Lightest Exhaust, Headers, and Front/Over/Mid Pipes?

[supramkivtt2jz]

btw, the stock exhaust system is 2.118" ID

http://www.importtuner.com/powerpage...s/viewall.html

[Captain Insano]

Invidia resonated midpipe (used on both the N1 and Q300): 8.6 lbs
Invidia catless resonated frontpipe: 7.2 lbs

[OICU812]

Here are some more weights for you Anthony

Avo Turbo world Ceramic Coated 2.5" overpipe =2.94 lbs

Avo Turbo World front pipe 2.5" with 5" high flow cat = 9.00 lbs

I suspect of course the non catted version front pipe would be much much lighter but this is certainly acceptable.

[8686]

Amuse single exit 8 lb

http://www.ft86club.com/forums/showp...37&postcount=4

[KyShro]

Originally Posted by 8686

Amuse single exit 8 lb

http://www.ft86club.com/forums/showp...37&postcount=4

OMG, wow! That's the first time Ive seen the Amuse single Ti

[FT86RGV]

I think I read somewhere that invidia uses 2.5" tubing for the q300 and N1. the 60mm is the inner diameter.

[Anthony]

Originally Posted by OICU812

Avo Turbo world Ceramic Coated 2.5" overpipe =2.94 lbs

Well, we have a new lightest over pipe! Although, only by 0.06lbs. And most people don't get that meticulous with their weights, so who knows what the actual numbers are in hundredths of pounds.

Originally Posted by 8686

Amuse single exit 8 lb

http://www.ft86club.com/forums/showp...37&postcount=4

Man, I can't see any of those photos at work. I'll have to look later though.

Originally Posted by FT86RGV

I think I read somewhere that invidia uses 2.5" tubing for the q300 and N1. the 60mm is the inner diameter.

Well if you find it again, let me know.

[FT86RGV]

Here they talk about it in post 13,14
http://www.ft86club.com/forums/showt...highlight=q300
and ft86speedfactory has it listed as 2.5" on their website
http://ft86speedfactory.com/invidia-...-tips-468.html

[Anthony]

Originally Posted by FT86RGV

Here they talk about it in post 13,14
http://www.ft86club.com/forums/showt...highlight=q300
and ft86speedfactory has it listed as 2.5" on their website
http://ft86speedfactory.com/invidia-...-tips-468.html

Gah, I hate this nonstandard ID/OD measurement system. I think everyone should only do ID, since piping thickness can vary. Inner diameter is what you're really worried about at the end of the day.

[Anthony]

Bump for new lightest exhaust and lightest front pipe. @BrianJC's terribly anorexic Amuse front pipe and catback. Review here.

[Captain Insano]

Originally Posted by Anthony

Gah, I hate this nonstandard ID/OD measurement system. I think everyone should only do ID, since piping thickness can vary. Inner diameter is what you're really worried about at the end of the day.

On this topic, are your first post measurements for diameter all inner diameter or outer diameter? I'm guessing the Invidia are ID.

BTW, the Invidia frontpipe and midpipe are also 2.5 OD and 2.36 ID.

[Anthony]

Originally Posted by Captain Insano

On this topic, are your first post measurements for diameter all inner diameter or outer diameter? I'm guessing the Invidia are ID.

BTW, the Invidia frontpipe and midpipe are also 2.5 OD and 2.36 ID.

They are mostly OD, as far as I know. Most places don't specify what the number is that they're giving you, so I figure it's usually OD.

That would explain the weird 2.36" number.

[Anthony]

Originally Posted by Captain Insano

On this topic, are your first post measurements for diameter all inner diameter or outer diameter? I'm guessing the Invidia are ID.

BTW, the Invidia frontpipe and midpipe are also 2.5 OD and 2.36 ID.

Do you have a source for those numbers? Seems like the exhausts would also be 2.5" OD.

[troek]

i really wish i would have weighted my j2 exhaust before i bolted it on, i know the dual tip is around 40 lbs minus the front pipe, but not the quad tip. anyone have those numbers?