p0030 issue A01I - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

gt7877 · 05-16-2020, 08:19 PM

Dear all

I have install aftermarket header for someone
2014 auto FRs. ...

ZA1JA01I

After few minutes engine light came
P0030
I have tune it stage 2 with Ecuflash
I disabled p0030
And all related o2 codes
But still keep coming even the code disabled from the map

What I can do
It take around 10-15 to show up

I return back to stock rom
When I turn switch on immediately cel show up same p0030
Crouse control stop
Sport mode disable
Gear changed hardly even I but it to manual mode

I have changed both O2 sensors but still same issue

Any idea??

Thnx

DarkPira7e · 05-16-2020, 08:22 PM

Find the definitions for B01 and see if it comes on. If it only comes on when you flash the car, it's something with the map

gt7877 · 05-16-2020, 08:24 PM

Quote:

Originally Posted by DarkPira7e

Find the definitions for B01C and see if it comes on.

B01c for manual

I use Steve xml for all my flashing

One for auto

One for manual

gt7877 · 05-16-2020, 08:25 PM

Quote:

Originally Posted by DarkPira7e

Find the definitions for B01 and see if it comes on. If it only comes on when you flash the car, it's something with the map

It's show up after some time

But after flashing to stock show up immediately before even drive it

DarkPira7e · 05-16-2020, 08:41 PM

Quote:

Originally Posted by gt7877

It's show up after some time

But after flashing to stock show up immediately before even drive it

Are you sure the sensors are plugged into the right connectors? Have you tried switching them for fun?

gt7877 · 05-16-2020, 09:11 PM

Quote:

Originally Posted by DarkPira7e

Are you sure the sensors are plugged into the right connectors? Have you tried switching them for fun?

R u sure

DarkPira7e · 05-16-2020, 09:22 PM

Quote:

Originally Posted by gt7877

R u sure

Basic troubleshooting starts with physical first. Good luck then.

tomm.brz · 05-16-2020, 10:35 PM

either is a electric link fail on the connector, or you damaged the sensor while installing in header, they re pretty fragile

gt7877 · 05-16-2020, 10:44 PM

Quote:

Originally Posted by tomm.brz

either is a electric link fail on the connector, or you damaged the sensor while installing in header, they re pretty fragile

I have changed both O2 sensors
Also I have returned to stock header

With stock rom but still same issue

This happened after installing aftermarket header and off stage 2 tune

I return everything to stock but still same 😭

gt7877 · 05-16-2020, 11:52 PM

Quote:

Originally Posted by solidsnake11

Did you check the Fuse??

Which one??
Location??
Photos if possible

Ultramaroon · 05-17-2020, 12:13 AM

Quote:

Originally Posted by gt7877

Which one??
Location??
Photos if possible

gt7877 · 05-17-2020, 12:22 PM

Thnx to all

It was 15amb fuses

solidsnake11 · 05-17-2020, 03:49 PM

Quote:

Originally Posted by gt7877

Thnx to all

It was 15amb fuses

"It aint got no gas in it" "ummhuh"

I guess you guys are too young to get that.
Its from a movie called "sling blade"

05-16-2020, 08:19 PM	#1
gt7877 Senior Member Join Date: Aug 2018 Drives: turbo frs Location: worldwide Posts: 173 Thanks: 122 Thanked 8 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	p0030 issue A01I Dear all I have install aftermarket header for someone 2014 auto FRs. ... ZA1JA01I After few minutes engine light came P0030 I have tune it stage 2 with Ecuflash I disabled p0030 And all related o2 codes But still keep coming even the code disabled from the map What I can do It take around 10-15 to show up I return back to stock rom When I turn switch on immediately cel show up same p0030 Crouse control stop Sport mode disable Gear changed hardly even I but it to manual mode I have changed both O2 sensors but still same issue Any idea?? Thnx

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Automatic Transmission issue- dealer is not recognizing the issue, please help!	Arrex	Issues \| Warranty \| Recalls / TSB	36	06-03-2019 05:15 AM
Paid $800+ for wheel speed sensor issue, but the issue came back. What should I do?	darkbluemn	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	4	02-05-2018 09:49 PM
P0134 and P0030->P0031	Howardwei	Software Tuning	7	12-08-2013 03:39 PM
CODE P0134 and P0030	Howardwei	Issues \| Warranty \| Recalls / TSB	2	11-06-2013 05:54 PM
Cel issue	Z06tofrs	Issues \| Warranty \| Recalls / TSB	2	08-27-2012 11:13 AM

05-16-2020, 08:22 PM	#2
DarkPira7e Rust bucket enthusiast Join Date: Feb 2017 Drives: 2013 Turbo Firestorm FRS Location: Vermont Posts: 4,052 Thanks: 3,307 Thanked 4,202 Times in 2,111 Posts Mentioned: 33 Post(s) Tagged: 0 Thread(s)	Find the definitions for B01 and see if it comes on. If it only comes on when you flash the car, it's something with the map

05-16-2020, 10:35 PM	#8
tomm.brz Senior Member Join Date: Jan 2017 Drives: brz 2017 hksv2 Location: italy Posts: 2,279 Thanks: 515 Thanked 1,121 Times in 811 Posts Mentioned: 70 Post(s) Tagged: 0 Thread(s)	either is a electric link fail on the connector, or you damaged the sensor while installing in header, they re pretty fragile

05-17-2020, 12:22 PM	#12
gt7877 Senior Member Join Date: Aug 2018 Drives: turbo frs Location: worldwide Posts: 173 Thanks: 122 Thanked 8 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Thnx to all It was 15amb fuses

User Name		Remember Me?
Password