OpenFlash Tablet: OTS v2.0 Beta (132 new maps, 12 new XMLs) Available for Download

[Tromatic]

Driving with the latest version is pushing me hard towards the OFH and then a Phantom ESC.

[brzaapi]

Originally Posted by Shiv@Openflash

Edit (8/4/14): v2.02 just released. As noted in the read me file, the only change is that ZA1JD00C (2015 USDM 6MT) OTS Maps/XML support was added to download folder.

More 2015 ROM support coming soon....

Its great to hear that the 2015 maps are ready to go. I have been waiting eagerly. I cant wait for the Cayman 987.2 OFT to be ready.


Bad thing is I still got the BRZ on jacks since I was unable to get a detent bolt back into my tranny case while installing some MTEC springs. That bolt kicked my tail for almost 3 hours before the heat took it out of me and I called it a day. The bolt keeps trying to crossthread, but there isn't any real damage yet... so I assume I will be able to get it.


Then a reflash and E85 here I come. Can't wait for the my OFH to come in. Thanks Shiv.

[sinned706]

i can't seem to get 2.2 XML's to load with 2.2 maps on Romraider. Doesn't seem to be working, but i can get 2.0 XML's to load with 2.0 maps.

[solidONE]

Been driving around with the STG1 2.01. I'm not sure if it just my imagination or the low rpm, partial throttle seems a whole lot more peppier. Feels very strong while just putting along with partial throttle.

[vynervt]

Originally Posted by ML

what is the difference between B01c, and D00c technically?

There is Transient Ignition Retard different between B01C and D00C. Will this a good improve from Manufacturer?

Others map:
Cranking Fuel Injector Pulse Width F(ECT)
Misfire Count MAP Threshold A & B

[troek]

I put 15 grand in parts on my car, now i need overnight roms for japan. Otherwise i wont decimate all.

[Shiv@Openflash]

Originally Posted by solidONE

Been driving around with the STG1 2.01. I'm not sure if it just my imagination or the low rpm, partial throttle seems a whole lot more peppier. Feels very strong while just putting along with partial throttle.

You'r enot imagining it. The revised MAF scaling is the biggest contributor to the partial throttle response/torque. Glad you like it

[steve99]

Originally Posted by troek

I put 15 grand in parts on my car, now i need overnight roms for japan. Otherwise i wont decimate all.

If you rearly keen you could do you own rom. compare a V1.5 C series with V2 C series then Copy all table changes to your series ROM then send to shiv to save him some work

[troek]

Originally Posted by steve99

If you rearly keen you could do you own rom. compare a V1.5 C series with V2 C series then Copy all table changes to your series ROM then send to shiv to save him some work

Thats not a bad idea. Sounds simple, almost too simple, lol. Im out of town till next week, ill have to take a look when i get home. @Shiv@Openflash , thoughts?

[Kodename47]

Originally Posted by vynervt

There is Transient Ignition Retard different between B01C and D00C. Will this a good improve from Manufacturer?

Others map:
Cranking Fuel Injector Pulse Width F(ECT)
Misfire Count MAP Threshold A & B

That transient table doesn't look right, mostly positive values which would be adding timing in those areas. Perhaps the base value is off?


Might be worth starting a new thread with the D00 ROM changes and post in full That way others will be able to make use of the changes now.

[steve99]

Originally Posted by Kodename47

That transient table doesn't look right, mostly positive values which would be adding timing in those areas. Perhaps the base value is off?


Might be worth starting a new thread with the D00 ROM changes and post in full That way others will be able to make use of the changes now.

Yep think you called it looks like it off by + 20, subtract 20 from values in D00 and it pterry much same as before

[vynervt]

Originally Posted by steve99

Yep think you called it looks like it off by + 20, subtract 20 from values in D00 and it pterry much same as before

@steve99, You are right is about 20. I have compare the conversion table. As show in the photo i attached.

On LHS is ROM B01C & RHS is ROM D00.

[steve99]

Originally Posted by vynervt

@steve99, You are right is about 20. I have compare the conversion table. As show in the photo i attached.

On LHS is ROM B01C & RHS is ROM D00.

Yes looks like Definition needs fix will email @Shiv@Openflash

what do the other changed tables look like ?

[makinen]

Originally Posted by troek

Thats not a bad idea. Sounds simple, almost too simple, lol. Im out of town till next week, ill have to take a look when i get home. @Shiv@Openflash , thoughts?

You can do it.
Already done with BPB beta and 2.0 beta.
Much better than 1.5x.