If I were to part out..

[BRZPDX]

UPDATE 4

I am going to hold off parting out for now, looks like even a stock BRZ will be a tough sale in the winter/beginning of the year so I am going to decide this summer what to do. Sorry to get you guys all excited, but I decided to keep my BRZ for a bit longer, my wife won't even have the kid until April of 2016, so I didn't know why I panic'd so quickly. Sorry for getting you guys excited. If I do decide to part out, these prices will remain. And I will try to remember the "dibs" as much as I can.

UPDATE 3parts that are 100% pre-sold will be listed below now. The star is still on with people that are interested in the part, but I have no relationship with, so its a 50-50.

UPDATED 2 with possible buyers, the part out is planned on starting around Jan 13th. Putting a star next to what part is being negotiated with. They are not sold yet since the first one to give me the $$ will take the part. The number of stars will indicate how many people have inquired/interested in the part. Message me here or txt/call me at 503-544-8105.

UPDATED with price, sorry it took a while.

just for a feeler, will any of you guys be interested in my parts? I havn't finished my spreadsheet for all the prices, but expect about a 30%off retail price for most parts. Part list is: (some of these may be irrelevant, I just copied pasted from my craigslist ad)

I also have the Daily Fresh rear spoiler coming in sometime in January, I was lucky enough to be the first batch customer. - I'll let you guys know once it shows up. **

Turbo kit - Garrett GT3076, raceport BoV, TurboSmart 45mm waste gate, dump tube with supertrapp muffler, custom fabbed equal length header with overpipe, Garrett FMIC unit (350whp rating) electronic boost controller solenoid, AEM vent boost gauge.
$3000 *

Exterior:
VIS carbon fiber vented hood (with removable rain guards) - 450 SOLD
Custom blacked interior head lights - 40 + your OEM BRZ Head lights SOLD
STI carbon fiber front lip - 150 (has rivet holes and scuffs) *
Red Tom's genuine tail lights - 300 *
Carbon Fiber side skirts, paint matched - 200 (scratched and screwed in on side)
OEM rear diffuser - 100 *
Valenti side markers - 25 SOLD
Perrin shorty antenna - 10 SOLD

Suspension/wheels/brakes:
ST coilovers + Hotchikis camber plate (will only work in this pair due to rubber cone piece missing) - 600 + your stock struts SOLD
SPL full titanium adjustable rear control arm (currently at -3.5 camber, up to -6 achievable) - 350 SOLD
Rays 57xtreme, satin black/emerald green pearl. 18x8.5 F 18x9.5 R
Bridgestone Potenza RE11 tires, 225/40/18 F 255/35/18 R, used for 4k miles - 1200 + your stocks ***
Winmax W2 brake pad, used for 4k miles - F & R set only, $120 SOLD

Engine/Exhaust:
Perrin 2.75in CAI (brand new) + red silicone inlet tube - 100 SOLD
Perrin light weight crank pulley - (red) 50 SOLD
Perrin 2.5in resonated cat back exhaust - 350 + your stock exhaust SOLD
Invidia front pipe with custom fabricated resonator - 100 SOLD
Custom Turbo kit (see above for detail) - 3000 *
Tomioka Oil Cooler - (one mounting bracket portion cracked and bent) 300 *
Nameless performance blue engine cover - 30 SOLD

Misc./interior:
Scangauge II for checking oil temp/IAT/AFR/Coolant temp - Already has AFR programmed in, 100 SOLD
Boost gauge in ac/heater vent for clean/stealth look - 100 SOLD
Genuine STI rear emblem - if I can take it off without breaking 20
Genuine STI shift knob - 120
Genuine STI keyless push start button - 150 *
Genuine STI front emblem kit (not installed yet) - 30

[Chen]

interested in rays and df trunk!

[sachu]

would be interested in the Rays wheels and catback

[RobertPaulson]

i'd be interested in the oil cooler.

[Jonesy86]

Interested in the scangauge and boost gauge and hood.

[BRZPDX]

updated the TC kit, it does come with a Garrett FMIC. It'll probably be the easiest to do the swap at PRE from my car to your car, and get yours tuned. Erich's tune runs very smooth, and it drives better than when it was Bobby's tune. Always gives me updates as well.

Currently I'm asking them if my kit will fit a MT car, since my car is AT and clearance maybe slightly different.

[Decay107]

Definitely those SPL arms

[thehapaone]

I'll take the hood, lcas, rays, blacked out headlights and anything else not on my car already aside from the turbo

[DAEMANO]

I'd be interested in your WinMax W2 for the right price shipped to 92704

[Decay107]

Originally Posted by thehapaone

I'll take the hood, lcas, rays, blacked out headlights and anything else not on my car already aside from the turbo

Fisticuffs for the SPL arms?

[raven1231]

Interested in turbo kit

[aaguilar3]

Interested in smoked side markers

[BRZPDX]

Wow this is turning out better than I thought.. I'll get those price sheet up tonight! Thanks for the support guys.

[Jonesy86]

I might even be interested in the daily fresh spoiler!