re-enable cold start on OTS stage 2 plus - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Kodename47 · 08-13-2020, 04:51 AM

Quote:

Originally Posted by D-VO

@steve99 Any ideas for me? I looked through some of the ROMRaider stuff but can't find then posted or in the 32bitbase.

If you're half decent with a computer, use this:
ScoobyROM

I used that to create a lot of my defs, in fact try and see if I did it for A01C:
K47 A01C Def

The locations between similar ROMs will not be far off, so take the 2 parts of the info from the B01C and all you should need to change is the address.

steve99 · 08-14-2020, 07:37 AM

Quote:

Originally Posted by D-VO

@steve99 Any ideas for me? I looked through some of the ROMRaider stuff but can't find then posted or in the 32bitbase.

what ecu calud you trying to efit ?

D-VO · 08-14-2020, 09:35 AM

Quote:

Originally Posted by Kodename47

If you're half decent with a computer, use this:
ScoobyROM

I used that to create a lot of my defs, in fact try and see if I did it for A01C:
K47 A01C Def

The locations between similar ROMs will not be far off, so take the 2 parts of the info from the B01C and all you should need to change is the address.

The tables are in there but the addresses and scalers are missing. 😔 I guess I have to figure out the program you shared. Thanks.

D-VO · 08-14-2020, 07:45 PM

Quote:

Originally Posted by steve99

what ecu calud you trying to efit ?

ZA1JA01C.

steve99 · 08-15-2020, 09:18 AM

Quote:

Originally Posted by D-VO

ZA1JA01C.

ok ill see if i have defs with those maf coreection tables

alternative would be to use a B01C or an A01G rom as a substitute which definitly have those tables defined

D-VO · 08-15-2020, 12:43 PM

Quote:

Originally Posted by steve99

ok ill see if i have defs with those maf correction tables

alternative would be to use a B01C or an A01G rom as a substitute which definitly have those tables defined

The B01C has a lot of tables that are not defined properly so I stopped using it. However, A01G you say? Hmm... I thinknI want to stay with A01C since it has most of what I use defined already. It's just missing the MAF correction after start tables.

*Edit* Tried A01G, car wouldn't start. i dont know if I missed a table or a setting was wrong but the car would not start. I ended up using ROMraider for the MAF correction tables to display properly. I'm still not able to properly define the scaling unit call "Mode Counter" for ECUFlash.

Kodename47 · 08-15-2020, 06:01 PM

@D-VO if you want B01C then I pretty much defined all the tables ages ago:
K47 B01C Definition

Contender · 08-16-2020, 06:04 PM

I hated cold start even before I went catless sounded retarded...

08-15-2020, 06:01 PM	#21
Kodename47 Senior Member Join Date: Oct 2012 Drives: UK GT86 Location: UK Posts: 3,040 Thanks: 185 Thanked 1,632 Times in 1,113 Posts Mentioned: 156 Post(s) Tagged: 1 Thread(s)	@D-VO if you want B01C then I pretty much defined all the tables ages ago: K47 B01C Definition __________________ .: Stealth 86 :. Abbey Motorsport/K47 Tuned Sprintex 210 Supercharger Kodename 47 DJ: Soundcloud / Instagram / Facebook

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need help to lower cold start w/OFT stage 1	vietspride70	Software Tuning	1	06-02-2021 04:17 AM
Cold Start Help	Kayysonie	Software Tuning	39	04-01-2016 12:35 AM
Cold start	JG	Engine, Exhaust, Transmission	8	08-29-2015 03:55 AM
E85 cold start	Turdinator	Software Tuning	8	08-29-2014 12:12 PM
White Smoke cold start up in Cold Weather (turbo cars)	whitefrs	Forced Induction	17	09-25-2013 06:05 PM

08-16-2020, 06:04 PM	#22
Contender Senior Member Join Date: Nov 2018 Drives: 2017 Toyota 86 Location: Washougal Posts: 130 Thanks: 6 Thanked 51 Times in 29 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I hated cold start even before I went catless sounded retarded...

User Name		Remember Me?
Password