iPod issue?

[Mr.Jay]

Hey guys anyone having problems connecting their ipod up?

I plug mine in and it says ipod updating then goes ipod failed

it charges my ipod but does not connect with it I did a temp using a aux cable to make it work

any help would be great

[MVJ1975]

What model is yours? Zero problems with my 5th Gen Nano. Hooked right up with the USB cable. I didn't even need to use the Scoshe adapter I needed to use in the tC to get it to charge.

[Mr.Jay]

2nd gen touch

[MVJ1975]

Have you tried updating the device?

[Dadhawk]

Originally Posted by Mr.Jay

2nd gen touch

I have no problem with an iPod Classic. According to the manual, for a 2nd gen touch you have to have iOS3.0 or above. You may want to check that.

[5hairpins]

My nano which hasn't connected to iTunes in close to 2 years connected right up.

[Mr.Jay]

Ahh my iOS right now not iOS3.0 cause I didn't want to pay for any of the update as well as lose all my music (original itunes I synced it too is on a dead computer)

Guess I will have to update the itouch and try again. Thanks guys.

[Prava]

has anybody tried it on an iPhone? I ask purely because I wonder if there's any static or anything when it's plugged in...

[MVJ1975]

I haven't, but I'll test it for you this evening with my iPhone 4. I've been wanting to try the Bluetooth audio function out.

[Boosted2.0]

I have an iphone 4S and the Bespoke unit, and I have no issues with audio playback. No whine, no distortion or static. You do need to be careful however, because the round port in the Bespoke aux jack is actually a video feed from the iphone to the bespoke unit, not an aux audio jack like most of them.

[MVJ1975]

No worries with the standard head unit either, just tested it. BT audio is crisp and clear.

[meWant]

Originally Posted by Mr.Jay

Ahh my iOS right now not iOS3.0 cause I didn't want to pay for any of the update as well as lose all my music (original itunes I synced it too is on a dead computer)

Guess I will have to update the itouch and try again. Thanks guys.

if you need a place to get the 3.x or above firmware(s) i can help with that. Constantly jailbreaking devices too so found a site but it will help save a few $$ and is official firmware

PM for site.

[rikdrt1]

JAY, I have had the same issues for months. im looking around this forum to see if anyone has figured it out. nano-all updated sw - itouch alos - anything I plug in - its random but it basically plays but sometimes it locks up with an error that says - cant read device - no files found.. stupid crap... im sick of it really. dealer 4x and they wont replace because they cant recreate - im ready to throw some water on it and plug it back in.