spacers

[mcnvgget]

anyone know what size spacer i could get a flush fit with 18x8.5’s? they tuck in a bit and since tein doesn’t go super low it looks a bit off i think


Sent from my iPhone using Tapatalk

[Leonardo]

Originally Posted by mcnvgget

anyone know what size spacer i could get a flush fit with 18x8.5’s? they tuck in a bit and since tein doesn’t go super low it looks a bit off i think


Sent from my iPhone using Tapatalk

I can help... What offset are your wheels? Do you know how much camber you are running?

[mcnvgget]

i’m running 18x8.5 +30 all around and no it’s camber from just lowering the car i haven’t messed with the camber plates in the front and haven’t done nothing to the rear, the front i have them maxed out lowered and the rear are about a quarter of an inch from maxed


Sent from my iPhone using Tapatalk

[Leonardo]

Originally Posted by mcnvgget

i’m running 18x8.5 +30 all around and no it’s camber from just lowering the car i haven’t messed with the camber plates in the front and haven’t done nothing to the rear, the front i have them maxed out lowered and the rear are about a quarter of an inch from maxed


Sent from my iPhone using Tapatalk

So, with your offset and estimated camber, Id suggest these... You will need extended studs to use these spacers. I'm running them and love them.

https://www.ebay.com/itm/4pcs-12mm-5...ox!97412!US!-1

You will have to add more front camber. There isnt a bolt on solution. (besides different wheels) Bolt on spacers, thin enough to work, would require shaving the OEM studs. zthe slip style spacer I have linked, requires longer studs. I have been running inexpensive Ebay studs for 30k miles, but everyone suggests ARP studs.