OFT - Control Minimum RPMs?

[D-VO]

Originally Posted by Kodename47

So I decided to have a play, I changed:
Idle stability (from MY17)
Idle ignition timing (increased a little)
Idle MAF Targets (increased a little)
Ensured idle fuel was slightly rich (negative trims)
Overrun tables (increase throttle at lower RPM to get close to Idle MAF Targets)

Best idle yet....

Sorry to revive an old thread. I'm trying to find anything that can help me with my idle issues after start up process is complete. Which Overrun tables are you talking about here?

[Kodename47]

Originally Posted by D-VO

Sorry to revive an old thread. I'm trying to find anything that can help me with my idle issues after start up process is complete. Which Overrun tables are you talking about here?

It's been a while since I posted that, but I believe, if on EcuTek, they are the tables at the bottom of the list titled something like Overrun Target.

[D-VO]

Originally Posted by Kodename47

It's been a while since I posted that, but I believe, if on EcuTek, they are the tables at the bottom of the list titled something like Overrun Target.

I'm on ECUFlash., Do any of these look familiar?

[Kodename47]

@D-VO there are 2 tables on EcuTek as per the Desired Overrun Mass Airflow you posted, that is what I referenced.