OpenFlash Tablet: Multi-Gauge Function and FLKC logging

[WNDSRFR]

Originally Posted by Fizz

@shiv@vishnu a couple of days ago I noticed my OFT display missing the names for channels in 'realtime' and 'configure'. Can anyone tell me how to fix this? Logging still works....just that I can't see what channels to select.

I had this same problem a few hours ago.


I just downloaded the new Open Flash Manager and the Template File for Firmware 1.26 and up.
Then I loaded the Template File into the OFM and everything works fine.
Except in the Datalogging Program it says I have 72 PSI of boost when I am in vacuum. It reads correctly in real time but the datalogger always says 72 PSI when not in boost.


Another thing I noticed is that I am never in 100% throttle. Do you think I need to adjust my gas pedal stop?

[WNDSRFR]

Oh,


by the way I have the Phantom ESC so the max boost ever would be less than 5 PSI.

[Fizz]

Originally Posted by shiv@vishnu

Before you go to the realtime data screen, go to channel configuration screen. Press right arrow to save effects of new template. Then go to the realtime data screen.

Tried that but no luck still. I also noticed that my "ECU Type" says Denso GT87. Is that supposed to be normal?

[steve99]

Originally Posted by Fizz

Tried that but no luck still. I also noticed that my "ECU Type" says Denso GT87. Is that supposed to be normal?

Mine says Denso GT87 that to so looks normal, says ECU type gt86 in another section though.

might be worth going to vehicle list and re-selecting toyota >> GT86 as vehicle type in case OFT has got confused

[makinen]

Originally Posted by shiv@vishnu

Before you go to the realtime data screen, go to channel configuration screen. Press right arrow to save effects of new template. Then go to the realtime data screen.

I upgraded back to the previous template file, "FRS Customized 1_26.SLT" last night but didn't try on the vehicle.

Today I upgraded again "FRS Customized 3.SLT" and tried on the vehicle. It works! Even before configuring channels, channel names displayed.

[troek]

subbed for release of FLKC support on overseas roms

[Fizz]

Originally Posted by makinen

I upgraded back to the previous template file, "FRS Customized 1_26.SLT" last night but didn't try on the vehicle.

Today I upgraded again "FRS Customized 3.SLT" and tried on the vehicle. It works! Even before configuring channels, channel names displayed.

I tried doing exactly that as well...but still not having any success

@shiv@vishnu can you please advise what to do.

[steve99]

Originally Posted by troek

subbed for release of FLKC support on overseas roms

works fine for me on g rom

[troek]

Originally Posted by steve99

works fine for me on g rom

oh i havnt actually tried yet. i was just going off the post by shiv. maybe im reading behind the times and hes already released it lol.

[cruizin01]

My channel names were blank also. Had to install the new manager. Works fine now.

[Fizz]

I'm such an idiot for missing the glaringly obvious. I've now updated to 1.07.1 and now all my channel names have re-appeared! LOL

[makinen]

@shiv@vishnu

I've uploaded some pulls with A01E+BPB91+mod rom.
http://datazap.me/u/makinenkr/201404...=1&data=1-6-12

With my A01E rom, FLKC was logged with 0 or 100 values. Is this working correctly?

Thanks.

[troek]

Mines doing the same thing. Shiv has never said that its supported for overseas roms yet (or i missed it), it just seems to work for some.

[Shiv@Openflash]

Hi guys,
FLKC has only been tested in C series OTS maps. I suspect it will work in D series OTS maps as well. As for non-USDM OTS maps, we will test and add support over the next few days/week