Luxeon Fog lights wiring

[TagMaster11]

Can Fog lights be wired to where the DRLS where wired before?

[norcalpb]

Originally Posted by TagMaster11

Can Fog lights be wired to where the DRLS where wired before?

I had these fog lights and wondered the same thing. I always figured the DRL harness couldn’t provide enough voltage, but it’s worth a shot.

Diode dynamics was also unsure when I asked them.

[soundman98]

try it and let us know!

[Grady]

Voltage is not the issue, it is ability to provide enough amperage. You could always us the DRLS circuit to switch a relay. Have the fogs on their own circuit direct to battery or any other circuit with the ability to provide enough. Although this would make your fog lights operate like DRL.

[norcalpb]

Originally Posted by Grady

Voltage is not the issue, it is ability to provide enough amperage. You could always us the DRLS circuit to switch a relay. Have the fogs on their own circuit direct to battery or any other circuit with the ability to provide enough. Although this would make your fog lights operate like DRL.

I think he wants his fogs to operate like DRLs though.

[HaXx]

Originally Posted by TagMaster11

Can Fog lights be wired to where the DRLS where wired before?

The answer is yes, I believe. The 13 brz I have came factory with fogs and horizontal drl. Plus the boomerang drl. I swapped the drl and fog light pins on the connector so that my car thinks the drl is on, but really the fog is on, and vice versa. Th hunt made a video forever ago, and I did exactly what the video says. The thumbnail says "dealerships hate this hack" or something. I did this so i can run the boomerangs with the fogs at the same time. This may not be exactly what you're trying to accomish, but it stands to show that my fogs are powered by the drl wire. And they're stupid bright bajadesigns fogs, not junk.