Alignment feedback - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

cmiovino · 04-04-2025, 11:52 PM

I ran -4/-2.2 camber, zero toe last year on 200TW (A052's) and I was amazed at how much the insides shredded with only ~4k street miles to and from events. 3 tires were showing cords and one was on a brink. All very even overall.

Still, I thought I'd at least make it a full season of autocross like that. Car drove fine though. No weird wandering issues people warned of.

RT-BRZ · 04-05-2025, 12:19 AM

Quote:

Originally Posted by cmiovino

I ran -4/-2.2 camber, zero toe last year on 200TW (A052's) and I was amazed at how much the insides shredded with only ~4k street miles to and from events. 3 tires were showing cords and one was on a brink. All very even overall.

Still, I thought I'd at least make it a full season of autocross like that. Car drove fine though. No weird wandering issues people warned of.

I run -4.5/-3 with zero toe on mine but it doesn't get a ton of road miles and I didn't notice any unusual wear. I would definitely put mine more in the vein of "race car" than street car though.

2.2Lude · 04-05-2025, 12:26 AM

Quote:

Originally Posted by cmiovino

I ran -4/-2.2 camber, zero toe last year on 200TW (A052's) and I was amazed at how much the insides shredded with only ~4k street miles to and from events. 3 tires were showing cords and one was on a brink. All very even overall.

Still, I thought I'd at least make it a full season of autocross like that. Car drove fine though. No weird wandering issues people warned of.

Curious, were you running an aftermarket front sway bar with your set up? I noticed tramlining on my set up once I put in a Eibach 25mm front bar.

cmiovino · 04-05-2025, 05:05 PM

Quote:

Originally Posted by 2.2Lude

Curious, were you running an aftermarket front sway bar with your set up? I noticed tramlining on my set up once I put in a Eibach 25mm front bar.

I have a 19mm Perrin set on stiff which is only 75% stiffer than stock.

Stonehorsw · 04-10-2025, 02:39 PM

For the 2nd gen, I think you may have issues with this setup due to offset. The dang tab on the quarter panel. This is a great setup for 1st gen.

04-04-2025, 11:52 PM	#15
cmiovino Senior Member Join Date: Aug 2020 Drives: 2017 BRZ PP, 2004 WRX Location: Pittsburgh Posts: 481 Thanks: 40 Thanked 355 Times in 218 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	I ran -4/-2.2 camber, zero toe last year on 200TW (A052's) and I was amazed at how much the insides shredded with only ~4k street miles to and from events. 3 tires were showing cords and one was on a brink. All very even overall. Still, I thought I'd at least make it a full season of autocross like that. Car drove fine though. No weird wandering issues people warned of. __________________ 2017 BRZ Limited Performance Pack - Steel Cities Region SCCA / North Hills Sports Car Club

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alignment settings/Alignment Shop	v1beeee	CANADA	27	04-24-2017 05:54 PM
WGP?CXR LS Kit (need feedback)	Eris-time	Engine Swaps	15	01-26-2017 01:20 PM
Camber/alignment for Eibach Prokit and when should I get alignment?	Meanderchap	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	3	02-01-2016 04:44 AM
ABS feedback??	calidus	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	2	03-17-2015 07:39 PM
DIY alignment - quick way to set alignment while new suspension settles?	1Cor10:23	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	6	12-11-2014 10:53 PM

04-10-2025, 02:39 PM	#19
Stonehorsw Senior Member Join Date: Jul 2020 Drives: 18 Brz (Sold) / 22 BRZ Location: Michigan Posts: 671 Thanks: 1,139 Thanked 445 Times in 261 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	For the 2nd gen, I think you may have issues with this setup due to offset. The dang tab on the quarter panel. This is a great setup for 1st gen.

User Name		Remember Me?
Password