Pic Request: 17x9 on stock suspension - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

knipple · 08-15-2013, 05:56 PM

I am running -1.0 degrees of camber in the front with Enkei RPF-1 17X9 et +35 using BFGoodrich Gforce Rival tires 255/40/17. I have almost no clearance between the tires and the spring perches in the front. I currently have no rubbing.

2pt5RS · 02-25-2014, 02:18 PM

I was so set on getting a set of 17x9 RPF1s on stock suspension until I saw this thread.

jonbonazza · 02-25-2014, 02:47 PM

OT: Will 17x9+45 clear factory shocks with RCE springs as well as stock suspension?

wparsons · 02-25-2014, 02:50 PM

Quote:

Originally Posted by 2pt5RS

I was so set on getting a set of 17x9 RPF1s on stock suspension until I saw this thread.

Just get +35 instead of +45 and you'll be fine.

2pt5RS · 02-25-2014, 02:58 PM

Quote:

Originally Posted by wparsons

Just get +35 instead of +45 and you'll be fine.

I'm not as concerned about the rubbing as I am the rally look. I want it to look better than that.

Maybe I'm oblivious, but is that how stock looks?!

hmong337 · 02-25-2014, 03:57 PM

Quote:

Originally Posted by 2pt5RS

I'm not as concerned about the rubbing as I am the rally look. I want it to look better than that.

Maybe I'm oblivious, but is that how stock looks?!

The stock height is hideous. I actually just got my set of wheels. Went with 18x9 +38 around and will not be mounting them until I lower the car with either springs or coilovers.

2pt5RS · 02-25-2014, 04:14 PM

Quote:

Originally Posted by hmong337

The stock height is hideous. I actually just got my set of wheels. Went with 18x9 +38 around and will not be mounting them until I lower the car with either springs or coilovers.

yeah...my problem is that I already scrape all over atlanta. lowering the car would make me scrape MORE. Although, I guess I could take the HT Autos front lip off. :\

IAmNotTheDriftKing · 02-27-2014, 05:32 PM

Anyone running a 17x9 with a 40mm or greater offset with about -1.5 degrees of camber?

leicaboss · 02-27-2014, 05:49 PM

Quote:

Originally Posted by 2pt5RS

yeah...my problem is that I already scrape all over atlanta. lowering the car would make me scrape MORE. Although, I guess I could take the HT Autos front lip off. :\

I hear your pain my friend. Personally, mine has a rally-inspired look. The Rally Armor mudflaps help give it that nature too! Especially with Black RPF1's

vroom4 · 02-27-2014, 06:34 PM

Quote:

Originally Posted by IAmNotTheDriftKing

Anyone running a 17x9 with a 40mm or greater offset with about -1.5 degrees of camber?

Yes, look at MachV's comments in this thread. He has both sides of the -1.5

-1 with oem crash bolts and -2 with top hats. Both work with his +42 wheels.

IAmNotTheDriftKing · 02-27-2014, 07:08 PM

Quote:

Originally Posted by vroom4

Yes, look at MachV's comments in this thread. He has both sides of the -1.5

-1 with oem crash bolts and -2 with top hats. Both work with his +42 wheels.

I read about the top hats but I didn't see anything with the crash bolts. -1 degree would be fine I guess, I don't want to spend to more than 1000 dollars on wheels(excluding tires) and suspension, so top hats are a no go.

Anybody else running camber on a 42mm offset?

Fez96 · 02-23-2017, 03:24 PM

Quote:

Originally Posted by Lee358

17x9 +45 rpf1 with 245/40/17
Attachment 46737 Attachment 46738 Attachment 46739 Attachment 46740
The last picture is the distance between the tire and the coil i have had no rubbing in the last month since install. Wait thats a lie i rubbed once pulling into my very steep driveway thats about it.

Are you on stock suspension because I'm on TRD springs and my Rpf1 won't even go on the car because it just hits the spring in the front

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Group Buy: Enkei RPF1 17x9 +35, 17x9.5 +38, 18x9.5 +38 *In Stock*	LSD Motorsports	Groupbuys	246	08-29-2013 02:35 PM
Picture Request: Stock Turanzas on 8" wide wheels	Robmilkshakes	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	1	02-17-2013 07:05 PM
WORK Emotion CR Ultimate (Kiwami) - 17x9 +38mm 5x100 IN STOCK NOW	RavSpec	Wheels and Tires	14	12-01-2012 01:26 AM
17x9 with stock tires?	Lee358	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	21	08-09-2012 05:36 AM
Stock Rims Request	Double4Free	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	0	03-03-2012 04:10 PM

02-25-2014, 02:18 PM	#44
2pt5RS Berz Join Date: May 2012 Drives: 2013 BRZ Location: -=ATL=- Posts: 707 Thanks: 281 Thanked 294 Times in 158 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	I was so set on getting a set of 17x9 RPF1s on stock suspension until I saw this thread.

02-27-2014, 05:32 PM	#50
IAmNotTheDriftKing Senior Member Join Date: Feb 2013 Drives: I own an FR-S. . . whatelse! Location: Northwest Indiana Posts: 318 Thanks: 114 Thanked 140 Times in 84 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Anyone running a 17x9 with a 40mm or greater offset with about -1.5 degrees of camber?

User Name		Remember Me?
Password