Dash Command App and Oil Temp on iPhone and iPad - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

nzer · 04-20-2013, 12:22 AM

As many of you will know you cannot currently add the oil temp PID for the twins to Dash Command to get oil temp to show on an iPad or iPhone.

Best option at the moment is to use Torque on an Android. Not good for iOS users.

If you use an iPhone or iPad and want to be able to see oil temp gauge using dash command PLEASE go to the developers Dash Commnd forum and add you voice to the request thread here.

http://www.palmerperformance.com/for...pic=6351.0;all

They are looking at adding Toyota/Subaru specific sets of data but also other makes. The more of us that request either being able to add specific PIDs or a Toyota/Subaru set the more likely we get to the front of the queue for development.

Also a good idea to write an app review of Dash Command and tell them you have voted it down due to no oil temp for the 86 or BRZ.

Let's get the FT86 Club to put the pressure on their development team! 86ers are go!

.

sw20kosh · 06-11-2013, 04:00 AM

Thanks for this!

dssence · 02-02-2014, 08:16 PM

Hey I'm looking to a way to interface the FRS with android , I have the stock stereo, hows that possible, I want to have more information from the ecu on my tablet which is runnin android. Any ideas?

nzer · 02-03-2014, 03:09 AM

Quote:

Originally Posted by dssence

Hey I'm looking to a way to interface the FRS with android , I have the stock stereo, hows that possible, I want to have more information from the ecu on my tablet which is runnin android. Any ideas?

Get a Bluetooth ELM327 from ebay I plug not your cars OBD2 connector and the Torque app for android. All up cost less than $20.

Won't show on your head unit but will show n your tablet assuming your tablet gas Bluetooth.

Have a search for torque app or ELM327 on this forum. Heaps of threads about it.

nlowell · 03-15-2014, 03:32 AM

Time to wake up this thread - the updated version of Dash Command has been submitted to the app store with FT86 PIDs including oil temp and is awaiting Apple's approval! The update was submitted early this week so it should be approved by early next week.

http://www.palmerperformance.com/for...?topic=6351.90

nzer · 03-15-2014, 05:13 AM

Quote:

Originally Posted by nlowell

Time to wake up this thread - the updated version of Dash Command has been submitted to the app store with FT86 PIDs including oil temp and is awaiting Apple's approval! The update was submitted early this week so it should be approved by early next week.

http://www.palmerperformance.com/for...?topic=6351.90

Great work and thanks to the club for getting them to give this priority.

Special thanks to I think @fisher445 that took his car in for them to test.

fisher445 · 03-15-2014, 05:18 AM

Only had to take it in to them twice for like 20 minutes at a time so not to bad. So hopefully it works out for you guys!

Sent from my iPhone using Tapatalk

nofferman · 03-18-2014, 12:31 AM

awesome news! Thank you nzer, fisher445, and everyone who kept on Palmer about this!

kludger · 03-18-2014, 12:22 PM

Thanks for the heads up, glad that our requests were listened to.

digital_assassin · 03-21-2014, 05:22 PM

They didn't pass the review and have since corrected it. Going to be sometime next week at this point for the update.

subiestyle · 03-21-2014, 06:39 PM

so how many miles or minutes of average driving does it take for our engine oil to get up to operating temperature?

Tromatic · 03-25-2014, 02:28 PM

Hmm. I have the Android Torque app and can't seem to get oil temp. Any help?

amram · 03-25-2014, 06:00 PM

Good work guys, sub'd.

TemeCal · 03-25-2014, 06:22 PM

Quote:

Originally Posted by Tromatic

Hmm. I have the Android Torque app and can't seem to get oil temp. Any help?

See post 2 here:
http://www.ft86club.com/forums/showthread.php?t=23530

04-20-2013, 12:22 AM	#1
nzer Senior Member Join Date: Jun 2012 Drives: 2012 Grey TRD GT86, 2015 VW Golf R Location: Wellington, New Zealand Posts: 1,572 Thanks: 666 Thanked 942 Times in 540 Posts Mentioned: 62 Post(s) Tagged: 0 Thread(s)	Dash Command App and Oil Temp on iPhone and iPad As many of you will know you cannot currently add the oil temp PID for the twins to Dash Command to get oil temp to show on an iPad or iPhone. Best option at the moment is to use Torque on an Android. Not good for iOS users. If you use an iPhone or iPad and want to be able to see oil temp gauge using dash command PLEASE go to the developers Dash Commnd forum and add you voice to the request thread here. http://www.palmerperformance.com/for...pic=6351.0;all They are looking at adding Toyota/Subaru specific sets of data but also other makes. The more of us that request either being able to add specific PIDs or a Toyota/Subaru set the more likely we get to the front of the queue for development. Also a good idea to write an app review of Dash Command and tell them you have voted it down due to no oil temp for the 86 or BRZ. Let's get the FT86 Club to put the pressure on their development team! 86ers are go! . __________________ My fully loaded TRD86 http://www.ft86club.com/forums/showt...760#post582760

03-15-2014, 03:32 AM	#5
nlowell Senior Member Join Date: May 2013 Drives: 2013 Scion FRS Location: Dallas, TX Posts: 443 Thanks: 105 Thanked 409 Times in 173 Posts Mentioned: 51 Post(s) Tagged: 0 Thread(s)	Time to wake up this thread - the updated version of Dash Command has been submitted to the app store with FT86 PIDs including oil temp and is awaiting Apple's approval! The update was submitted early this week so it should be approved by early next week. http://www.palmerperformance.com/for...?topic=6351.90 __________________ Complete Part Out: http://www.ft86club.com/forums/showthread.php?t=125688

03-21-2014, 05:22 PM	#10
digital_assassin Senior Member Join Date: Feb 2011 Drives: 2013 FR-S Matte Orange Location: Portland, OR Posts: 2,016 Thanks: 489 Thanked 937 Times in 507 Posts Mentioned: 168 Post(s) Tagged: 0 Thread(s)	They didn't pass the review and have since corrected it. Going to be sometime next week at this point for the update. __________________ NORTHWEST86 DECAL - NORTHWEST86 GEAR MY BUILD

03-25-2014, 06:00 PM	#13
amram Senior Member Join Date: May 2012 Drives: 2013 FR-S AT Location: New Jersey Posts: 102 Thanks: 642 Thanked 27 Times in 22 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Good work guys, sub'd. __________________ "That's why I like the GT86 so much..... It's a car designed for one thing only: fun." - Jeremy Clarkson

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
iPad Mini dash kit for FT86	Esoteric	Electronics \| Audio \| NAV \| Infotainment	92	08-04-2014 07:54 PM
Racing Dash/Windshield Mount for Iphone	kombatlion	Scion FR-S / Toyota 86 GT86 General Forum	3	04-04-2013 06:23 AM
Voice or GUI command to pause guidance?	Sovran	Electronics \| Audio \| NAV \| Infotainment	0	09-25-2012 02:21 PM
Toyota 86 AR App for iPad and iPhone	travace	Off-Topic Lounge [WARNING: NO POLITICS]	1	09-25-2012 02:54 AM
handsfree voice command help	lbroskee	Electronics \| Audio \| NAV \| Infotainment	5	09-13-2012 04:51 PM

06-11-2013, 04:00 AM	#2
sw20kosh Senior Member Join Date: Jul 2012 Drives: 2013 Black FR-S Location: SF Posts: 3,030 Thanks: 881 Thanked 2,014 Times in 990 Posts Mentioned: 153 Post(s) Tagged: 1 Thread(s)	Thanks for this!

02-02-2014, 08:16 PM	#3
dssence Senior Member Join Date: Jan 2014 Drives: Toyota FT/MT 86 Location: argentina Posts: 247 Thanks: 116 Thanked 6 Times in 6 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Hey I'm looking to a way to interface the FRS with android , I have the stock stereo, hows that possible, I want to have more information from the ecu on my tablet which is runnin android. Any ideas?

03-18-2014, 12:31 AM	#8
nofferman Member Join Date: Apr 2013 Drives: BRZ Location: Wisconsin Posts: 17 Thanks: 28 Thanked 7 Times in 5 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	awesome news! Thank you nzer, fisher445, and everyone who kept on Palmer about this!

03-18-2014, 12:22 PM	#9
kludger Senior Member Join Date: Oct 2012 Drives: '13 Boxter S, '13 BRZ(gone) Location: SE PA Posts: 235 Thanks: 309 Thanked 103 Times in 57 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Thanks for the heads up, glad that our requests were listened to.

03-21-2014, 06:39 PM	#11
subiestyle Senior Member Join Date: Feb 2014 Drives: 2014 Monogram FR-S White MT Location: San Francisco Posts: 433 Thanks: 62 Thanked 106 Times in 68 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	so how many miles or minutes of average driving does it take for our engine oil to get up to operating temperature?

03-25-2014, 02:28 PM	#12
Tromatic Banned Join Date: May 2013 Drives: FR-S Location: Portland, OR Posts: 2,232 Thanks: 61 Thanked 1,728 Times in 786 Posts Mentioned: 19 Post(s) Tagged: 0 Thread(s)	Hmm. I have the Android Torque app and can't seem to get oil temp. Any help?

User Name		Remember Me?
Password