Will this fit? (width, offset and tire size Qs)

[IloveBaldEagles]

When buying a 17x8, is that all wheel sizes? Also, what tire size will be a perfect fitment so that the fender will not hurt the tire during AutoX? And finally spacers, what is best recommended?

Also planning in the future to drop car an inch, will it affect the fitment?

Thanks

[NorseLegend]

Will 19x9.5 +38 ForgeStars F1 Deep Concave with Goodyear Eagle F1s 255/30/19 fit? Or would I need to roll the fenders?

Thanks!

[Fresh86]

check up the wheel thread very helpful

[ill86]

Originally Posted by NorseLegend

Will 19x9.5 +38 ForgeStars F1 Deep Concave with Goodyear Eagle F1s 255/30/19 fit? Or would I need to roll the fenders?

Thanks!

Front or rear?

[ill86]

Originally Posted by Sekal

When buying a 17x8, is that all wheel sizes? Also, what tire size will be a perfect fitment so that the fender will not hurt the tire during AutoX? And finally spacers, what is best recommended?

Also planning in the future to drop car an inch, will it affect the fitment?

Thanks

Not sure what you are asking.

17x8 = 17" diameter, 8" width. You also need to consider offset.

Tire selection - 215mm wide to 255mm wide.

Why do you need spacers?

1" drop won't "hurt" much. Just be sure to align it again after fitment.

[blags]

Originally Posted by VENOM~

Anyone know if 9.5 +20 & 10.5 +30 front/rear will work without to much fuss? Pull and roll I'm thinking.

Currently in the process of getting new wheels. I will most likely be going 18x9.5 +20 running a 215/45 and 18x10 +25 running a 225/45.
Going by the 86 in Japan, the extra width of the 10.5 has caused some issue inside his guards. The 10" wheel will mean you can probably run a 225 tire rather than a 235 with a 10.5". You might need a slight roll, depends how low you will go and how much camber you run....

[NorseLegend]

Originally Posted by ill86

Front or rear?

Both.

[bulldog11267mad]

im looking at getting rays Gram light 57 xtremes i want 18 inchs. i have a turbo kit for the car so i want the widest i can go without sticking out. i am thinking 18x8.5 33 offset for the front and 18x9.5 40 offset for the rear. im wanting to run 265s on the rear and about 225 on front. will this work or is there a betting size. right now the car is stock height but i might lower 1-1.5 inches

[Pure Automotive]

Originally Posted by bulldog11267mad

im looking at getting rays Gram light 57 xtremes i want 18 inchs. i have a turbo kit for the car so i want the widest i can go without sticking out. i am thinking 18x8.5 33 offset for the front and 18x9.5 40 offset for the rear. im wanting to run 265s on the rear and about 225 on front. will this work or is there a betting size. right now the car is stock height but i might lower 1-1.5 inches

18x9.5 +30 with 255 Rear is close to the shock, there aren't many tires in a 265, and honestly a 255 is a 10" contact patch give or take, you don't need much more

[bulldog11267mad]

Originally Posted by Pure Automotive

18x9.5 +30 with 255 Rear is close to the shock, there aren't many tires in a 265, and honestly a 255 is a 10" contact patch give or take, you don't need much more

so the wheel and tire combo i mentioned for the front will fit but the rear needs to be 255 to fit?

[Pure Automotive]

Originally Posted by bulldog11267mad

so the wheel and tire combo i mentioned for the front will fit but the rear needs to be 255 to fit?

Front should be fine, I posted pics of my setup a page or 2 back i think

[GC GTS Aero Kit]

will 18" x 9" +45 offset with 255/35R18 fit all 4 corners?

[whitefrs]

Originally Posted by GC GTS Aero Kit

will 18" x 9" +45 offset with 255/35R18 fit all 4 corners?

Yes

[DeepDish]

How i can get 5x120 bolt pattern wheels onto an frs/brz which have 5x100 pattern. if anyone has ever done it or know how it can be done, please let me know thanks in advance