|
||||||
| Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing. |
 |
|
|
Thread Tools | Search this Thread |
10-28-2012, 12:29 AM
|
#43 |
|
Banned
Join Date: Aug 2012
Drives: VortechSC,BorlaEL,Perrin,GCRace
Location: HighHeatHighAltitudeAZ,USA
Posts: 2,254
Thanks: 458
Thanked 669 Times in 394 Posts
Mentioned: 9 Post(s)
|
spent day at track today
1/8 toe out up front, camber -1.4 could use more.. hair less than 1/8 total toe in rear, waiting on parts for rear camber must order plates to correct caster, camber bolts alone dont cut it... star specs were....more than adequate for my mid project interim setup. slightly under sprung for track use and under dampened, but cant say initial turn in had any understeer need track level sway bars |
|
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Crash bolts alignment change | ABQautoxer | Tracking / Autocross / HPDE / Drifting | 39 | 03-24-2014 05:45 PM |
| The CRASH n BUMP thread!! | MattQ-WP | Issues | Warranty | Recalls / TSB | 11 | 11-13-2012 07:05 PM |
| seat bolts? | zooki | Cosmetic Modification (Interior/Exterior/Lighting) | 3 | 08-29-2012 06:00 PM |
| where to get alignment? | FML | Hawaii | 2 | 08-08-2012 01:36 AM |
| replace front crash bolts to add camber? | Matt Andrews | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 15 | 06-15-2012 10:05 AM |
