FS - FA20 long block (knocking)
 

FA20 out of my 13 BRZ with 22,500km

Earlier in the year i had an over boost situation that caused the motor to knock. I picked up another long block and just swapped the motors. I intended to rebuild this one bit I've decided to stay with moderate power levels.

I have a video somewhere of the knock noise it was making prior to removal. There was no metal in the oil when I drained it. If I had to assume what was wrong I would say a bent rod, but I'm not guaranteeing that. This motor is being sold as is.

What you get:
Fuel injectors
Fuel ecu
Intake manifold
Alternator
Throttle body
Coils
Engine harness

What you don't get:
AC compressor
Starter
Manifold
Coolant lines running under the intake manifold (generic rubber hoses)

The motor is in Winnipeg right now but I work at a dealership and could arrange to have it shipped at my cost. I had trouble figuring out what this was worth, but ended up decided that I'm looking to get $2800cad plus shipping at my cost.

The core charges alone (block and heads) are $3500 U.S. (Almost 5k CAD) For a built motor. If you need any other additional parts (manifold, starter, etc) I have numerous spares and could include them at additional cost.

Attachment 118245Attachment 118246

Want to build a motor? I need this thing gone so i can make room for my motor project!

$1200 CAD shipped anywhere in canada

Looking for another long block any ideas on were to find one? How much did you get yours for?

Sent from my SM-N920T using Tapatalk

I'm selling this one. This is the original motor from my car

What kind of damage is done to it seeing you went for another block?

Sent from my SM-N920T using Tapatalk

I'm guessing it's a bent rod, given how it happened.

Haven't stripped it down yet? How much did you find another block for?

Sent from my SM-N920T using Tapatalk

FS - FA20 long block (knocking)
 

I paid over 3k Canadian for a new long block

If this doesn't sell in the next day or two I'm going to strip it and part it out. The heads alone are worth what I'm selling the whole thing for

Once you strip it down let me know the damage looking for a new block to rebuild just blew mine a month ago.

Sent from my SM-N920T using Tapatalk

2800 is alot for a pretty much blown motor

Did you scroll down?

You mentioned a video of it running could you dig that up and pm me?

Mike

Engine has been stripped down and being parted out.

SOLD and not available:
Block
Crankshaft
Timing chain cover
1 cam position sensor
Cam solenoid
Passenger side head

Everything else is available. Will update with pics.