FS - FA20 long block (knocking) - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

protpibe · 08-19-2015, 03:31 PM

FA20 out of my 13 BRZ with 22,500km

Earlier in the year i had an over boost situation that caused the motor to knock. I picked up another long block and just swapped the motors. I intended to rebuild this one bit I've decided to stay with moderate power levels.

I have a video somewhere of the knock noise it was making prior to removal. There was no metal in the oil when I drained it. If I had to assume what was wrong I would say a bent rod, but I'm not guaranteeing that. This motor is being sold as is.

What you get:
Fuel injectors
Fuel ecu
Intake manifold
Alternator
Throttle body
Coils
Engine harness

What you don't get:
AC compressor
Starter
Manifold
Coolant lines running under the intake manifold (generic rubber hoses)

The motor is in Winnipeg right now but I work at a dealership and could arrange to have it shipped at my cost. I had trouble figuring out what this was worth, but ended up decided that I'm looking to get $2800cad plus shipping at my cost.

The core charges alone (block and heads) are $3500 U.S. (Almost 5k CAD) For a built motor. If you need any other additional parts (manifold, starter, etc) I have numerous spares and could include them at additional cost.

Name: ImageUploadedByTapatalk1440009113.354453.jpg
Views: 1497
Size: 485.1 KB

Name: ImageUploadedByTapatalk1440009113.354453.jpg
Views: 1497
Size: 485.1 KB

Attachment 118246

protpibe · 08-19-2015, 03:34 PM

Name: ImageUploadedByTapatalk1440009271.027330.jpg
Views: 1282
Size: 474.3 KB

protpibe · 12-15-2015, 07:50 PM

Want to build a motor? I need this thing gone so i can make room for my motor project!

$1200 CAD shipped anywhere in canada

SoCal80six · 12-15-2015, 09:18 PM

Quote:

Originally Posted by protpibe

FA20 out of my 13 BRZ with 22,500km

Earlier in the year i had an over boost situation that caused the motor to knock. I picked up another long block and just swapped the motors. I intended to rebuild this one bit I've decided to stay with moderate power levels.

I have a video somewhere of the knock noise it was making prior to removal. There was no metal in the oil when I drained it. If I had to assume what was wrong I would say a bent rod, but I'm not guaranteeing that. This motor is being sold as is.

What you get:
Fuel injectors
Fuel ecu
Intake manifold
Alternator
Throttle body
Coils
Engine harness

What you don't get:
AC compressor
Starter
Manifold
Coolant lines running under the intake manifold (generic rubber hoses)

The motor is in Winnipeg right now but I work at a dealership and could arrange to have it shipped at my cost. I had trouble figuring out what this was worth, but ended up decided that I'm looking to get $2800cad plus shipping at my cost.

The core charges alone (block and heads) are $3500 U.S. (Almost 5k CAD) For a built motor. If you need any other additional parts (manifold, starter, etc) I have numerous spares and could include them at additional cost.

Attachment 118245 Attachment 118246

Looking for another long block any ideas on were to find one? How much did you get yours for?

Sent from my SM-N920T using Tapatalk

protpibe · 12-15-2015, 09:19 PM

Quote:

Originally Posted by SoCal80six

Looking for another long block any ideas on were to find one? How much did you get yours for?

Sent from my SM-N920T using Tapatalk

I'm selling this one. This is the original motor from my car

SoCal80six · 12-15-2015, 09:20 PM

Quote:

Originally Posted by protpibe

I'm selling this one. This is the original motor from my car

What kind of damage is done to it seeing you went for another block?

Sent from my SM-N920T using Tapatalk

protpibe · 12-15-2015, 09:23 PM

Quote:

Originally Posted by SoCal80six

What kind of damage is done to it seeing you went for another block?

Sent from my SM-N920T using Tapatalk

I'm guessing it's a bent rod, given how it happened.

SoCal80six · 12-15-2015, 09:24 PM

Quote:

Originally Posted by protpibe

I'm guessing it's a bent rod, given how it happened.

Haven't stripped it down yet? How much did you find another block for?

Sent from my SM-N920T using Tapatalk

protpibe · 12-15-2015, 09:25 PM

Quote:

Originally Posted by SoCal80six

Haven't stripped it down yet? How much did you find another block for?

Sent from my SM-N920T using Tapatalk

I paid over 3k Canadian for a new long block

If this doesn't sell in the next day or two I'm going to strip it and part it out. The heads alone are worth what I'm selling the whole thing for

SoCal80six · 12-15-2015, 11:17 PM

Quote:

Originally Posted by protpibe

I paid 3k Canadian for a new long block

If this doesn't sell in the next day or two I'm going to strip it and part it out. The heads alone are worth what I'm selling the whole thing for

Once you strip it down let me know the damage looking for a new block to rebuild just blew mine a month ago.

Sent from my SM-N920T using Tapatalk

86Tony · 12-18-2015, 01:03 PM

2800 is alot for a pretty much blown motor

protpibe · 12-18-2015, 01:05 PM

Quote:

Originally Posted by 86Tony

2800 is alot for a pretty much blown motor

Did you scroll down?

mhiscott · 12-21-2015, 09:25 AM

You mentioned a video of it running could you dig that up and pm me?

Mike

protpibe · 02-25-2016, 04:47 PM

Engine has been stripped down and being parted out.

SOLD and not available:
Block
Crankshaft
Timing chain cover
1 cam position sensor
Cam solenoid
Passenger side head

Everything else is available. Will update with pics.

08-19-2015, 03:31 PM	#1
protpibe Senior Member Join Date: Oct 2013 Drives: 4-Runner Sport - 13' BRZ SportTech Location: Winnipeg Posts: 1,395 Thanks: 253 Thanked 839 Times in 459 Posts Mentioned: 18 Post(s) Tagged: 0 Thread(s)	FS - FA20 long block (knocking) FA20 out of my 13 BRZ with 22,500km Earlier in the year i had an over boost situation that caused the motor to knock. I picked up another long block and just swapped the motors. I intended to rebuild this one bit I've decided to stay with moderate power levels. I have a video somewhere of the knock noise it was making prior to removal. There was no metal in the oil when I drained it. If I had to assume what was wrong I would say a bent rod, but I'm not guaranteeing that. This motor is being sold as is. What you get: Fuel injectors Fuel ecu Intake manifold Alternator Throttle body Coils Engine harness What you don't get: AC compressor Starter Manifold Coolant lines running under the intake manifold (generic rubber hoses) The motor is in Winnipeg right now but I work at a dealership and could arrange to have it shipped at my cost. I had trouble figuring out what this was worth, but ended up decided that I'm looking to get $2800cad plus shipping at my cost. The core charges alone (block and heads) are $3500 U.S. (Almost 5k CAD) For a built motor. If you need any other additional parts (manifold, starter, etc) I have numerous spares and could include them at additional cost. Attachment 118246 __________________ Top Tier Imports - Check out my build journal HERE

08-19-2015, 03:34 PM	#2
protpibe Senior Member Join Date: Oct 2013 Drives: 4-Runner Sport - 13' BRZ SportTech Location: Winnipeg Posts: 1,395 Thanks: 253 Thanked 839 Times in 459 Posts Mentioned: 18 Post(s) Tagged: 0 Thread(s)	__________________ Top Tier Imports - Check out my build journal HERE

12-15-2015, 07:50 PM	#3
protpibe Senior Member Join Date: Oct 2013 Drives: 4-Runner Sport - 13' BRZ SportTech Location: Winnipeg Posts: 1,395 Thanks: 253 Thanked 839 Times in 459 Posts Mentioned: 18 Post(s) Tagged: 0 Thread(s)	Want to build a motor? I need this thing gone so i can make room for my motor project! $1200 CAD shipped anywhere in canada __________________ Top Tier Imports - Check out my build journal HERE

02-25-2016, 04:47 PM	#14
protpibe Senior Member Join Date: Oct 2013 Drives: 4-Runner Sport - 13' BRZ SportTech Location: Winnipeg Posts: 1,395 Thanks: 253 Thanked 839 Times in 459 Posts Mentioned: 18 Post(s) Tagged: 0 Thread(s)	Engine has been stripped down and being parted out. SOLD and not available: Block Crankshaft Timing chain cover 1 cam position sensor Cam solenoid Passenger side head Everything else is available. Will update with pics. __________________ Top Tier Imports - Check out my build journal HERE

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: FA20 Long Block/Short Block blown/running	The Racers Line	Engine, Exhaust, Bolt-Ons	7	07-29-2014 02:26 AM
WTB: FA20 Short Block or Blown Long Block	The Racers Line	Want-To-Buy Requests	1	06-29-2014 06:21 PM
FS: FA20 Long Block w/ Rod Knock	Dan@AWD	Engine, Exhaust, Bolt-Ons	16	06-12-2014 10:05 AM
FA20 Long Block and Port/Polish "Bare" Heads	Allaskew	Engine, Exhaust, Bolt-Ons	1	06-08-2014 01:48 AM
WTB: short block or long block	DOTman05	Engine, Exhaust, Bolt-Ons	2	07-14-2013 07:48 AM

12-18-2015, 01:03 PM	#11
86Tony Senior Member Join Date: Dec 2013 Drives: 2015 AOZORA EDITION Location: Markham, ON Posts: 477 Thanks: 63 Thanked 122 Times in 81 Posts Mentioned: 4 Post(s) Tagged: 1 Thread(s)	2800 is alot for a pretty much blown motor

12-21-2015, 09:25 AM	#13
mhiscott Senior Member Join Date: Dec 2013 Drives: 2013 FRS Location: NL, Canada Posts: 190 Thanks: 37 Thanked 39 Times in 29 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	You mentioned a video of it running could you dig that up and pm me? Mike

User Name		Remember Me?
Password