Checking for ECU tune - List of good CVNs for CALIDs?

[Compelica]

Originally Posted by tomm.brz

intake and exhaust cam will help
also flkc and knock corr, usually it gets reduced tova minimum of -0,7 instead of -1 as minimum correction

injection angle if available, try to put many things, i dont know how torque works

Torque logs thru OBD2 PIDs, so I'm limited to the PIDs that is available in the OBD2 protocol... To log FLKC and knock correction, I know it can be done with a Tactrix cable/OFT, but then I would have solved this problem in the first place as I could take a dump of the maps

Meanwhile I have added more OBD2 PIDs to another log below, I will soon bust out Techstream for additional logging parameters - thanks for having a look @tomm.brz and for entertaining me

https://datazap.me/u/compelica/normal-run?log=1&data=8

[steve99]

Originally Posted by Compelica

Sorry @tomm.brz I can get you the other info... I was under the assumption you needed only those columns that you stated earlier.

Is there anything else you require other than engine speed?

Originally Posted by tomm.brz

intake and exhaust cam will help
also flkc and knock corr, usually it gets reduced tova minimum of -0,7 instead of -1 as minimum correction

injection angle if available, try to put many things, i dont know how torque works

Originally Posted by Compelica

Torque logs thru OBD2 PIDs, so I'm limited to the PIDs that is available in the OBD2 protocol... To log FLKC and knock correction, I know it can be done with a Tactrix cable/OFT, but then I would have solved this problem in the first place as I could take a dump of the maps

Meanwhile I have added more OBD2 PIDs to another log below, I will soon bust out Techstream for additional logging parameters - thanks for having a look @tomm.brz and for entertaining me

https://datazap.me/u/compelica/normal-run?log=1&data=8

It looks like a stock tune from AFR


https://datazap.me/u/compelica/norma...8&zoom=307-337


that section shows AFR measured richest is 12.16 which is stock AFR scaling. Also the commanded AFR goes way rich to 10.5 AFR like stock tune. most tuners will lean commanded arf to about 11.8 stock has commanded afr down to 10.5 or so most tunes cars dont target that low

[Compelica]

Originally Posted by steve99

It looks like a stock tune from AFR


https://datazap.me/u/compelica/norma...8&zoom=307-337


that section shows AFR measured richest is 12.16 which is stock AFR scaling. Also the commanded AFR goes way rich to 10.5 AFR like stock tune. most tuners will lean commanded arf to about 11.8 stock has commanded afr down to 10.5 or so most tunes cars dont target that low

Thanks @steve99 @tomm.brz for the insight.