seibon 10mm front fender. anyone have it?
 

So i've looked at quite a few fenders such as the DF which seems like it isn't being made, but may be made after production of their wing. Also looked at todoroki which looks absolutely amazing, but i don't think I need a whoppin 30mm wider fender up front unless i got some fairly large spacers on my upcoming 18x10 setup. Lastly, there is the seibon carbon front 10mm wide fender. I think that may be more suitable.

Does anyone have these installed on their car? I'd like to see how they look. Even better if painted. I searched on Google for images, but got a few pics from ft86speedfactory but I'm looking for pics from farther back and up front.

In for results.

18x10 rims up front? Ull probably want the 30mm.. Thats just over 1", and my 9.5" +38 poke enough that im deciding between the 30mm fenders or 8.5" rims in spring..

I love how my car looks right now with the 18 9.5 +38 they poke in a tasteful way but just not sure if 18x10 +44 will look good with big ok fenders. It's almost the same poke though between the two. Trying to avoid using spacers but I don't want to drop a grand and then see that I got a nasty gap.


Sent from my iPhone using Tapatalk

You're doing it wrong. My 18x10 +38s are flush(not poking). Only running -1.5 camber up front. Our front fenders handle rolling/pulling very well. I have more wheel/tire clearance up front then I do in the rear. Currently on 245s, but have room to go 255, and most 265s.

I was looking at the Seibon +10mm fenders until I realized how much clearance you can gain from the stock fenders without making em look molested at all. Wish I would've measured, but I gained close to 10mm if not 10+.

I wanted to do this for aesthetics because I like the wide look but don't want to cut the fenders etc. Hence why I looked at seibon and the +30mm. I have no issues w 18x9.5 +38 and sure I won't have issues with the x10 +44. Just wondering how the fenders will look without spacers.


Sent from my iPhone using Tapatalk

Honestly not very many people have these. Photos of them in the wild are going to be almost impossible to find. We've seen them in person on a car and they look great. Even thought about getting them for our silver car but will probably go with RB fenders instead.

I just can't handle my fenders getting cut haha. Well I guess I'll just stick w my oe fenders. I rather not run spacers to fill the gap of a 30mm extended fender.


Sent from my iPhone using Tapatalk

Way I look at it is, I can fit a 275 under the stock body(slightly trimmed/pulled) then I have zero need for over fenders, ever.

Again, this was for aesthetics not because I can't fit a wheel with tires. I just wanted to know what it would look like without spacers so that's why I asked if anyone out there had input. As I said before , the wheels I have no fit

Sent from my iPhone using Tapatalk

This guy has it:

http://www.ft86club.com/forums/showt...=seibon+fender

Thank you! That's what im lookin for ! appreciate it


Sent from my iPhone using Tapatalk