Nameless Performance Equal Length Stepped Header

[Lonewolf]

Originally Posted by Jason@Nameless

Will probably find out what it'll do to a supercharged car sooner than later. Should have one of these down to Mike Kojima at MotoIQ for testing on his supercharged FR-S in the near future.

Nameless Performance intake manifold is already in the works over here, btw...have a few different designs we are pondering and drawing up in CAD already.

Jason

Any rough eta for the intake manifold?

[FR-S Matt]

Originally Posted by Jason@Nameless

Lulz. If anyone wants to call us to discuss any of this or get more information, we're always available to chat...until the phone rings and I have to chat with the next guy. Orbital, sorry I had to cut our conversation short...we'll chat more about the diffuser stuff soon! Matt, you can call whenever you want to discuss. :-D

Somebody on FB asked me for a copy of the uncorrected results so I figure I'll put some of them in here as well. Here is a LINK to the photo of the uncorrected results, I didn't want to get them confused with the actual results, so here they are: Uncorrected Dyno Results - Nameless Performance Long Tube 4-2-1 Stepped Header.

Not sure if the person who asked wanted to know if the correction factor was unduly boosting the numbers or what, but uncorrected the gains are 51ft lb and 38hp in the dip w/ 34hp gained at redline. And this was our strongest overall stock baseline pull - we also had one that made a hell of a lot more than that off stock, but it's one of the weaker stock pulls.

Jason

Oh, I'll wait a bit Jason. I'm still recovering from that graph. Just from that test alone, I'm already convinced my system will be Nameless from the header to the tips. Simply outstanding. I'm really excited and can't wait to hear more results with the different tests.

[OrbitalEllipses]

Originally Posted by Lonewolf

Any rough eta for the intake manifold?

Don't care unless ITBs! Well. Do care, will buy!

Originally Posted by disgruntld

Good lord, how much of my money are you trying to take?!

All of it. Let me get my wallet out...

Originally Posted by Jason@Nameless

Lulz. If anyone wants to call us to discuss any of this or get more information, we're always available to chat...until the phone rings and I have to chat with the next guy. Orbital, sorry I had to cut our conversation short...we'll chat more about the diffuser stuff soon! Matt, you can call whenever you want to discuss. :-D

...

Jason

Til next time!

[xjohnx]

PS - They are already forming a wait-list for the header, if you want on it, i'd email sales@namelessperformance.com

[bdohazelnuts]

Originally Posted by Jason@Nameless

+34hp and +46ft lb sound good to y'all? Oh, that's right in the middle of the torque dip, btw...+20ft lb and +15-30hp from 5k to redline. Next step is to test this with smaller exhaust and see if it bumps the midrange and takes a little off the top. So, see...the wait might just be worth it...

There is a pretty staunch dead spot for ~200rpm right about 3200rpm. Guessing that gigantic exhaust is exacerbating this and can't wait to test this setup with a few different existing exhaust configurations...



Kinda cool, eh?

Jason

Hurry up and get this to the market so that I can give you my moneys!

[Freeman]

Originally Posted by OrbitalEllipses

Don't care unless ITBs! Well. Do care, will buy!



All of it. Let me get my wallet out...



Til next time!

Diffuser? Color me interested.....

Sent from my Nexus 7 using Tapatalk 2

[OrbitalEllipses]

Originally Posted by Freeman

Diffuser? Color me interested.....

Sent from my Nexus 7 using Tapatalk 2

Yup. The more people that bug 'em the better! Started out as a harmless post on their Facebook...

[mangostick]

Originally Posted by FR-S Matt

There's no proof yet that there is a performance compromise on this car with either header. Not enough tests.

You were saying? lol

Nice work nameless! I see my wallet succumbing to your jedi mind tricks ..

[Pandle]

I just bought q300 cat back like two weeks ago... I like it a lot but would i be seeing similar gains if i bought just the header? Is there something else I'd be missing?

[Jason@Nameless]

Originally Posted by Freeman

Diffuser? Color me interested.....

Sent from my Nexus 7 using Tapatalk 2

Yeah there's a post on our FB page discussing that and we'll be starting a new thread here to discuss as well. Have a handful of ideas we are playing around with and we're no strangers to badass cnc formed sheet metal designs. Until we discuss it in another thread I'm going to keep it out of this one.

Jason

[Zgrinch]

I am so glad I waited and recenty ordered the new axleback. (Can't wait to get it BTW). One thing is certain, once this testing is done my wallet is coming right back open.

@Jason@Nameless with all the hours your putting in, here's hoping you get a little down time to have a few :happy0180: and try that rib recipe I sent ya.

Great stuff!

[GH05T]

Wow that is amazing. My question is (not sure if it was covered already) how obnoxiously loud is it with the headers + full exhaust system?

[Freeman]

Originally Posted by OrbitalEllipses

Yup. The more people that bug 'em the better! Started out as a harmless post on their Facebook...

Originally Posted by Jason@Nameless

Yeah there's a post on our FB page discussing that and we'll be starting a new thread here to discuss as well. Have a handful of ideas we are playing around with and we're no strangers to badass cnc formed sheet metal designs. Until we discuss it in another thread I'm going to keep it out of this one.

Jason

Alrighty then, I'm off to stalk your facebook!

Sent from my Nexus 7 using Tapatalk 2

[xjohnx]

Originally Posted by GH05T

Wow that is amazing. My question is (not sure if it was covered already) how obnoxiously loud is it with the headers + full exhaust system?

From what i understand, the 3" version is stupid loud. they're hoping the 2.5" version quiets it down and might even bump power.