Will this fit? (width, offset and tire size Qs)

[ill86]

Originally Posted by hanabie

Will 18x9 +42 265/35 hit the rear stock strut? Thanks.

It should not. I can measure in the AM if you like.

And yes, I would choose 245/35 over 245/40. The latter is too tall.

If staggering, 235/40 on 8" front, 265/35 on 9" rear
If square, 245/35 on 8"-9" front/rear

[TrogDor the Burninator]

Amazing thread ... Amazing help ... Amazing community

As a newb to the modifying scene, and a new FR-S owner, my question is as follows ...

I love TE37SLs ... but seems to be too many around and I'd like a bit of uniqueness to my new money sink and love, thus I'm wondering if these will fit and what would be the best tires for said combination:

Stock Suspension
Volk Racing G2 - 18x9 / 5x114.3 / Offset +50 on the front and rear
I'm guessing with 5 mm spacer on the rears?
235/35 or 245/35 rubber on all 4

Further question - with the 5mm spacer on the rear to push the wheel out, would I need a kit for the log bolts or would I have enough thread to handle the 5mm? This is a daily driver with tracking becoming more prevalent as mods are added.

Any input would be GREATLY appreciated!

[ill86]

@TrogDor the Burninator

^ Incorrect pcd. FR-S and BRZ are 5x100
Offset is a little high..

Please, if you haven't already, read this thread in its entirety ..

Welcome to the forums and world of modifying cars... :happy0180:

[ill86]

Originally Posted by Aydhayeth

Had a look at the wheel collection and do see slight variations of this theme running either 35 offset or 40.

Therefore your +33 and +38 will also "fit". as they are only <5mm difference.

[TrogDor the Burninator]

Originally Posted by ill86

@TrogDor the Burninator

^ Incorrect pcd. FR-S and BRZ are 5x100
Offset is a little high..

Please, if you haven't already, read this thread in its entirety ..

Welcome to the forums and world of modifying cars... :happy0180:

Ahhhhh ... many thanks ... the newb is definitely showing!

[Sportsguy83]

Originally Posted by ill86

@TrogDor the Burninator

^ Incorrect pcd. FR-S and BRZ are 5x100
Offset is a little high..

Please, if you haven't already, read this thread in its entirety ..

Welcome to the forums and world of modifying cars... :happy0180:

Car dropped 1" Tarmac Coilovers, 18X9 +40 wheels.

245/40 tire fits? I wanted 245/35, but the difference in price is BIG.

[OrbitalEllipses]

Originally Posted by Sportsguy83

Car dropped 1" Tarmac Coilovers, 18X9 +40 wheels.

245/40 tire fits? I wanted 245/35, but the difference in price is BIG.

That tire should be around .6" wider than the stock 215/45/17 tire. With that wheel and offset, you have 17mm less inner clearance, BUT the Tarmac coilovers are going to be skinnier than the stock struts/spring perch. Just go outside and measure your clearance now to figure out what 17mm would do.

[Sportsguy83]

Originally Posted by OrbitalEllipses

That tire should be around .6" wider than the stock 215/45/17 tire. With that wheel and offset, you have 17mm less inner clearance, BUT the Tarmac coilovers are going to be skinnier than the stock struts/spring perch. Just go outside and measure your clearance now to figure out what 17mm would do.

Ok, thanks for the advice.

[whitefrs]

Will this be good

18x9.5 et 30 all around

Front 225
Rear 245

[ill86]

Originally Posted by Sportsguy83

Car dropped 1" Tarmac Coilovers, 18X9 +40 wheels.

245/40 tire fits? I wanted 245/35, but the difference in price is BIG.

245/40 is noticeably taller.

Compare 245/35 and 245/40 from your preferred tire manufacturer. You will see the difference in height. If you are OK with that, cool. :-)


PS for anyone else reading, it is imperative you understand we re talking about 18" wheel/tire.

For 17" a 245/40 is excellent on an 8".

[ill86]

Originally Posted by whitefrs

Will this be good

18x9.5 et 30 all around

Front 225
Rear 245

No. But, if that's what you like don't let me stop you.

[dkrou351]

I have an Fr-S and was thinking about getting the XXR 18 in. wheels. I was wondering if it would be a dumb idea to go with the +20 offset in the back and the +35 offset in the front. I want a wider look for my rear wheels an a flush look for the fronts. I will also be lowering the car 1 - 1.5 inches. Would that work or not? Anyone know?

[2point0]

Originally Posted by dkrou351

I have an Fr-S and was thinking about getting the XXR 18 in. wheels. I was wondering if it would be a dumb idea to go with the +20 offset in the back and the +35 offset in the front. I want a wider look for my rear wheels an a flush look for the fronts. I will also be lowering the car 1 - 1.5 inches. Would that work or not? Anyone know?

Wheel width will determine if that offset is appropriate.

[dkrou351]

The wheel width will be 8.75 all around