Bedding Brake Pads - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Monroetwin · 07-22-2022, 07:22 AM

Quick novice question…

Just had Ferodo DS2500 pads installed (with new fluid too). I need to bed the brake pads without access to a track. My plan is to try to do it in the parking lot at my work tomorrow. Question… Is there any issue using the brakes (lightly) driving around town between now and then? My work is about 15 miles from my house and there are several stop lights. My only other option would be to get up early and find an empty road (rural’ish) and hope to not get interrupted during the process…

Thanks in advance!

ZDan · 07-22-2022, 10:58 AM

Honestly I haven't had issues just bedding pads driving normally on the street and 1st session of the day at the track. I haven't tried any "bedding" procedures on the street for probably 15 years now! That's using a variety of pads from Carbotech, Winmax, Project Mu, and CSG, and swapping back/forth with various OEM and aftermarket "street" pads. No experience with Ferodo DS2500 though...

Code Monkey · 07-22-2022, 11:21 AM

No problem driving around for a while before bedding them properly.

DrinkenBRZ · 07-22-2022, 05:33 PM

As these guys have said just drive to bed those pads. I only intentionally bed full, hard core compounds now.

Monroetwin · 07-23-2022, 06:26 AM

Ok. Good to know! Thanks for the responses!

norcalpb · 07-23-2022, 03:43 PM

Quote:

Originally Posted by ZDan

Honestly I haven't had issues just bedding pads driving normally on the street and 1st session of the day at the track. I haven't tried any "bedding" procedures on the street for probably 15 years now! That's using a variety of pads from Carbotech, Winmax, Project Mu, and CSG, and swapping back/forth with various OEM and aftermarket "street" pads. No experience with Ferodo DS2500 though...

I knew you had tracked without bedding before so on my most recent track day I decided not to bed my new pads. They smelled awful on my first session, but after that they worked just as well as my last set of bedded pads (DTC-60 pads, probably helped that my old rotors still had bedding from my old DTC-60s)

Ultramaroon · 07-23-2022, 07:01 PM

Bedding is good if you smear pad on the rotors. Otherwise,... Your Meh May Vary

Autoxer62 · 07-25-2022, 08:43 AM

I have generally bedded pads (autocross compounds mostly) with 10 hard applications from 40 to 15 on a light traffic street, then park the car overnight. Braking gets notably better at the end of the cycle.

CSG Mike · 07-25-2022, 12:45 PM

DS2500? Just drive them normally, and they'll bed over time. No special procedure needed.

JRitt · 07-26-2022, 01:07 PM

It's not a problem to drive them around a bit before bedding. You won't hurt anything. If you don't get them bedded before you get to the track, just take the first few laps easy and progressively go harder. Let them cool a lap, then you should be good. The DS2500 is extremely easy to bed-in.

Also, please watch our videos on this topic. If you understand everything in these videos, you'll know everything you need to know on the topic:

07-22-2022, 07:22 AM	#1
Monroetwin Member Join Date: Nov 2021 Drives: 2022 GR 86 Premium Location: Midwest Posts: 33 Thanks: 14 Thanked 17 Times in 7 Posts Mentioned: 0 Post(s)	Bedding Brake Pads Quick novice question… Just had Ferodo DS2500 pads installed (with new fluid too). I need to bed the brake pads without access to a track. My plan is to try to do it in the parking lot at my work tomorrow. Question… Is there any issue using the brakes (lightly) driving around town between now and then? My work is about 15 miles from my house and there are several stop lights. My only other option would be to get up early and find an empty road (rural’ish) and hope to not get interrupted during the process… Thanks in advance!

07-23-2022, 07:01 PM	#7
Ultramaroon not playing cards Join Date: Sep 2014 Drives: a 13 e8h frs Location: vantucky, wa Posts: 32,392 Thanks: 53,053 Thanked 37,228 Times in 19,308 Posts Mentioned: 1118 Post(s)	Bedding is good if you smear pad on the rotors. Otherwise,... Your Meh May Vary __________________ service manuals

07-25-2022, 08:43 AM	#8
Autoxer62 Senior Member Join Date: Nov 2019 Drives: 2020 Hakone Location: Fairfax, VA Posts: 153 Thanks: 47 Thanked 72 Times in 53 Posts Mentioned: 0 Post(s)	I have generally bedded pads (autocross compounds mostly) with 10 hard applications from 40 to 15 on a light traffic street, then park the car overnight. Braking gets notably better at the end of the cycle. __________________ -- Bryan Blackwell -- 2020 Hakone 86 -- KW V2 6k&9k/Karcepts Sway Bars/SPC&Diftech RCLA/SuperPro bshngs/17x9 RPF1/255-40-17 RT660/Hawk5.0 Pads/RacerX MC Brace

07-26-2022, 01:07 PM	#10
JRitt Join Date: Feb 2012 Drives: 2012 BRZ Premium WRB 6MT Location: Charlotte NC Posts: 726 Thanks: 230 Thanked 1,423 Times in 381 Posts Mentioned: 81 Post(s)	It's not a problem to drive them around a bit before bedding. You won't hurt anything. If you don't get them bedded before you get to the track, just take the first few laps easy and progressively go harder. Let them cool a lap, then you should be good. The DS2500 is extremely easy to bed-in. Also, please watch our videos on this topic. If you understand everything in these videos, you'll know everything you need to know on the topic: __________________ Essex Parts Services- AP Racing / Ferodo / Spiegler / Versodeck Jeff Ritter\|Mgr.- High Performance Division www.essexparts.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bedding Carbotech Pads	larryt	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	12	06-13-2022 09:34 PM
Brake bedding vs. Subaru's break-in, and dust	OfficeWorker	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	6	03-07-2018 06:12 PM
Newb Brake bed-in (bedding?) question	BigFatFlip	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	8	08-16-2016 03:40 AM
bedding in brake pads in GTA area	FLYFISHR	CANADA	13	06-04-2016 10:42 AM
Squealing Tolerance Exceeded! Re-bedding Pads?	ShoShin	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	20	03-13-2014 02:37 PM

07-22-2022, 10:58 AM	#2
ZDan Senior Member Join Date: May 2011 Drives: '23 BRZ Location: Providence, RI Posts: 4,672 Thanks: 1,439 Thanked 4,012 Times in 2,098 Posts Mentioned: 85 Post(s)	Honestly I haven't had issues just bedding pads driving normally on the street and 1st session of the day at the track. I haven't tried any "bedding" procedures on the street for probably 15 years now! That's using a variety of pads from Carbotech, Winmax, Project Mu, and CSG, and swapping back/forth with various OEM and aftermarket "street" pads. No experience with Ferodo DS2500 though...

07-22-2022, 11:21 AM	#3
Code Monkey Senior Member Join Date: Jul 2016 Drives: Subaru BRZ Location: Atlanta, GA Posts: 879 Thanks: 987 Thanked 597 Times in 355 Posts Mentioned: 4 Post(s)	No problem driving around for a while before bedding them properly.

07-22-2022, 05:33 PM	#4
DrinkenBRZ Member Join Date: Mar 2022 Drives: 10 RX-8 Spt, 20 BRZ Ltd, 21 Rubicon Location: Colorado Posts: 44 Thanks: 29 Thanked 26 Times in 17 Posts Mentioned: 0 Post(s)	As these guys have said just drive to bed those pads. I only intentionally bed full, hard core compounds now.

07-23-2022, 06:26 AM	#5
Monroetwin Member Join Date: Nov 2021 Drives: 2022 GR 86 Premium Location: Midwest Posts: 33 Thanks: 14 Thanked 17 Times in 7 Posts Mentioned: 0 Post(s)	Ok. Good to know! Thanks for the responses!

07-25-2022, 12:45 PM	#9
CSG Mike Join Date: Jul 2012 Drives: S2000 CR Location: Orange County Posts: 14,564 Thanks: 8,942 Thanked 14,213 Times in 6,856 Posts Mentioned: 970 Post(s)	DS2500? Just drive them normally, and they'll bed over time. No special procedure needed.

User Name		Remember Me?
Password