Found magnetic bearings on exhaust manifold? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

SlowCarFast · 03-08-2020, 04:15 PM

So a rattle sounding sort of like an exhaust rattle started under the car a few weeks ago and I just now got the time to jack it up and investigate. The rattle is specifically at 4000 rpm and on throttle no where else.

I found what looks like some magnetic ball bearings and a 10mm (lol) socket stuck to the manifold after I dropped the skid plate. And ideas what these "bearings" could be from?

The car is a 15 BRZ with about 17k on the clock. Only mods are a perrin intake tube to delete the sound tube, oft stage 1 tune, and some fluids. I am the second owner and bought it with less that 5k on it. I am guessing it is something left over from the first owner. I know they had done some cosmetic mods to the car before returning it to stock when I bought it.

I just drove it after removing and the rattle is like 70% gone, but there is still a little something there, so I am going to have to drop the manifold and do some more investigating I guess.

http://imgur.com/a/FmjvWF5

NoHaveMSG · 03-08-2020, 04:22 PM

It's a muffler bearing

LimitedSlip · 03-08-2020, 04:24 PM

Sounds like you might have a blown manifold rotator cuff. Have you noticed any exhaust leaks?

Tcoat · 03-08-2020, 04:38 PM

Quote:

Originally Posted by LimitedSlip

Sounds like you might have a blown manifold rotator cuff. Have you noticed any exhaust leaks?

A what now?

14stu · 03-08-2020, 05:08 PM

Those "bearings" look just like small spherical magnets, they aren't part of the car and were probably being used to try to retrieve the socket you found.

SlowCarFast · 03-08-2020, 05:40 PM

Quote:

Originally Posted by 14stu

Those "bearings" look just like small spherical magnets, they aren't part of the car and were probably being used to try to retrieve the socket you found.

That's what I have been thinking, but I have no idea what kind of tool they would have gone to. I am just making sure that I have not missed something critical.

It is strange though that it took 3 years, over 10k miles, several autocross and a track day to dislodge that socket.

I will drop the manifold next and see if I can find any more balls.

humfrz · 03-08-2020, 06:27 PM

Bubba says that the previous owner most likely dropped the socket down there and it was rolling around making a sound that was bugging him, so he dropped the magnetic bearings down there to hold the socket in place so it doesn't roll around.

humfrz for Bubba

Back in the day, we used to put rocks in peoples hubcaps just to drive them nuts.

(OK, I'll go take ma meds -

)

Impureclient · 03-08-2020, 06:57 PM

I'd just put it all back up in there and let them gestate properly. You clearly just found the nest of a female 10mm socket and her eggs.
Everybody know they always disappear and wonder where the go to but never think where they come from in the first place.

86MLR · 03-08-2020, 07:02 PM

I'm going to cover my undertray with magnets and go hunting for 10mm sockets.

Tcoat · 03-08-2020, 08:00 PM

Quote:

Originally Posted by Impureclient

I'd just put it all back up in there and let them gestate properly. You clearly just found the nest of a female 10mm socket and her eggs.
Everybody know they always disappear and wonder where the go to but never think where they come from in the first place.

03-08-2020, 04:15 PM	#1
SlowCarFast Member Join Date: Apr 2017 Drives: 2015 BRZ Limited Location: Mid-South Posts: 47 Thanks: 6 Thanked 14 Times in 11 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Found magnetic bearings on exhaust manifold? So a rattle sounding sort of like an exhaust rattle started under the car a few weeks ago and I just now got the time to jack it up and investigate. The rattle is specifically at 4000 rpm and on throttle no where else. I found what looks like some magnetic ball bearings and a 10mm (lol) socket stuck to the manifold after I dropped the skid plate. And ideas what these "bearings" could be from? The car is a 15 BRZ with about 17k on the clock. Only mods are a perrin intake tube to delete the sound tube, oft stage 1 tune, and some fluids. I am the second owner and bought it with less that 5k on it. I am guessing it is something left over from the first owner. I know they had done some cosmetic mods to the car before returning it to stock when I bought it. I just drove it after removing and the rattle is like 70% gone, but there is still a little something there, so I am going to have to drop the manifold and do some more investigating I guess. http://imgur.com/a/FmjvWF5

03-08-2020, 06:27 PM	#7
humfrz Senior Member Join Date: May 2013 Drives: 2013 FR-S, white, MT Location: Puyallup, WA Posts: 30,432 Thanks: 29,826 Thanked 32,845 Times in 16,844 Posts Mentioned: 715 Post(s) Tagged: 2 Thread(s)	Bubba says that the previous owner most likely dropped the socket down there and it was rolling around making a sound that was bugging him, so he dropped the magnetic bearings down there to hold the socket in place so it doesn't roll around. humfrz for Bubba Back in the day, we used to put rocks in peoples hubcaps just to drive them nuts. (OK, I'll go take ma meds -)

03-08-2020, 07:02 PM	#9
86MLR Senior Member Join Date: Aug 2018 Drives: 2002 VX Commodore SS LS1 Auto Location: Sydney Posts: 2,203 Thanks: 500 Thanked 2,185 Times in 1,111 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	I'm going to cover my undertray with magnets and go hunting for 10mm sockets. Attached Images __________________ Disclaimer: This post represents the official views of the voices in my head at the time of posting. http://www.ft86club.com/forums/showthread.php?t=133311 I'm only here for the biscuits

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GReddy Exhaust Manifold???	Howaitoguru	Engine, Exhaust, Transmission	15	05-14-2019 07:46 PM
'14 stock BRZ exhaust components. Exhaust manifold/midpipe/axleback	giorgi0424	Engine, Exhaust, Bolt-Ons	3	11-22-2017 09:20 AM
Exhaust System/Exhaust Manifold Removal and Replacement	GrimmSpeed	DIY (Do-It-Yourself) Guides	52	11-11-2015 10:30 PM
What possible Leaks have you found/fixed under the Intake Manifold?	Cross	Forced Induction	8	05-21-2014 03:01 PM
Need factory exhaust manifold	dorifuto	Engine, Exhaust, Transmission	1	01-24-2013 02:05 PM

03-08-2020, 04:24 PM	#3
LimitedSlip Senior Citizen Member Join Date: Jul 2018 Drives: Then-1977 Celica GT Now-2017 860SE Location: In A Galaxy Far Far Away Posts: 393 Thanks: 145 Thanked 385 Times in 201 Posts Mentioned: 12 Post(s) Tagged: 1 Thread(s)	Sounds like you might have a blown manifold rotator cuff. Have you noticed any exhaust leaks?

03-08-2020, 06:57 PM	#8
Impureclient Banned Join Date: May 2015 Drives: 2015 FR-S Location: NPR, Florida Posts: 2,404 Thanks: 1,802 Thanked 2,903 Times in 1,282 Posts Mentioned: 25 Post(s) Tagged: 2 Thread(s)	I'd just put it all back up in there and let them gestate properly. You clearly just found the nest of a female 10mm socket and her eggs. Everybody know they always disappear and wonder where the go to but never think where they come from in the first place.

User Name		Remember Me?
Password