A BRZ and a welder walk into a bar... - Page 28 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

gramicci101 · 03-12-2014, 06:21 PM

That was what I was talking about, I was just curious. Thanks.

mrk1 · 03-12-2014, 09:14 PM

Forgot to add these, I closed the gap on top of the radiator. I purposely made the panel too small because there will be edging added.

markmatley · 03-12-2014, 09:31 PM

Quote:

Originally Posted by mrk1

Forgot to add these, I closed the gap on top of the radiator. I purposely made the panel too small because there will be edging added.

*spooge* I did it again...daaamammmiiitttt.

I hope you took notes/measurements on your build, get cad drawings done, market the design, and take my money!

mrk1 · 03-12-2014, 09:38 PM

Quote:

Originally Posted by markmatley

*spooge* I did it again...daaamammmiiitttt.

I hope you took notes/measurements on your build, get cad drawings done, market the design, and take my money!

haha, I don't think people would like the price of this "kit". Most people seem to shop by price not by whats in the box.

mrk1 · 03-13-2014, 12:45 PM

GTX water lines mounted

Kotu100 · 03-13-2014, 01:06 PM

Absolutely AMAZING work.

I'd love to come check out the shop and car sometime if you'll have me.

mrk1 · 03-13-2014, 02:17 PM

Quote:

Originally Posted by Kotu100

Absolutely AMAZING work.

I'd love to come check out the shop and car sometime if you'll have me.

@Kotu100, sure let me know when you want to stop by. Always good to chat with locals. I'll PM you the address.

mrk1 · 03-17-2014, 08:36 PM

Still calling around working out what to do for a tune. To be ready for anything I made a upper intercooler pipe to accommodate a MAF sensor. This should be enough straight section to give clean readings.

Decay107 · 03-19-2014, 05:05 AM

Quote:

Originally Posted by mrk1

I don't like driving without it, I'm on the 4th variation of it I think. The one above is the 3rd. Just small tweaks now to make the end brackets more stout.

This is the final variation, see the top corners are slightly different, this is now powder coated red to match the front bars.

If you ever make this available you have a buyer right here

djdnz · 03-19-2014, 11:40 AM

Quote:

Originally Posted by mrk1

Still calling around working out what to do for a tune. To be ready for anything I made a upper intercooler pipe to accommodate a MAF sensor. This should be enough straight section to give clean readings.

Have you already cut/welded in the MAF mount? Just based on what I've read on other parts of the forum it might be worth moving it a bit more towards the centre of that straight section. I seem to recall reading that having straight flow both in and out was important.

m04davis · 03-19-2014, 12:15 PM

Neeeed that rear brace!!

mrk1 · 03-19-2014, 01:24 PM

Quote:

Originally Posted by djdnz

Have you already cut/welded in the MAF mount? Just based on what I've read on other parts of the forum it might be worth moving it a bit more towards the centre of that straight section. I seem to recall reading that having straight flow both in and out was important.

Already welded in place, whats not in the picture is the BOV mount which is right after that first bend. I didn't want the sensor closer to that turbulence. Locating these stupid things is a large reason I want to run SD.

And having straight section before and after is great on paper but good luck actually making that happen in a car.

Kotu100 · 03-21-2014, 10:23 PM

You made it on oppo!
http://oppositelock.jalopnik.com/omg...r-s-1548911064

mrk1 · 03-21-2014, 11:12 PM

Quote:

Originally Posted by Kotu100

You made it on oppo!
http://oppositelock.jalopnik.com/omg...r-s-1548911064

haha what is oppo?

03-12-2014, 09:14 PM	#380
mrk1 Senior Member Join Date: Mar 2013 Drives: Sterling BRZ Ltd Location: New England Posts: 1,702 Thanks: 403 Thanked 1,389 Times in 671 Posts Mentioned: 21 Post(s) Tagged: 2 Thread(s)	Forgot to add these, I closed the gap on top of the radiator. I purposely made the panel too small because there will be edging added. __________________ The Build Thread GT28RS - eBoost2 - 3.91 Final Drive - Supra LSD

03-13-2014, 12:45 PM	#383
mrk1 Senior Member Join Date: Mar 2013 Drives: Sterling BRZ Ltd Location: New England Posts: 1,702 Thanks: 403 Thanked 1,389 Times in 671 Posts Mentioned: 21 Post(s) Tagged: 2 Thread(s)	GTX water lines mounted __________________ The Build Thread GT28RS - eBoost2 - 3.91 Final Drive - Supra LSD

03-17-2014, 08:36 PM	#386
mrk1 Senior Member Join Date: Mar 2013 Drives: Sterling BRZ Ltd Location: New England Posts: 1,702 Thanks: 403 Thanked 1,389 Times in 671 Posts Mentioned: 21 Post(s) Tagged: 2 Thread(s)	Still calling around working out what to do for a tune. To be ready for anything I made a upper intercooler pipe to accommodate a MAF sensor. This should be enough straight section to give clean readings. __________________ The Build Thread GT28RS - eBoost2 - 3.91 Final Drive - Supra LSD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AMR Performance: How to remove the factory bumper (walk-through images inside)	AMR	Engine, Exhaust, Transmission	9	04-10-2013 08:45 PM
86 Modelista walk around and GT Limited	SoCal_86	Scion FR-S / Toyota 86 GT86 General Forum	3	04-24-2012 12:53 PM

03-12-2014, 06:21 PM	#379
gramicci101 Off Topic Join Date: Feb 2014 Drives: 2014 Subaru BRZ Limited Location: Vegas, baby! Posts: 4,610 Thanks: 2,369 Thanked 4,243 Times in 2,170 Posts Mentioned: 43 Post(s) Tagged: 3 Thread(s)	That was what I was talking about, I was just curious. Thanks.

03-13-2014, 01:06 PM	#384
Kotu100 Senior Member Join Date: Mar 2014 Drives: Supra, 2014 BRZ Location: Stoughton, MA Posts: 327 Thanks: 241 Thanked 192 Times in 82 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Absolutely AMAZING work. I'd love to come check out the shop and car sometime if you'll have me.

03-19-2014, 12:15 PM	#389
m04davis Junior Member Join Date: Oct 2013 Drives: 2013 white scion frs Location: madison, oh Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Neeeed that rear brace!!

03-21-2014, 10:23 PM	#391
Kotu100 Senior Member Join Date: Mar 2014 Drives: Supra, 2014 BRZ Location: Stoughton, MA Posts: 327 Thanks: 241 Thanked 192 Times in 82 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	You made it on oppo! http://oppositelock.jalopnik.com/omg...r-s-1548911064

User Name		Remember Me?
Password