Tomei 80 and DSS aluminum drivwshat ??? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

JHarperFRS · 03-18-2014, 06:19 AM

I have searched on here and looked on Google...I want to know if anyone is running the Drive Shaft Shop aluminum drive shaft and a Tomei 80. I need to know, if the Tomei 80 will fit, with the drive shaft and if so, how's the clearance ? If you have this setup or have seen photos of the setup... I'd really like to see some pictures, showing the clearance... I am wanting to buy the Tomei 80 ASAP,and already have the drive shaft installed....Thanks.

midnight23 · 03-18-2014, 06:40 AM

http://www.ft86club.com/forums/showthread.php?t=59392

[ame="http://www.youtube.com/watch?v=Y-BnxIL4jA0"]FT-86 SpeedFactory DriveShaft Shop Carbon Driveshaft Install - DIY - FRS / BRZ - YouTube[/ame]

Carbon drive shaft but should be the same size or around the same as the aluminum...pretty sure they run the 80 @FT-86 SpeedFactory

JHarperFRS · 03-18-2014, 09:46 AM

Thanks, but I've seen that video before. The aluminum is quite larger than the carbon fiber one. I've been told it should fit, but I just want to make damn sure it does and still have enough clearance, before I buy a Tomei 80.

I ordered this exhaust, any how..

Malt · 03-18-2014, 11:33 AM

Quote:

Originally Posted by JHarperFRS

Thanks, but I've seen that video before. The aluminum is quite larger than the carbon fiber one. I've been told it should fit, but I just want to make damn sure it does and still have enough clearance, before I buy a Tomei 80.

I ordered this exhaust, any how...Mods please delete this entire thread....Thanks

The aluminum driveshaft is only 0.25" larger in diameter than the carbon driveshaft. Not sure on the diameter of the tomei 80 but the aluminum driveshaft fits just fine with the perrin 3" resonated exhaust if that helps any.

FT-86 SpeedFactory · 03-18-2014, 11:41 AM

It will fit just fine.

Promise, and we'll back it up with no return fee's or etc if ordered from us, but I know it fits.

JHarperFRS · 03-18-2014, 11:42 AM

Quote:

Originally Posted by Malt

The aluminum driveshaft is only 0.25" larger in diameter than the carbon driveshaft. Not sure on the diameter of the tomei 80 but the aluminum driveshaft fits just fine with the perrin 3" resonated exhaust if that helps any.

Thanks...I ordered the Tomei 80. I can't hardly wait for its arrival.

JHarperFRS · 03-18-2014, 11:49 AM

Quote:

Originally Posted by FT-86 SpeedFactory

It will fit just fine.

Promise, and we'll back it up with no return fee's or etc if ordered from us, but I know it fits.

Order already confirmed # 5269

Thanks, for the reassurance... and thanks for your customer service. IMHO you guys are the best frs/brz parts vendor, in the business. I have ordered all my products, for my FRS from ya'll and will continue to do so, in the future.

xsuperbeex · 03-19-2014, 12:46 AM

Quote:

Originally Posted by FT-86 SpeedFactory

It will fit just fine.

Promise, and we'll back it up with no return fee's or etc if ordered from us, but I know it fits.

is this valid for international buyer

lol

03-18-2014, 06:19 AM	#1
JHarperFRS Member Join Date: Sep 2013 Drives: 2013 Scion FR-S "White Out" Location: Dothan Posts: 69 Thanks: 25 Thanked 19 Times in 15 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Tomei 80 and DSS aluminum drivwshat ??? I have searched on here and looked on Google...I want to know if anyone is running the Drive Shaft Shop aluminum drive shaft and a Tomei 80. I need to know, if the Tomei 80 will fit, with the drive shaft and if so, how's the clearance ? If you have this setup or have seen photos of the setup... I'd really like to see some pictures, showing the clearance... I am wanting to buy the Tomei 80 ASAP,and already have the drive shaft installed....Thanks.

03-18-2014, 06:40 AM	#2
midnight23 dying bird under the hood Join Date: Mar 2013 Drives: 2013 SWP Limited BRZ Location: Disneyland, California Posts: 1,331 Thanks: 546 Thanked 451 Times in 295 Posts Mentioned: 34 Post(s) Tagged: 0 Thread(s)	http://www.ft86club.com/forums/showthread.php?t=59392 [ame="http://www.youtube.com/watch?v=Y-BnxIL4jA0"]FT-86 SpeedFactory DriveShaft Shop Carbon Driveshaft Install - DIY - FRS / BRZ - YouTube[/ame] Carbon drive shaft but should be the same size or around the same as the aluminum...pretty sure they run the 80 @FT-86 SpeedFactory __________________ GReddy Turbo BRZ tuned by Evasive Motorsports Build Thread Instagram

03-18-2014, 09:46 AM	#3
JHarperFRS Member Join Date: Sep 2013 Drives: 2013 Scion FR-S "White Out" Location: Dothan Posts: 69 Thanks: 25 Thanked 19 Times in 15 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Thanks, but I've seen that video before. The aluminum is quite larger than the carbon fiber one. I've been told it should fit, but I just want to make damn sure it does and still have enough clearance, before I buy a Tomei 80. I ordered this exhaust, any how.. Last edited by JHarperFRS; 03-18-2014 at 11:45 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Is Tomei 60s Really this loud??	leech	Engine, Exhaust, Transmission	50	02-14-2022 07:22 PM
WTB tomei type 80	andrew5826	Want-To-Buy Requests	1	01-21-2014 12:11 AM
Tomei Exhaust with Tomei Straight Pipe	leech	Engine, Exhaust, Transmission	10	01-07-2014 11:42 AM
Tomei 60s installed!!	brn12345	Engine, Exhaust, Transmission	13	10-28-2013 05:29 PM
Tomei 2-Way LSD	BPAuto	Engine, Exhaust, Transmission	0	07-20-2012 03:15 PM

03-18-2014, 11:41 AM	#5
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,579 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	It will fit just fine. Promise, and we'll back it up with no return fee's or etc if ordered from us, but I know it fits.

User Name		Remember Me?
Password