How to fix squeaky clutch for good

[Ultramaroon]

Last time I had the trans out, I used a dremel to grind down the shelf left behind in the middle of the socket as the ball wore into it. Then I lapped the ball and socket a little to verify that where once was a shelf was now a tiny bit lower such that the only contact surface between the two was just outside that flat region on the ball. Used poor man's Prussian blue, a blue Sharpie. It works okay.

[Tcoat]

Originally Posted by Ultramaroon

Last time I had the trans out, I used a dremel to grind down the shelf in the middle of the socket left behind as the socket wore into the ball. Then I lapped the ball and socket a little to verify that where once was a shelf was now a tiny bit lower such that the only contact surface beteen the two was just outside that flat region on the ball.

Ball lapper!!!!!