OpenFlash Tablet: OTS v3.0 tune files ready for beta testing

[SuperTom]

Originally Posted by Breadman

here you go

That's all Shiv had to do was post it here and on his website. Would save him from getting 100's of emails a day. Time that could be spent on perfecting the tune

[Teseo]

Originally Posted by SuperTom

That's all Shiv had to do was post it here and on his website. Would save him from getting 100's of emails a day. Time that could be spent on perfecting the tune

Or he is on a Hospital or he will ditch the platform. I want a review like he did on v2, dynos comparisons and all that kind of crap.

[Breadman]

its actually looking better now but still slightly rich. im going to drive out to a friends so im going to try some highway pulls. here were my last 3 logs http://datazap.me/u/gnuworldorder/lo...5?log=0&data=1

[steve99]

Originally Posted by Breadman

its actually looking better now but still slightly rich. im going to drive out to a friends so im going to try some highway pulls. here were my last 3 logs http://datazap.me/u/gnuworldorder/lo...5?log=0&data=1

ok here is open loop fuel maps and WOT fuel map you cannot see in the tune

so it lloks like its doing what shiv intended ie its arround 11.7 full load high rpm.

You likely going to have to ignore the logged parameters "commanded AFR" as i looks like its not logging the true commanded afr.

also IAM from memory as it was logging a zero and incorrect

[steve99]

Stock K00C fuel mapping for comparision

[Wayno]

Originally Posted by steve99

You likely going to have to ignore the logged parameters "commanded AFR" as i looks like its not logging the true commanded afr.

OFT has never once logged true commanded afr, you know this already steve.

[steve99]

Originally Posted by Wayno

OFT has never once logged true commanded afr, you know this already steve.

haha, it was a reasonable approximation on older roms but on the 17 it looks like its logging the WOT fuel table only

[pym19109]

Is it possible to have a tactrix tutorial for beginner ?

Only one reason I bought OFT because there are many guide about OFT.

[Wayno]

Originally Posted by pym19109

Is it possible to have a tactrix tutorial for beginner ?

Only one reason I bought OFT because there are many guide about OFT.

- Install
- Select BRZ
- Add or copy definition if required
- Always select yes to correct checksums

No more easy or complicated than OFT, just different.

There's very little point unless you have the logger definitions for your calibration though, or you simply flash and log EU rom.

[pym19109]

Originally Posted by Wayno

- Install
- Select BRZ
- Add or copy definition if required
- Always select yes to correct checksums

No more easy or complicated than OFT, just different.

There's very little point unless you have the logger definitions for your calibration though, or you simply flash and log EU rom.

I think I wasted some money

[Wayno]

Originally Posted by pym19109

I think I wasted some money

Why? OFT is the only one you can have realtime display and log simultaneously. One isn't better than the other, they just have different uses.

[nikitopo]

Originally Posted by Wayno

Why? OFT is the only one you can have realtime display and log simultaneously. One isn't better than the other, they just have different uses.

Exactly

[Breadman]

Originally Posted by steve99

ok here is open loop fuel maps and WOT fuel map you cannot see in the tune

so it lloks like its doing what shiv intended ie its arround 11.7 full load high rpm.

You likely going to have to ignore the logged parameters "commanded AFR" as i looks like its not logging the true commanded afr.

also IAM from memory as it was logging a zero and incorrect

sounds good thanks. logging is kind of weird on the 17 it looks like. for example maf voltage is just a constant 0...

[nunonuna]

Originally Posted by Wayno

Why? OFT is the only one you can have realtime display and log simultaneously. One isn't better than the other, they just have different uses.

Agreed.

Also, It is so funny to see many of my local friends who have Ecutek in there 86 saying Ecutek is much better than OFT while none of them do even a single data logging.

나의 SM-N950U 의 Tapatalk에서 보냄