|
Engine, Exhaust, Transmission Discuss the FR-S | 86 | BRZ engine, exhaust and drivetrain. |
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
Weight Nazi
Join Date: Aug 2012
Drives: 13 FRS -399lb, 11 335is, 05 Tiburon
Location: Biloxi, MS / Gulf Coast 86
Posts: 3,702
Thanks: 5,009
Thanked 3,712 Times in 1,765 Posts
Mentioned: 150 Post(s)
Tagged: 4 Thread(s)
|
![]() Thanks everybody who's contributed information. If you would like to add information, please link your source of information, or better yet: post a photo of the part on a scale like in the official weight thread. If you don't give me a source, I will use your post as the source. We're thorough around here! I've also decided to color code parts by diameter. Matching colors = less turbulence = minimized loss of horsepower 2.118"/53.8mm, 2.25"/57.15mm 2.36"/60mm, 2.38"/60.5mm, 2.5"/63.5mm, 2.76"/70.1mm, 3.15"/80mm Unknown ***Note that some measurements may be inner diameter, and some may be outer diameter. Check your sources if diameter is a concern to you, which it should be if you want hp/tq gains*** Headers: 30.00lbs - FA20Club (Source) 21.10lbs - Greddy Catted (Source) 20.90lbs - Stock (Source) 16.30lbs - Greddy Catless (Source) 14.00lbs - Hotpipes Forceworks UEL Header (Source) 13.89lbs - 1320 UEL (Source) 13.65lbs - HKS EL (Source) 13.00lbs - JDL (Source) 12.65lbs - T1R (Source) 12.00lbs - Rev Works (Source) 10.90lbs - Nameless Stepped 1.500-1.625 Catted (Source) 10.20lbs - Borla UEL (Source) Over Pipes: 11.4lbs - Nameless Over/Front Pipe Combo catted resonated (Source) 6.70lbs - Borla Cat Delete Pipes (Front & Over combo) (Source) 4.50lbs - Stock (Source) 3.50lbs - Milltek Sport (Source) 3.50lbs - Perrin (Source) 3.13lbs - 1320 (Source) 3.00lbs - PLM Overpipe (Source) 2.94lbs - Avo Turbo World ceramic coated (Source) Front Pipes: 12.2lbs - Stock (Source) 11.4lbs - Nameless Over/Front Pipe Combo catted resonated (Source) 09.0lbs - Avo Turbo World catted (Source) 07.8lbs - Tsudo (Source) 07.2lbs - Invidia catless resonated (Source) (Diameter) 07.0lbs - PLM with high flow cat (Source) 06.7lbs - Borla Cat Delete Pipes (Front & Over combo) (Source) 05.2lbs - T1R (Source: PM from FT-86 SpeedFactory) 03.1lbs - Tomei (Source) 02.2lbs - Amuse (Source) Mid Pipes: 12.40lbs - Stock (Source) 12.35lbs - Tsudo (Source) 08.60lbs - Invidia as used on N1 and Q300 (Source) (Diameter) 07.50lbs - Tommy Kaira Titanium (Source) Catback Exhausts: 40.80lbs - MXP Prototype (Source) 39.00lbs - Invidia Q300 (Source) (Diameter) 38.50lbs - Stock (Source) (Diameter) 36.60lbs - HKS Legamax Premium (Source) 36.40lbs - Magnaflow (Source) 34.80lbs - GReddy EVO3 (Source) 33.95lbs - Tsudo (Source) 33.60lbs - Isis Street (Source) 33.60lbs - Perrin Dual Single Tip (Source) 33.40lbs - Berk (Source) 33.00lbs - TRD USA (Source) (Diameter?) 31.00lbs - Milltek Sport Resonated (Source) 30.80lbs - GReddy/TRUST CS GTS V2 (Source) 29.20lbs - Dezod Motorsports Dual Exit (Source) 29.00lbs - Invidia N1 (Source) (Diameter) 28.00lbs - Milltek Sport Non-Resonated (Source) 28.00lbs - Borla (Source) 26.00lbs - FT86SpeedFactory V2 (Source) 25.20lbs - Agency Power (Source) 22.00lbs - HKS Hi-Power (Source) (Diameter) 22.00lbs - Tanabe Concept G (Source) (Diameter) 21.60lbs - Tommy Kaira Titanium (Source) 18.00lbs - Buddy Club Spec II (Source) (Diameter) 17.08lbs - This Thing 16.53lbs - Panda Performance Titanium (Source) 16.10lbs - Tomei 80 (Source) 15.43lbs - TO-YO-07 (Source) 14.10lbs - Tomei 60S (Source) <12.0lbs - T1R 70RT Titanium (Limited time group buy, get it while you can!) 10.20lbs - Tomei 60R (Source) Although mine weighs 9.98lbs - photo 09.70lbs - STM Aluminum Dual Exit (Source) 08.40lbs - Amuse R1000 Single Exit (Source) 2.118"/53.8mm, 2.25"/57.15mm 2.36"/60mm, 2.38"/60.5mm, 2.5"/63.5mm, 2.76"/70.1mm, 3.15"/80mm Unknown Based on all this information, the factory engine back system weighs 76.1lbs. The current lightest combination is: Borla UEL headers, Avo over pipe, Amuse front and catback sytem for a total of 23.74lbs, saving 52.36lbs from stock.
__________________
Last edited by Anthony; 10-20-2015 at 09:45 AM. Reason: Adding new information as it arrives. |
![]() |
![]() |
The Following 64 Users Say Thank You to Anthony For This Useful Post: | 37 (07-25-2013), 86 South Africa (10-18-2015), aagun (12-26-2013), adprokid (11-04-2013), Ammunition (09-07-2014), androopoo (03-31-2015), Black Tire (02-23-2015), BlueDubbinTDI (12-30-2013), Bonburner (10-28-2018), BrianJC (08-05-2013), Brinks (08-07-2014), Bykov (05-16-2018), CajunFRS (09-12-2013), calmtigers (12-04-2013), Captain Snooze (07-25-2013), conehead (09-25-2019), diss7 (07-27-2013), Donbrz (03-11-2015), D_Thissen (07-08-2015), Enraged21 (11-30-2013), flippy (07-26-2013), fstlane (10-13-2013), FT86Z (06-04-2018), FT_86_SM_GP (04-21-2015), garfull (10-05-2013), Hawk77FT (08-02-2013), jdmasfcuk (09-19-2013), JiB (07-25-2013), JMon85 (03-09-2018), juliog (08-10-2013), kalamitykode (12-26-2015), Keenercarguy (04-03-2016), Lawnik (12-04-2013), Luckrider (06-29-2014), mad_sb (09-07-2013), Mikem53 (12-17-2013), Mr.Jay (09-23-2013), mwjcyber (09-07-2013), new2subaru (11-07-2015), NWFRS (08-01-2014), onabulletride (01-08-2014), pcuerpo (11-27-2013), Pekingduck (07-05-2015), philooo (07-05-2015), raul (08-14-2013), RehabJeff86 (12-01-2013), rookietopro_frs (10-12-2017), s2d4 (08-01-2013), ShibusaTouge (12-15-2017), Sithspawn (08-03-2013), SuperTom (04-21-2018), supra2nv (11-11-2015), supramkivtt2jz (07-26-2013), Teseo (01-30-2015), tgat86 (01-21-2015), tigermack (09-17-2014), Tristor (05-29-2018), trustyler (11-15-2013), ultra (08-01-2013), Uplink (03-12-2015), Valentino (05-26-2015), WRB-DZA-BRZ (09-04-2013), YMAA (09-07-2013), zephyr69 (07-25-2013) |
![]() |
#2 |
Weight Nazi
Join Date: Aug 2012
Drives: 13 FRS -399lb, 11 335is, 05 Tiburon
Location: Biloxi, MS / Gulf Coast 86
Posts: 3,702
Thanks: 5,009
Thanked 3,712 Times in 1,765 Posts
Mentioned: 150 Post(s)
Tagged: 4 Thread(s)
|
I've also emailed two titanium exhaust manufacturers. I know a one-off titanium exhaust would be ungodly expensive and probably not worth the weight savings, even for me, but maybe a group buy could make it reasonable.
__________________
|
![]() |
![]() |
The Following User Says Thank You to Anthony For This Useful Post: | juliog (08-10-2013) |
![]() |
#3 |
Member
Join Date: Jun 2013
Drives: 2013 FRS 1986 Corolla GTS
Location: PA
Posts: 38
Thanks: 2
Thanked 7 Times in 7 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
38.5lbs - stock
35lbs - GReddy EVO3 22lbs - HKS Hi-Power 22lbs Tanabe Concept G 33lbs - TRD USA Last edited by coupeae86; 07-25-2013 at 05:57 AM. Reason: more exhausts |
![]() |
![]() |
The Following User Says Thank You to coupeae86 For This Useful Post: | Anthony (07-25-2013) |
![]() |
#4 |
dying bird under the hood
Join Date: Mar 2013
Drives: 2013 SWP Limited BRZ
Location: Disneyland, California
Posts: 1,331
Thanks: 546
Thanked 451 Times in 295 Posts
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
|
http://www.ft86club.com/forums/showthread.php?t=27092 <-borla header & perrin overpipe
http://www.ft86club.com/forums/showthread.php?t=9179 <- nameless header http://www.ft86club.com/forums/showthread.php?t=30936 <-Rev works header http://www.ft86club.com/forums/showthread.php?t=21076 <- JDL Headers/Exhaust system total weight loss 40lbs. http://www.ft86club.com/forums/showthread.php?p=597493 <-^ https://www.privatelabelmfg.com/category_s/63.htm <- PLM Overpipe / Frontpipe w/ high flow cat Borla header 10.2lbs perrin overpipe 3.5lbs nameless header 10.9-11.6lbs rev works header 12lbs JDL Headers/Exhaust -40lbs total PLM Overpipe 3lbs PLM front pipe with high flow cat 7lbs Last edited by midnight23; 07-25-2013 at 06:13 AM. |
![]() |
![]() |
The Following User Says Thank You to midnight23 For This Useful Post: | Anthony (07-25-2013) |
![]() |
#5 |
Weight Nazi
Join Date: Aug 2012
Drives: 13 FRS -399lb, 11 335is, 05 Tiburon
Location: Biloxi, MS / Gulf Coast 86
Posts: 3,702
Thanks: 5,009
Thanked 3,712 Times in 1,765 Posts
Mentioned: 150 Post(s)
Tagged: 4 Thread(s)
|
I suppose this is the weight of the stock exhaust from the cat back?
__________________
|
![]() |
![]() |
![]() |
#6 | |
Weight Nazi
Join Date: Aug 2012
Drives: 13 FRS -399lb, 11 335is, 05 Tiburon
Location: Biloxi, MS / Gulf Coast 86
Posts: 3,702
Thanks: 5,009
Thanked 3,712 Times in 1,765 Posts
Mentioned: 150 Post(s)
Tagged: 4 Thread(s)
|
Thanks, midnight23! Updated OP. But...
Quote:
__________________
|
|
![]() |
![]() |
![]() |
#7 |
dying bird under the hood
Join Date: Mar 2013
Drives: 2013 SWP Limited BRZ
Location: Disneyland, California
Posts: 1,331
Thanks: 546
Thanked 451 Times in 295 Posts
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
|
Probably because the headers alone are 20lbs
|
![]() |
![]() |
![]() |
#8 |
Weight Nazi
Join Date: Aug 2012
Drives: 13 FRS -399lb, 11 335is, 05 Tiburon
Location: Biloxi, MS / Gulf Coast 86
Posts: 3,702
Thanks: 5,009
Thanked 3,712 Times in 1,765 Posts
Mentioned: 150 Post(s)
Tagged: 4 Thread(s)
|
Weird. When I click on it in the link where I quoted you, it works. But when I click on your link in your original post, I get the message.
__________________
|
![]() |
![]() |
The Following User Says Thank You to Anthony For This Useful Post: | 86socal (08-07-2014) |
![]() |
#9 | |
dying bird under the hood
Join Date: Mar 2013
Drives: 2013 SWP Limited BRZ
Location: Disneyland, California
Posts: 1,331
Thanks: 546
Thanked 451 Times in 295 Posts
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
![]() |
![]() |
![]() |
#10 | |
dying bird under the hood
Join Date: Mar 2013
Drives: 2013 SWP Limited BRZ
Location: Disneyland, California
Posts: 1,331
Thanks: 546
Thanked 451 Times in 295 Posts
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
|
Quote:
![]() |
|
![]() |
![]() |
The Following User Says Thank You to midnight23 For This Useful Post: | Anthony (07-25-2013) |
![]() |
#11 |
Weight Nazi
Join Date: Aug 2012
Drives: 13 FRS -399lb, 11 335is, 05 Tiburon
Location: Biloxi, MS / Gulf Coast 86
Posts: 3,702
Thanks: 5,009
Thanked 3,712 Times in 1,765 Posts
Mentioned: 150 Post(s)
Tagged: 4 Thread(s)
|
Thanks. I'm listing you as the source on these numbers. I got the same number from Tanabe's website, so I'll use that for that source. Get me some links and I'll update.
__________________
|
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: Oct 2012
Drives: WR Blue Pearl 2022 Subaru BRZ
Location: Melbourne
Posts: 818
Thanks: 790
Thanked 517 Times in 274 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
|
Hotpipes Forceworks UEL 4-1 Header - 14lbs
|
![]() |
![]() |
The Following User Says Thank You to Blighty For This Useful Post: | Anthony (07-25-2013) |
![]() |
#13 |
Senior Member
Join Date: Sep 2012
Drives: 2014 Jeep Wrangler RubiconX
Location: Midwest, USA
Posts: 1,282
Thanks: 110
Thanked 292 Times in 224 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
|
Thanks for this thread. A topic near and dear to my heart.
Invidia Q300 = 39 Invidia N1 = 29 |
![]() |
![]() |
The Following User Says Thank You to Captain Insano For This Useful Post: | Anthony (07-25-2013) |
![]() |
#14 |
Weight Nazi
Join Date: Aug 2012
Drives: 13 FRS -399lb, 11 335is, 05 Tiburon
Location: Biloxi, MS / Gulf Coast 86
Posts: 3,702
Thanks: 5,009
Thanked 3,712 Times in 1,765 Posts
Mentioned: 150 Post(s)
Tagged: 4 Thread(s)
|
Gooo! Heavy. Thanks, added.
__________________
|
![]() |
![]() |
|
|
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Borla UEL headers + HKS Front pipe + Greddy SP AxleBack = music sounds to my ears. | NoFear99 | FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum | 21 | 09-22-2013 11:02 PM |
FS: OEM Exhaust and Mid and front pipe | Bcarlos | Engine, Exhaust, Bolt-Ons | 3 | 07-24-2013 05:16 PM |
Exhaust,test pipe, over pipe, headers, or suspension build | ShikoBariki | Engine, Exhaust, Transmission | 20 | 05-01-2013 04:16 PM |
P&L Catted headers and Nameless catted Front pipe. Also is this cricket noise? | Xdragonxb0i | Engine, Exhaust, Transmission | 23 | 04-24-2013 12:29 PM |