seibon 10mm front fender. anyone have it? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

ft86me · 11-30-2013, 01:34 PM

So i've looked at quite a few fenders such as the DF which seems like it isn't being made, but may be made after production of their wing. Also looked at todoroki which looks absolutely amazing, but i don't think I need a whoppin 30mm wider fender up front unless i got some fairly large spacers on my upcoming 18x10 setup. Lastly, there is the seibon carbon front 10mm wide fender. I think that may be more suitable.

Does anyone have these installed on their car? I'd like to see how they look. Even better if painted. I searched on Google for images, but got a few pics from ft86speedfactory but I'm looking for pics from farther back and up front.

6-Shift · 12-01-2013, 07:20 PM

In for results.

jshadeck · 12-01-2013, 09:56 PM

18x10 rims up front? Ull probably want the 30mm.. Thats just over 1", and my 9.5" +38 poke enough that im deciding between the 30mm fenders or 8.5" rims in spring..

ft86me · 12-01-2013, 09:59 PM

Quote:

Originally Posted by jshadeck

18x10 rims up front? Ull probably want the 30mm.. Thats just over 1", and my 9.5" +38 poke enough that im deciding between the 30mm fenders or 8.5" rims in spring..

I love how my car looks right now with the 18 9.5 +38 they poke in a tasteful way but just not sure if 18x10 +44 will look good with big ok fenders. It's almost the same poke though between the two. Trying to avoid using spacers but I don't want to drop a grand and then see that I got a nasty gap.

Sent from my iPhone using Tapatalk

OmarGC · 12-01-2013, 10:41 PM

Quote:

Originally Posted by jshadeck

18x10 rims up front? Ull probably want the 30mm.. Thats just over 1", and my 9.5" +38 poke enough that im deciding between the 30mm fenders or 8.5" rims in spring..

You're doing it wrong. My 18x10 +38s are flush(not poking). Only running -1.5 camber up front. Our front fenders handle rolling/pulling very well. I have more wheel/tire clearance up front then I do in the rear. Currently on 245s, but have room to go 255, and most 265s.

I was looking at the Seibon +10mm fenders until I realized how much clearance you can gain from the stock fenders without making em look molested at all. Wish I would've measured, but I gained close to 10mm if not 10+.

ft86me · 12-01-2013, 10:45 PM

Quote:

Originally Posted by OmarGC

You're doing it wrong. My 18x10 +38s are flush(not poking). Only running -1.5 camber up front. Our front fenders handle rolling/pulling very well. I have more wheel/tire clearance up front then I do in the rear. Currently on 245s, but have room to go 255, and most 265s.

I was looking at the Seibon +10mm fenders until I realized how much clearance you can gain from the stock fenders without making em look molested at all. Wish I would've measured, but I gained close to 10mm if not 10+.

I wanted to do this for aesthetics because I like the wide look but don't want to cut the fenders etc. Hence why I looked at seibon and the +30mm. I have no issues w 18x9.5 +38 and sure I won't have issues with the x10 +44. Just wondering how the fenders will look without spacers.

Sent from my iPhone using Tapatalk

FT-86 SpeedFactory · 12-01-2013, 10:52 PM

Honestly not very many people have these. Photos of them in the wild are going to be almost impossible to find. We've seen them in person on a car and they look great. Even thought about getting them for our silver car but will probably go with RB fenders instead.

ft86me · 12-01-2013, 10:55 PM

Quote:

Originally Posted by FT-86 SpeedFactory

Honestly not very many people have these. Photos of them in the wild are going to be almost impossible to find. We've seen them in person on a car and they look great. Even thought about getting them for our silver car but will probably go with RB fenders instead.

I just can't handle my fenders getting cut haha. Well I guess I'll just stick w my oe fenders. I rather not run spacers to fill the gap of a 30mm extended fender.

Sent from my iPhone using Tapatalk

OmarGC · 12-01-2013, 11:22 PM

Quote:

Originally Posted by ft86me

I just can't handle my fenders getting cut haha. Well I guess I'll just stick w my oe fenders. I rather not run spacers to fill the gap of a 30mm extended fender.

Sent from my iPhone using Tapatalk

Way I look at it is, I can fit a 275 under the stock body(slightly trimmed/pulled) then I have zero need for over fenders, ever.

ft86me · 12-01-2013, 11:27 PM

Quote:

Originally Posted by OmarGC

Way I look at it is, I can fit a 275 under the stock body(slightly trimmed/pulled) then I have zero need for over fenders, ever.

Again, this was for aesthetics not because I can't fit a wheel with tires. I just wanted to know what it would look like without spacers so that's why I asked if anyone out there had input. As I said before , the wheels I have no fit

Sent from my iPhone using Tapatalk

GH05T · 12-01-2013, 11:31 PM

This guy has it:

http://www.ft86club.com/forums/showt...=seibon+fender

ft86me · 12-01-2013, 11:32 PM

Quote:

Originally Posted by GH05T

This guy has it:

http://www.ft86club.com/forums/showt...=seibon+fender

Thank you! That's what im lookin for ! appreciate it

Sent from my iPhone using Tapatalk

11-30-2013, 01:34 PM	#1
ft86me Senior Member Join Date: Feb 2013 Drives: 2013 FRS Location: Endor Posts: 1,231 Thanks: 802 Thanked 349 Times in 212 Posts Mentioned: 60 Post(s) Tagged: 1 Thread(s)	seibon 10mm front fender. anyone have it? So i've looked at quite a few fenders such as the DF which seems like it isn't being made, but may be made after production of their wing. Also looked at todoroki which looks absolutely amazing, but i don't think I need a whoppin 30mm wider fender up front unless i got some fairly large spacers on my upcoming 18x10 setup. Lastly, there is the seibon carbon front 10mm wide fender. I think that may be more suitable. Does anyone have these installed on their car? I'd like to see how they look. Even better if painted. I searched on Google for images, but got a few pics from ft86speedfactory but I'm looking for pics from farther back and up front.

12-01-2013, 09:56 PM	#3
jshadeck Senior Member Join Date: Nov 2012 Drives: 2013 Scion FR-S Whiteout 6MT Location: carlisle, pa Posts: 773 Thanks: 3 Thanked 221 Times in 163 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	18x10 rims up front? Ull probably want the 30mm.. Thats just over 1", and my 9.5" +38 poke enough that im deciding between the 30mm fenders or 8.5" rims in spring.. __________________

12-01-2013, 11:31 PM	#11
GH05T Undercover Batman Join Date: Jan 2013 Drives: 2013 Subaru BRZ Limited Location: Jersey City, NJ Posts: 567 Thanks: 120 Thanked 219 Times in 128 Posts Mentioned: 18 Post(s) Tagged: 0 Thread(s)	This guy has it: http://www.ft86club.com/forums/showt...=seibon+fender __________________ *"He who shall be last, shall be sideways and smiling." - Jeremy Clarkson*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TRD Front Fender Aero Fin	Beyer Subaru	Cosmetic Modification (Interior/Exterior/Lighting)	60	07-13-2014 11:28 AM
FS: brand new Seibon carbon fiber fender vents (SF east bay)	serial gixxer	Exterior Parts (Aero, Lighting, Etc.)	17	07-20-2013 01:26 PM
Options for front fenders? Seibon owners please comment	Acree	Cosmetic Modification (Interior/Exterior/Lighting)	0	07-20-2013 03:30 AM
Seibon BRZ TB-style front lip - anyone have one (or even a photo)?	shiumai	Cosmetic Modification (Interior/Exterior/Lighting)	5	05-30-2013 03:39 AM
FS: Brand New Seibon Carbon Fiber Fender 10mm	Pekingduck	Exterior Parts (Aero, Lighting, Etc.)	1	04-22-2013 10:08 AM

12-01-2013, 10:52 PM	#7
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,579 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	Honestly not very many people have these. Photos of them in the wild are going to be almost impossible to find. We've seen them in person on a car and they look great. Even thought about getting them for our silver car but will probably go with RB fenders instead.

User Name		Remember Me?
Password