Stuck Odometer

[Grady]

Originally Posted by humfrz

OR ....... a bigger "container" -

Now that is what I am talking about!

[Grady]

Originally Posted by Netrick

This actually is a US cluster. The only thing that was done is units translation by a professional, and i changed this black unit sheet, still have original (US) one. As i said before IT WAS counting distance as it suppose to be, the issue appeared over night when i parked the car.

I have not found solution yet, i'll keep you notified of any news

Pull the cluster back out and check all your connectors/pins. You may just have a pin damaged or connector not seated all the way.

[FR-S2GT86]

Originally Posted by Grady

Pull the cluster back out and check all your connectors/pins. You may just have a pin damaged or connector not seated all the way.

Agreed. Even “professionals” can make mistakes.

[RZNT4R]

Originally Posted by Grady

Pull the cluster back out and check all your connectors/pins. You may just have a pin damaged or connector not seated all the way.

Unlikely.

Vehicle speed over CAN is working because the trip meter and speedometer are working.

HOWEVER, It occurs to me that OP says he had no codes... it's worth asking if he checked of codes with a "code reader", or if he actually accessed the instrument cluster and stability control ECU for codes.

Most "code reader" will only check the PCM Pxxxx codes, not Cxxxx chassis, Uxxxx network or Bxxxx body codes, which might be in play here.