TRL/TC Design 4-Point Roll Cage Group Buy - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

The Racers Line · 03-28-2016, 02:22 PM

Hello Everyone!

I have just setup a rare opportunity with TC Design. They almost never set up any sort of group-buy's because of the kind of work they perform. The group-buy is for a minimum of 5 fully welded in 4-Point roll cages with harness bars. These are the highest quality cages, and down the road can even be converted to a full 6-Point + with door bars without needing to remove the original 4-point.

If you haven't heard of TC Design, they are quite well known for their motorsports background and fab work.

Requirements:

-All cars have to go to TC Design at the same time
-All the cages will be painted black for free ($200 savings)
-All cages will be built to the same spec
-Interior must be removed before hand (this is something I will be offering out of my shop, at no extra cost)

Lead time is 1 month for scheduling, then TC estimates 2 weeks for total completion, so cars can be picked up as they are finished(average time per build is 2-3 days). We can make sure to schedule it so the people that need their cars the soonest will get first in line of production. I am fine leaving my car until very last.

Cost:

Price for the cage is $1500 out the door

List of Interested:
1. @The Racers Line
2. @byun
3. @xero404
4. @WoOosOn
5.

Here are some pictures of the mounting(many thanks to Tony Cassell)

kster1 · 03-28-2016, 02:58 PM

Very temping. Do you have any more pictures of the 4pt roll bar?

Is the seat & harness install price also reduced at this time?

Also, I'm assuming we can choose to get a seat and harness at a later date. Will the roll bar preclude us from fitting any particular seat? (I'm assuming no)

sw20kosh · 03-28-2016, 03:27 PM

Hmmmm!!! @RehabJeff86

WoOosOn · 03-28-2016, 04:14 PM

count me in!

The Racers Line · 03-28-2016, 04:32 PM

Quote:

Originally Posted by kster1

Very temping. Do you have any more pictures of the 4pt roll bar?

Is the seat & harness install price also reduced at this time?

Also, I'm assuming we can choose to get a seat and harness at a later date. Will the roll bar preclude us from fitting any particular seat? (I'm assuming no)

I'll see if I can bug Tony for a couple more pictures!

Seat and Harness install price will be GREATLY reduced at the time of the cage install.

You can keep the stock seat with this cage no problem. So if you wanted to wait a bit before settling on a new fixed back seat set-up, that would be no problem. The rollbar allows for fitting just about any seat you can find, as the hoop and supports are mounted to the rear seat platform vs. the floor. (safer as well)

The Racers Line · 04-09-2016, 01:18 PM

Just need 1 more! But can have more then 5
@RehabJeff86 and @sw20kosh you guys interested?

MyRx · 04-09-2016, 02:31 PM

I've seen this in Tony's car and it is a nice setup! Great GB price too!! I'd jump on this if the car wasn't already committed in a different direction.

Kaotic Lazagna · 04-09-2016, 05:29 PM

Would be nice/cool to have, but completely pointless for my use. Haha.

BigFatFlip · 04-09-2016, 06:00 PM

In a different life, I'd be all over this...

The Racers Line · 04-14-2016, 01:25 AM

Some pictures of Tony's cage!

EAGLE5 · 04-14-2016, 02:45 AM

TC work looks great. Do want. Not gonna happen.

exE36M3 · 04-15-2016, 11:55 PM

FWIW, I've known Tony an easy 20 years via the BMW Club. He's done a ZILLION BMW Club racecars. As a side note, see if you can catch him driving, the guy puts a lot of pros to shame too.

(I did the flaming helmet logo for his shop BTW)

Sapphireho · 05-01-2016, 06:19 PM

Is this the little shop in Campbell? Do you have to have the headliner out? I'm tempted if I could customize my rear seat delete to make it look nice for a street car.

The Racers Line · 05-20-2016, 02:21 AM

Quote:

Originally Posted by Sapphireho

Is this the little shop in Campbell? Do you have to have the headliner out? I'm tempted if I could customize my rear seat delete to make it look nice for a street car.

Big shop in Campell, but yes! Sorry I didn't see this.

For this group buy, all the cars need to be the same. We'll likely have to remove the headliner, as it puts the cage hoop at the highest point for safety.

03-28-2016, 02:22 PM	#1
The Racers Line Join Date: Apr 2013 Drives: FRS, Supra, Colorado D, GLC63 Location: Concord, CA Posts: 1,025 Thanks: 752 Thanked 1,515 Times in 532 Posts Mentioned: 112 Post(s) Tagged: 3 Thread(s)	TRL/TC Design 4-Point Roll Cage Group Buy Hello Everyone! I have just setup a rare opportunity with TC Design. They almost never set up any sort of group-buy's because of the kind of work they perform. The group-buy is for a minimum of 5 fully welded in 4-Point roll cages with harness bars. These are the highest quality cages, and down the road can even be converted to a full 6-Point + with door bars without needing to remove the original 4-point. If you haven't heard of TC Design, they are quite well known for their motorsports background and fab work. Requirements: -All cars have to go to TC Design at the same time -All the cages will be painted black for free ($200 savings) -All cages will be built to the same spec -Interior must be removed before hand (this is something I will be offering out of my shop, at no extra cost) Lead time is 1 month for scheduling, then TC estimates 2 weeks for total completion, so cars can be picked up as they are finished(average time per build is 2-3 days). We can make sure to schedule it so the people that need their cars the soonest will get first in line of production. I am fine leaving my car until very last. Cost: Price for the cage is $1500 out the door List of Interested: 1. @The Racers Line 2. @byun 3. @xero404 4. @WoOosOn 5. Here are some pictures of the mounting(many thanks to Tony Cassell) Last edited by The Racers Line; 03-29-2016 at 01:15 PM.

03-28-2016, 03:27 PM	#3
sw20kosh Senior Member Join Date: Jul 2012 Drives: 2013 Black FR-S Location: SF Posts: 3,030 Thanks: 881 Thanked 2,014 Times in 990 Posts Mentioned: 153 Post(s) Tagged: 1 Thread(s)	Hmmmm!!! @RehabJeff86 __________________ 86DRIVE Challenge

04-09-2016, 02:31 PM	#7
MyRx Senior Member Join Date: Nov 2012 Drives: Flight 86 is now boarding. Location: CA Posts: 1,759 Thanks: 1,842 Thanked 1,502 Times in 700 Posts Mentioned: 230 Post(s) Tagged: 1 Thread(s)	I've seen this in Tony's car and it is a nice setup! Great GB price too!! I'd jump on this if the car wasn't already committed in a different direction. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Roll cage for a DD?	Yamajee	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	42	08-10-2018 11:27 PM
Show us your Custom Roll Cage or Roll Bar and Harness Setup	Black Tire	Tracking / Autocross / HPDE / Drifting	27	02-13-2015 10:59 PM
Roll cage	(Stealth Inc.)	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	37	12-16-2013 12:51 PM
AE Performance Roll Cage Group Buy	Juan@aePerformance	Groupbuys	5	08-28-2012 09:23 PM
Technical - Sorta: Roll cage design	Dave-ROR	Tracking / Autocross / HPDE / Drifting	4	08-12-2012 07:48 PM

03-28-2016, 02:58 PM	#2
kster1 Senior Member Join Date: Dec 2012 Drives: 2013 BRZ Location: Fremont, CA Posts: 316 Thanks: 229 Thanked 212 Times in 121 Posts Mentioned: 16 Post(s) Tagged: 1 Thread(s)	Very temping. Do you have any more pictures of the 4pt roll bar? Is the seat & harness install price also reduced at this time? Also, I'm assuming we can choose to get a seat and harness at a later date. Will the roll bar preclude us from fitting any particular seat? (I'm assuming no)

03-28-2016, 04:14 PM	#4
WoOosOn Senior Member Join Date: Sep 2013 Drives: S2000 AP1, BRZ SWP Location: SF Bay Area Posts: 160 Thanks: 463 Thanked 93 Times in 52 Posts Mentioned: 52 Post(s) Tagged: 0 Thread(s)	count me in!

04-09-2016, 01:18 PM	#6
The Racers Line Join Date: Apr 2013 Drives: FRS, Supra, Colorado D, GLC63 Location: Concord, CA Posts: 1,025 Thanks: 752 Thanked 1,515 Times in 532 Posts Mentioned: 112 Post(s) Tagged: 3 Thread(s)	Just need 1 more! But can have more then 5 @RehabJeff86 and @sw20kosh you guys interested?

04-09-2016, 05:29 PM	#8
Kaotic Lazagna Senior Member Join Date: Apr 2014 Drives: GR Corolla Location: Lathrop, CA Posts: 4,943 Thanks: 3,096 Thanked 3,028 Times in 1,865 Posts Mentioned: 40 Post(s) Tagged: 2 Thread(s)	Would be nice/cool to have, but completely pointless for my use. Haha.

04-09-2016, 06:00 PM	#9
BigFatFlip sleep, drive, eat, repeat Join Date: Mar 2012 Drives: '13 BRZ, '12 Outback Location: Sack of Potatoes Posts: 4,431 Thanks: 2,630 Thanked 3,797 Times in 1,981 Posts Mentioned: 188 Post(s) Tagged: 4 Thread(s)	In a different life, I'd be all over this...

04-14-2016, 01:25 AM	#10
The Racers Line Join Date: Apr 2013 Drives: FRS, Supra, Colorado D, GLC63 Location: Concord, CA Posts: 1,025 Thanks: 752 Thanked 1,515 Times in 532 Posts Mentioned: 112 Post(s) Tagged: 3 Thread(s)	Some pictures of Tony's cage!

04-15-2016, 11:55 PM	#12
exE36M3 Senior Member Join Date: Mar 2014 Drives: 2013 BRZ Location: NorCal Posts: 331 Thanks: 165 Thanked 173 Times in 93 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	FWIW, I've known Tony an easy 20 years via the BMW Club. He's done a ZILLION BMW Club racecars. As a side note, see if you can catch him driving, the guy puts a lot of pros to shame too. (I did the flaming helmet logo for his shop BTW)

05-01-2016, 06:19 PM	#13
Sapphireho Famous Potatoes Join Date: Mar 2016 Drives: '15 ultramarine Location: Idaho Posts: 14,000 Thanks: 5,796 Thanked 19,557 Times in 9,206 Posts Mentioned: 162 Post(s) Tagged: 0 Thread(s)	Is this the little shop in Campbell? Do you have to have the headliner out? I'm tempted if I could customize my rear seat delete to make it look nice for a street car.

User Name		Remember Me?
Password