Varis 2JZ Build - Page 20 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Apex-Apex · 02-28-2017, 11:42 AM

Quote:

Originally Posted by spitfire481

id2000's with m1's control drive amazing on ethanol, did it on my fa20 and the shop 2j frs is on them. even low rpm/high load is no issue so i wouldn't bother changing them out. I feel like both the 2000 and 1700 might still share some of the same low pulse width issues with 93 octane so it may not even be worth it. as far as ethanol sitting in them, i never ran 93 and all were still spotless inside. when we run c85 the seals internally do swell up and we replace and flow every season

Thanks for the insight! I ran the 2000 on my RX-7 but had some issues after 2 years but I did leave it sitting for an extended amount of time.

sqd · 03-01-2017, 02:22 AM

Quote:

Originally Posted by Apex-Apex

Thanks for the insight! I ran the 2000 on my RX-7 but had some issues after 2 years but I did leave it sitting for an extended amount of time.

Another +1 on the ID2000s. Had them in my SR20 S14 with 600whp on E85. Super easy to drive even at low RPMs, loved them. Combined with the Nismo twin plate, thing was not far from stock to drive, which is crazy seeing how those two things (huge injectors and multi-plate clutch) usually hurt driveability.

Apex-Apex · 03-01-2017, 11:41 AM

Quote:

Originally Posted by sqd

Another +1 on the ID2000s. Had them in my SR20 S14 with 600whp on E85. Super easy to drive even at low RPMs, loved them. Combined with the Nismo twin plate, thing was not far from stock to drive, which is crazy seeing how those two things (huge injectors and multi-plate clutch) usually hurt driveability.

Yeah definitely! Twin disc isn't as harsh as most people say they are.

DerHauptDigga · 03-01-2017, 12:14 PM

I see you're running 18x10 ZEs, and 265/35/18s. You look pretty tucked in the front and rear. What is your camber set to? Are you rubbing.

I have practically the same setup (except my tires are MPSS), and I would like to go lower, but I rub in the rear still at -2.2 camber, and the inner fender is "trimmed"...

JT.86 · 03-01-2017, 12:24 PM

Quote:

Originally Posted by DerHauptDigga

I see you're running 18x10 ZEs, and 265/35/18s. You look pretty tucked in the front and rear. What is your camber set to? Are you rubbing.

I have practically the same setup (except my tires are MPSS), and I would like to go lower, but I rub in the rear still at -2.2 camber, and the inner fender is "trimmed"...

What's your offset?

Sent from my ONEPLUS A3000 using Tapatalk

Apex-Apex · 03-01-2017, 12:40 PM

Quote:

Originally Posted by DerHauptDigga

I see you're running 18x10 ZEs, and 265/35/18s. You look pretty tucked in the front and rear. What is your camber set to? Are you rubbing.

I have practically the same setup (except my tires are MPSS), and I would like to go lower, but I rub in the rear still at -2.2 camber, and the inner fender is "trimmed"...

I have -4.x on the front and -3.x on the rear. I had to roll my rears and for the front, I just let the tires rub away on the fender liner.

forevergone · 03-06-2017, 09:19 PM

Nice rim choice!

Apex-Apex · 03-17-2017, 01:56 PM

Finally got the T56 Magnum in

DustinS · 03-17-2017, 02:04 PM

Nice!! Still waiting on mine... 4 months later... Really jealous.

Apex-Apex · 03-17-2017, 02:07 PM

Quote:

Originally Posted by DustinS

Nice!! Still waiting on mine... 4 months later... Really jealous.

Where did you order yours from?

ILLSMOQ · 03-17-2017, 04:55 PM

Nice! I orderd a magnum XL last week, from the same place as Dustin, Vorshlag...hopefully I don't have to wait 4 months.

Apex-Apex · 03-17-2017, 05:36 PM

Quote:

Originally Posted by ILLSMOQ

Nice! I orderd a magnum XL last week, from the same place as Dustin, Vorshlag...hopefully I don't have to wait 4 months.

ah nice! What made you decide to get an XL?

ILLSMOQ · 03-17-2017, 06:43 PM

Quote:

Originally Posted by Apex-Apex

ah nice! What made you decide to get an XL?

Apparently with an LS swap the magnum XL puts the shifter base perfectly in the factory position.

Apex-Apex · 03-17-2017, 08:08 PM

Quote:

Originally Posted by ILLSMOQ

Apparently with an LS swap the magnum XL puts the shifter base perfectly in the factory position.

Oh that makes sense.

03-01-2017, 12:14 PM	#270
DerHauptDigga Member Join Date: Jun 2014 Drives: 2016 FRS Location: Cincinnati, OH Posts: 54 Thanks: 7 Thanked 17 Times in 11 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I see you're running 18x10 ZEs, and 265/35/18s. You look pretty tucked in the front and rear. What is your camber set to? Are you rubbing. I have practically the same setup (except my tires are MPSS), and I would like to go lower, but I rub in the rear still at -2.2 camber, and the inner fender is "trimmed"... __________________ 2016 Ablaze FRS Build Thread: http://www.ft86club.com/forums/showthread.php?t=101985 Immer Not geil.

03-17-2017, 01:56 PM	#274
Apex-Apex Senior Member Join Date: Oct 2013 Drives: 2013 Scion FR-S Location: ONTARIO CA Posts: 650 Thanks: 208 Thanked 393 Times in 213 Posts Mentioned: 6 Post(s) Tagged: 2 Thread(s)	Finally got the T56 Magnum in __________________ Varis 2JZ Build Thread IG: @apexapexapex

03-17-2017, 02:04 PM	#275
DustinS Senior Member Join Date: Apr 2014 Drives: 2013 Ultramarine FR-S Location: Springfield, MO Posts: 1,950 Thanks: 2,539 Thanked 1,423 Times in 806 Posts Mentioned: 31 Post(s) Tagged: 3 Thread(s)	Nice!! Still waiting on mine... 4 months later... Really jealous. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Toyota GRMN 86 Concept is a Race Inspired FR-S for the Street	vh_supra26	Scion FR-S / Toyota 86 GT86 General Forum	12	05-07-2016 12:49 PM
Alucard's BRZ Build	alucard7755	Member's Car Journals	8	03-08-2016 02:18 PM
MINOCIN's FR-S Build, not because racecar, not because street car... just, because.	MINOCIN	Member's Car Journals	27	11-08-2015 11:02 PM
Street/Rally Build	z3ro	Member's Car Journals	3	06-07-2014 06:21 AM
C-Street BRZ 192 Build Info	Sccabrz192	Tracking / Autocross / HPDE / Drifting	20	04-26-2014 10:12 AM

03-06-2017, 09:19 PM	#273
forevergone Member Join Date: Mar 2017 Drives: FRS Location: TOronto Posts: 35 Thanks: 0 Thanked 9 Times in 9 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Nice rim choice!

03-17-2017, 04:55 PM	#277
ILLSMOQ Senior Member Join Date: Oct 2016 Drives: 2017 WR BLUE BRZ Location: San Jose Posts: 641 Thanks: 608 Thanked 502 Times in 249 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	Nice! I orderd a magnum XL last week, from the same place as Dustin, Vorshlag...hopefully I don't have to wait 4 months.

User Name		Remember Me?
Password