Low profile jack

[8RZ]

Yep, as Ed said, I drive up on 2 2x4 blocks first and then jack the car up.

[Leonardo]

Originally Posted by 8RZ

Yep, as Ed said, I drive up on 2 2x4 blocks first and then jack the car up.

[DandoX]

I bought these while they where on sale, https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1


Then I use a normal jack to get my hand over the oil pan and unscrew the drain bolt. Then I lower it again onto the ramps to drain the oil. I found that these ramps on a typical driveway slope makes the car almost perfectly level.

[86prime]

Originally Posted by racetz39

I've also got a BRZ tS, my 3 ton jack just slips under the front lip and reaches the metal crossmember for jacking. Lifts nice and high too.
https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1

Will this Arcan jack clear the front lip?
https://smile.amazon.com/gp/product/...KIKX0DER&psc=1

It's low profile in front but increases in height toward the rear. Can't tell what the dimensions are.

[WNDSRFR]

Originally Posted by Willie Swoopes

Just got a Harbor Freight low profile Jack for my birthday yesterday.

Wife asked what I wanted and...

Steel 3 ton lowered 2-7/8 inch raised 19 1/2 inch about $90

Item #62326

Fits (with an inch of clearance) under the mostly stock 2017.

So today I'm doing oil changes! Any love for the Fumoto valve?

I've got this same jack too. They call it a 3 ton but it really only weighs about a ton.

[robotleader]

Originally Posted by 86prime

Will this Arcan jack clear the front lip?
https://smile.amazon.com/gp/product/...KIKX0DER&psc=1

It's low profile in front but increases in height toward the rear. Can't tell what the dimensions are.

nope you will need 2x4s first. and you can buy it at harbor freight for like $100.

[Muskoka800]

Originally Posted by edwardl

Two of these:

Exactly!!