)

[civicdrivr]

Originally Posted by Lee358

Those are un tuned from about 10 feet i chose this route because in order to fit the sti-r you must use a sanding wheel to widen the lens holder the oem fits right back in... When i get home from colorado on tuesday im going to add washers to tune the cutoff. Should only take one #6 washer on all sides and some playing around. Either way with the sti-r or oem polished the projector must be tuned.


Sent from my iPhone using Tapatalk

These must use a different lens holder then. My STI-Rs dropped right into my set of RXs. No trimming or tuning required. It was one of the easiest projector mods I'd ever done.

Sent from my Nexus 4

[Lee358]

Originally Posted by civicdrivr

These must use a different lens holder then. My STI-Rs dropped right into my set of RXs. No trimming or tuning required. It was one of the easiest projector mods I'd ever done.

Sent from my Nexus 4

Hmm really? I was told by lightwerkz i would have to mod them ill look into it.


Sent from my iPhone using Tapatalk

[civicdrivr]

Originally Posted by Lee358

Hmm really? I was told by lightwerkz i would have to mod them ill look into it.


Sent from my iPhone using Tapatalk

That might just be the difference between the RX350 bix's and the BRZ bix's. The bowl and solenoid look identical though.

Sent from my Nexus 4

[Lee358]

When i get home ill try it... For someone who has done this mod before how do you make sure the lenses are seated correctly?


Sent from my iPhone using Tapatalk

[civicdrivr]

Originally Posted by Lee358

When i get home ill try it... For someone who has done this mod before how do you make sure the lenses are seated correctly?


Sent from my iPhone using Tapatalk

Check output, and make sure the lenses don't move around. If you want I can grab one of my RXs and take some pics later tonight.

Sent from my Nexus 4

[Lee358]

Originally Posted by civicdrivr

Check output, and make sure the lenses don't move around. If you want I can grab one of my RXs and take some pics later tonight.

Sent from my Nexus 4

Thanks that would be great only reason im worried is it looks like my lenses are not centered if you look at the right of the lens you see there is a little bit more of a lip visible

Attachment 31039


Sent from my iPhone using Tapatalk

[Lee358]

Sent from my iPhone using Tapatalk

[Murseman27]

Originally Posted by Lonewolf

Did you really just paint in your bathroom...getting overspray everywhere...lmao

hey in college i bought a bicycle and stripped it and painted it in my dorm bathroom

[Lee358]

Originally Posted by Murseman27

hey in college i bought a bicycle and stripped it and painted it in my dorm bathroom

What did you use to strip it?


Sent from my iPhone using Tapatalk

[Lee358]

@civicdrivr check out this thread

http://www.hidplanet.com/forums/show...non-Projectors

[civicdrivr]

Originally Posted by Lee358

@civicdrivr check out this thread

http://www.hidplanet.com/forums/show...non-Projectors

Check out TRSMatts response, he said the STI-R dropped right in. I'll have to double check mine, but I don't believe I used any washers on the lens holder. I didn't have a chance to get into the attic to grab them tonight, I'll check tomorrow and post some pics.

Sent from my Nexus 4

[Lee358]

yes there are a lot of mixed reviews i have both maybe ill try one and one see which turns out better. i just wish i had a good place to test them!

[civicdrivr]

You dont need a pitch black space to test them. Just go about 25ft from a wall and fire those puppies up. As long as its somewhat dark, you can see the light spread and tweak from there, if needed.

[Lee358]

Well im using the car to ignite them so thats the problem i dont have a 12 powerpack


Sent from my iPhone using Tapatalk