Will this fit? (width, offset and tire size Qs) - Page 141 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Fast_Freddy · 11-23-2013, 01:15 AM

Will 245-40-17 fit on 17x8 +35 rims with no rubbing or should I stick with 225-45? Stock springs and no intention of changing them. Could I do 225-45 up front and 245-40 in back or would it look weird on 8" rims? TIA

BrunoM · 11-24-2013, 07:49 AM

Quote:

Originally Posted by BrunoM

Hi Slick and thank you for your answer.

That's because I have searched for this setup and haven't found it that I ask. The only guy saying he has tried it is Slance86
http://www.ft86club.com/forums/showp...1&postcount=47
He had 18x9.5 +38 wheels, stock coilover, and Eibach Sportline on 235/40/18.

An wheeldude has the 255/35/18 setup on stock coilover and Eibach Sportline with no issue

That's why I asked if someone else has already try this setup because I will try this one in max 10 days, my Sportline springs are already in shipping process.
Without any drop, there are no issue at all with my 18x9.5 +38 Rota Grid on my 235/40/18, and I hope Slance86 is right when he says there is no rubbing issue with some drop with Eibach Sportline springs. I doubt but I hope. I got Camber bolts too to see the limit of that setup.

Has other one guys, I like the concave it make in that wheel setup. I hope it will be ok because it would be cool to get this setup

Thank you all of you for all your answers on that thread, it's very helpfull

Hi everybody.
Just got my sportline springs install yesterday. I have no coilover. I am running rota grid 18x9.5 et38 with 235/40/18 all around and there is no issue for the moment. And I love the look this setup is giving to the car.
There is only 1 or 2 mm between the struts and the tire but it's ok. What you have to do to be sure to stay align is to mark the front bolts before get them out so you can reinstall them exactly as the were.
I hope it will help

anewprelusion · 11-30-2013, 02:54 PM

Will this fit?

WedsSport SA67R - 18x9.0 +36mm 5x100 (Square)
Tires = 225/40 or 245/35 (Want to keep apprx stock diameter)

Lowered on Swift Springs with front SPC Camber Bolts & Rear LCA's

Thanks!

Slick · 11-30-2013, 03:44 PM

Quote:

Originally Posted by anewprelusion

Will this fit?

WedsSport SA67R - 18x9.0 +36mm 5x100 (Square)
Tires = 225/40 or 245/35 (Want to keep apprx stock diameter)

Lowered on Swift Springs with front SPC Camber Bolts & Rear LCA's

Thanks!

Yes, no issues.
I'm pretty much on the same setup but +35. Go with the 245/35R18 as it gives you the perfect diameter and better suited for that wheel.

knoteasy25 · 12-04-2013, 07:28 PM

Quote:

Originally Posted by JoeBoxer

I would run either 8.5 or 9 all around, no real need to stagger for a half inch. You could run 8.5 with 225/40 or 235/40 or 18x9 with 245/35 or 255/35.

Edit you could run 235/40 on the 9" all around also

I am interested in these same wheels with 18 235/40 or 225 square on stock suspension. I like the concave look what offset can I get without any poke.
Square and Staggered.
Thank you

juanam0909 · 12-04-2013, 08:09 PM

Quote:

Originally Posted by RavSpec

With just spring , won't work. Need camber arms .

Front might work, rear major poke.

It worked

Sent from my LGMS769 using Tapatalk

kkkirbyyy · 12-08-2013, 12:11 AM

Hey guys, im getting 57 extremes 18x 9.5 +40. looking to drop around 2.3-2.5 inches on KW V3's. I wanna know if I can run 245/40's with no rub or would I have to be 245/35...I wanna get the meatier end of the deal without rubbing. thanks in advance!

Freshfrs86 · 12-09-2013, 03:53 AM

This is a great thread. I have two different setups in mind it just depends if I want to be patient or not lol
1st - is cosmis XT-206R 18x9.5 +10 with a 15mm wheel adapter tires 245/40
2nd (me being patient) - same rim/size but +35 5x100 no adapter 3mm spacer F, 5mm spacer R
FYI this rim does have concave
Lowered possibly 1.5 not sure right now.

ft86me · 12-09-2013, 03:56 AM

Confirming that my 18x10 +44 fit with no problem on kw v3 coils w stock drop from kw factory. Camber was left the same as my 18x9.5 +38 setup. Gotta admit the setup now looks cleaner! Hope this helps.

Sent from my iPhone using Tapatalk

Freshfrs86 · 12-09-2013, 03:57 AM

Quote:

Originally Posted by ft86me

Confirming that my 18x10 +44 fit with no problem on kw v3 coils w stock drop from kw factory. Camber was left the same as my 18x9.5 +38 setup. Gotta admit the setup now looks cleaner! Hope this helps.

Sent from my iPhone using Tapatalk

Link to pics?

ft86me · 12-09-2013, 04:00 AM

Only have two pics right now that are cell phone pics which are on my signature for my build and a little video on instagram profile @Freshfrs86

Sent from my iPhone using Tapatalk

Freshfrs86 · 12-09-2013, 04:16 AM

@ft86me how much camber did you have? About how low are you? Have you or are dialed in yet or keeping it where you had last? Are you comparing your setup to my 1st plan, 2nd plan or both?

ft86me · 12-09-2013, 04:17 AM

Quote:

Originally Posted by Freshfrs86

@ft86me how much camber did you have? About how low are you? Have you or are dialed in yet or keeping it where you had last? Are you comparing your setup to my 1st plan, 2nd plan or both?

Oh I was just confirming that my setup fits for people that are wondering. For your setup I'm not sure what settings you will need.

Sent from my iPhone using Tapatalk

Freshfrs86 · 12-09-2013, 04:18 AM

Ok thanks! That does give me an idea though.

12-09-2013, 04:00 AM	#1971
ft86me Senior Member Join Date: Feb 2013 Drives: 2013 FRS Location: Endor Posts: 1,231 Thanks: 802 Thanked 349 Times in 212 Posts Mentioned: 60 Post(s) Tagged: 1 Thread(s)	Will this fit? (width, offset and tire size Qs) Only have two pics right now that are cell phone pics which are on my signature for my build and a little video on instagram profile @Freshfrs86 Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Determining the proper width size of the tire	CyberFormula	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	49	05-23-2014 10:11 AM
Correct tire width for each wheel width	DarrenDriven	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	10	08-16-2012 03:03 PM
TIRE SIZE CALCULATOR	White64Goat	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	6	08-15-2012 03:31 AM
Tire Width vs Wheel Width	Synack	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	40	08-13-2012 12:21 AM

11-23-2013, 01:15 AM	#1961
Fast_Freddy Senior Member Join Date: Jul 2012 Drives: Passat Location: East Coast Posts: 626 Thanks: 331 Thanked 188 Times in 130 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Will 245-40-17 fit on 17x8 +35 rims with no rubbing or should I stick with 225-45? Stock springs and no intention of changing them. Could I do 225-45 up front and 245-40 in back or would it look weird on 8" rims? TIA

11-30-2013, 02:54 PM	#1963
anewprelusion Senior Member Join Date: Sep 2013 Drives: 2013 Subaru BRZ Limited Location: California Posts: 148 Thanks: 51 Thanked 86 Times in 46 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Will this fit? WedsSport SA67R - 18x9.0 +36mm 5x100 (Square) Tires = 225/40 or 245/35 (Want to keep apprx stock diameter) Lowered on Swift Springs with front SPC Camber Bolts & Rear LCA's Thanks!

12-08-2013, 12:11 AM	#1967
kkkirbyyy Senior Member Join Date: Mar 2013 Drives: 2015 STi and '93 Sentra Se-r Location: Glendale/Burbank Ca Posts: 131 Thanks: 77 Thanked 81 Times in 46 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	Hey guys, im getting 57 extremes 18x 9.5 +40. looking to drop around 2.3-2.5 inches on KW V3's. I wanna know if I can run 245/40's with no rub or would I have to be 245/35...I wanna get the meatier end of the deal without rubbing. thanks in advance!

12-09-2013, 03:53 AM	#1968
Freshfrs86 Senior Member Join Date: Jun 2013 Drives: Scion FRS Location: Tampa, Fl Posts: 197 Thanks: 235 Thanked 48 Times in 40 Posts Mentioned: 9 Post(s) Tagged: 1 Thread(s)	This is a great thread. I have two different setups in mind it just depends if I want to be patient or not lol 1st - is cosmis XT-206R 18x9.5 +10 with a 15mm wheel adapter tires 245/40 2nd (me being patient) - same rim/size but +35 5x100 no adapter 3mm spacer F, 5mm spacer R FYI this rim does have concave Lowered possibly 1.5 not sure right now.

12-09-2013, 03:56 AM	#1969
ft86me Senior Member Join Date: Feb 2013 Drives: 2013 FRS Location: Endor Posts: 1,231 Thanks: 802 Thanked 349 Times in 212 Posts Mentioned: 60 Post(s) Tagged: 1 Thread(s)	Confirming that my 18x10 +44 fit with no problem on kw v3 coils w stock drop from kw factory. Camber was left the same as my 18x9.5 +38 setup. Gotta admit the setup now looks cleaner! Hope this helps. Sent from my iPhone using Tapatalk

12-09-2013, 04:16 AM	#1972
Freshfrs86 Senior Member Join Date: Jun 2013 Drives: Scion FRS Location: Tampa, Fl Posts: 197 Thanks: 235 Thanked 48 Times in 40 Posts Mentioned: 9 Post(s) Tagged: 1 Thread(s)	@ft86me how much camber did you have? About how low are you? Have you or are dialed in yet or keeping it where you had last? Are you comparing your setup to my 1st plan, 2nd plan or both?

12-09-2013, 04:18 AM	#1974
Freshfrs86 Senior Member Join Date: Jun 2013 Drives: Scion FRS Location: Tampa, Fl Posts: 197 Thanks: 235 Thanked 48 Times in 40 Posts Mentioned: 9 Post(s) Tagged: 1 Thread(s)	Ok thanks! That does give me an idea though.

User Name		Remember Me?
Password