OpenFlash Tablet: OTS v2.0 Beta (132 new maps, 12 new XMLs) Available for Download

[steve99]

Originally Posted by DC2R

Sorry if obvious but this doesn't affect B01C tunes right?

Sent from my SM-N900T using Tapatalk

the V2.03 tunes are now based on the latest D00C ROMs for USA/canada the earlier V2.0X were based on B01C ROM's i believe.

[DC2R]

Originally Posted by steve99

the V2.03 tunes are now based on the latest D00C ROMs for USA/canada the earlier V2.0X were based on B01C ROM's i believe.

Any point in reflashing?

Sent from my GT-N5110 using Tapatalk

[steve99]

Originally Posted by DC2R

Any point in reflashing?

Sent from my GT-N5110 using Tapatalk

I don't think anyone has looked into the ROM logic AFAIK and shiv did not mention any changes to defined tables. But if you want the latest ROM D00 revision flash away. The toyota/subaru guys are probably just updating ROM for idle stability with A/con or something but that just a guess

[Wepeel]

Really dumb question - my ECU was A01C. I'm assuming I should load the corresponding A01c file to my OFT... correct? There's no benefit to loading a more recent cal (if this is even possible)?

EDIT nevermind the answer was right at the top of the page

[CamryDS]

Originally Posted by steve99

the V2.03 tunes are now based on the latest D00C ROMs for USA/canada the earlier V2.0X were based on B01C ROM's i believe.

Are you sure? that's not what the update says....
8/05/14
v2.03b
-Revised ZA1D00C XML that fixes minor definition errors.
-Revised Stage 2 E85 UEL D00C and Stage 2 E85 EL D00C files with corrected cranking enrichment values


and the earlier:
7/24/14
v2.0b
-Tune map support for only USDM ROMs
-All ROMs are based on latest factory software (B01C and B01D)
-91oct, 93oct and E85 maps are available.
-New XML files for all USDM ROMs. If you want to edit the OTS map, you MUST use the supplied beta XMLs. Delete the old XML file from your ROM Raider folder as they are not longer applicable.

All I see is that 7/24/14 says that the new roms from 2.0b is based on factor B01C and B01D

The newest update 2.03 only revises ZA1D00C XML, which shows true since all the other roms are the same and contains the same date as 7/24/14

[steve99]

Originally Posted by CamryDS

Are you sure? that's not what the update says....
8/05/14
v2.03b
-Revised ZA1D00C XML that fixes minor definition errors.
-Revised Stage 2 E85 UEL D00C and Stage 2 E85 EL D00C files with corrected cranking enrichment values


and the earlier:
7/24/14
v2.0b
-Tune map support for only USDM ROMs
-All ROMs are based on latest factory software (B01C and B01D)
-91oct, 93oct and E85 maps are available.
-New XML files for all USDM ROMs. If you want to edit the OTS map, you MUST use the supplied beta XMLs. Delete the old XML file from your ROM Raider folder as they are not longer applicable.

All I see is that 7/24/14 says that the new roms from 2.0b is based on factor B01C and B01D

The newest update 2.03 revised ZA1D00C XML, which shows true since all the other roms are the same and contains the same date as 7/24/14

If they are supplying a ZA1D00C/D xml files in v2.03 then the roms will be based on that ie D00C/D as the definition/structure is different from the B01C/D based ROM

The revision to the D00 xml files was because of a definition errors for some of the tables.

I think 2.02 was the initial D00 based ROM release superseded when the XML file was corrected.and release 2.03

You need to be careful which definitions you use to edit ROM if you have copy's of the 2.00 or 2.01 use the defs that come with the ROM zip file else nasty things will happen = car no starty ECU = no respondy = you not happy




from your post
7/24/14
v2.0b
-Tune map support for only USDM ROMs
-All ROMs are based on latest factory software (B01C and B01D)


v2.03b
-Revised ZA1D00C XML that fixes minor definition errors.
-Revised Stage 2 E85 UEL D00C and Stage 2 E85 EL D00C files with corrected cranking enrichment values


The 2.03 versions are D00C/D based D00 defs will not work with B01C/D ROM,s and vice versa.

[CamryDS]

Originally Posted by steve99

If they are supplying a ZA1D00C/D xml files in v2.03 then the roms will be based on that ie D00C/D as the definition/structure is different from the B01C/D based ROM

The revision to the D00 xml files was because of a definition errors for some of the tables.

I think 2.02 was the initial D00 based ROM release superseded when the XML file was corrected.and release 2.03

You need to be careful which definitions you use to edit ROM if you have copy's of the 2.00 or 2.01 use the defs that come with the ROM zip file else nasty things will happen = car no starty ECU = no respondy = you not happy




from your post
7/24/14
v2.0b
-Tune map support for only USDM ROMs
-All ROMs are based on latest factory software (B01C and B01D)


v2.03b
-Revised ZA1D00C XML that fixes minor definition errors.
-Revised Stage 2 E85 UEL D00C and Stage 2 E85 EL D00C files with corrected cranking enrichment values


The 2.03 versions are D00C/D based D00 defs will not work with B01C/D ROM,s and vice versa.

For people who just flash, this won't apply then, happy editing.

[Knickstape]

So I don't have a header yet. Do you guys think its still worth getting the oft? Anyone come from a unichip to this? That's what I'd be switching from

[PantsDants]

Originally Posted by Knickstape

So I don't have a header yet. Do you guys think its still worth getting the oft? Anyone come from a unichip to this? That's what I'd be switching from

I did exactly that, and yes, it's worth it even for stage 1. The off-the-shelf tunes are better, you can modify tunes to your liking, and you can data log to keep tabs on what your engine is doing. Plus you get a discount on their header if you decide to go that route eventually.

[Knickstape]

Originally Posted by PantsDants

I did exactly that, and yes, it's worth it even for stage 1. The off-the-shelf tunes are better, you can modify tunes to your liking, and you can data log to keep tabs on what your engine is doing. Plus you get a discount on their header if you decide to go that route eventually.

That's sounds great to me! Now to sell the unichip! I appreciate the reply man

[unsurety]

Is the high rev cold start dialed back some with these latest maps? Or do we still need to modify those values with Romraider? It's slightly complicated looking, but I'm more lazy than anything.

Can we just get UEL/EL maps with the cold start ignition retard disabled? If I had to guess, I'd think there are fewer catted setups out there than catless.

Originally Posted by PantsDants

I did exactly that, and yes, it's worth it even for stage 1. The off-the-shelf tunes are better, you can modify tunes to your liking, and you can data log to keep tabs on what your engine is doing. Plus you get a discount on their header if you decide to go that route eventually.

I agree. I don't have a header - only a catback. The OFT was my first engine/exhaust mod.

[8686]

Dear @Shiv@Openflash
when you think the 700K seriers 2.0 maps will be available?

Thank you

[troek]

Originally Posted by unsurety

Is the high rev cold start dialed back some with these latest maps? Or do we still need to modify those values with Romraider? It's slightly complicated looking, but I'm more lazy than anything.

.

I dont think its incorporated, but if you need help let me know.

[DC2R]

Any benefit coming from 2.01 stage 2?uel

Sent from my SM-N900T using Tapatalk